Effect of process parameters on tensile strength of riction stir Welded al-cu-mg-si-sicp composite

Prabhu, Subramanya R B and Shettigar, Arun Kumar and Rao, Karthik M C and Nigalye, Akshay and Herbert, Mervin A and Rao, Srikanth S (2015) Effect of process parameters on tensile strength of riction stir Welded al-cu-mg-si-sicp composite. International Journal of Researchers in Biosciences, Agriculture and Technology, 2 (7). pp. 5-10. ISSN 2347 – 517X

[img] PDF
279.pdf - Published Version
Restricted to Registered users only

Download (529kB) | Request a copy
Official URL: http://www.vmsindia.org

Abstract

In this study, application of friction stir welding (FSW) process to join stir casted aluminium–copper matrix-based composites reinforced with SiCp is investigated. FSW is a novel solid state joining technology in which a non-consumable rotating tool is used to produce frictional heat between the rotating tool and fixed work piece in order to make weld joint. The welding parameters such as welding speed, tool rotational speed, and profile of the tool were considered for analysis. An attempt is made to investigate the effect of process parameters of FSW the ultimate tensile strength (UTS) of the welded joints. Rotational speed, welding speed and tool pin profile in the order considered are found to be the major influencing parameters on the joint strength. Optimization of process parameters is carried out using Taguchi L18 orthogonal array design. Based on the analysis of variance, optimum process parameters are identified and validated by confirmation tests

Item Type: Article
Uncontrolled Keywords: Friction stir welding, Metal matrix Composite, Taguchi, Ultimate Tensile strength.
Subjects: Engineering > MIT Manipal > Mechanical and Manufacturing
Engineering > MIT Manipal > Mechatronics
Depositing User: MIT Library
Date Deposited: 05 May 2016 11:31
Last Modified: 05 May 2016 11:31
URI: http://eprints.manipal.edu/id/eprint/145971

Actions (login required)

View Item View Item