Optimization of the Process Parameters to Minimize the Surface Roughness in Drilling of CFRP Composites using Taguchi Method and RSM

Rodrigues, Lewlyn L R and Murthy, B R N (2013) Optimization of the Process Parameters to Minimize the Surface Roughness in Drilling of CFRP Composites using Taguchi Method and RSM. International Journal of Current Engineering and Technology, 3 (3). pp. 1007-1012. ISSN 2277 - 4106

[img] PDF
IJ-Optimization of the Process Parameters to Minimize the Surface Roughness in Drilling of CFRP Composites using Taguchi Method and RSM.pdf - Published Version
Restricted to Registered users only

Download (549kB) | Request a copy
Official URL: http://inpressco.com/category/ijcet

Abstract

Carbon Fiber Reinforced Polymer (CFRP) composites are finding wide application in all fields as they offer an excellent combination of strength, low weight and high modulus. The tensile strength of carbon fiber is equal to glass fiber while its modulus is about three to four times higher than glass fiber. Drilling is the most common machining operation performed on composites for the fabrication and the quality of hole has an important influence on its applications. In the present work, experiments were conducted to check the effect of drill point angle, spindle speed, feed rate and drill diameter on the surface roughness of the drilled hole. The Carbon Fiber Reinforced Polymer (CFRP) test specimen is prepared by hand-layup method. Design of Experiments (DOE) technique is used to design the drilling experiment procedure. The results have indicated that among the variables of study spindle speed has maximum influence on the surface finish of the drilled hole followed by the drill point angle. Feed rate has minimum influence on the quality of drilled hole. The research has also resulted in the listing of the optimum combination of process parameters using Response Surface Methodology (RSM) and Taguchi Method.

Item Type: Article
Uncontrolled Keywords: CFRP composite drilling, Surface roughness, DOE, RSM, Taguchi method.
Subjects: Engineering > MIT Manipal > Humanities and Management
Engineering > MIT Manipal > Mechanical and Manufacturing
Depositing User: MIT Library
Date Deposited: 04 Jun 2014 11:42
Last Modified: 04 Jun 2014 11:42
URI: http://eprints.manipal.edu/id/eprint/139658

Actions (login required)

View Item View Item