Static structural analysis of different stem designs used in total hip arthroplasty using finite element method

Chetan, K N and Zuber, Mohammad and Bhat, Shyamasunder N and Shenoy, Satish B and Kini, Chandrakant R (2019) Static structural analysis of different stem designs used in total hip arthroplasty using finite element method. Heliyon, 5 (6). pp. 1-8. ISSN 2405-8440

[img] PDF
6749.pdf - Published Version
Restricted to Registered users only

Download (1MB) | Request a copy
Official URL: http://www.heliyon.com

Abstract

Background: The Hip joint is the primary joint which gives stability to the human body. The wear and tear associated with age and other factors, require these joints to be replaced by implants using hip arthroplasty surgeries. Cobalt chromium alloy (CoCr), titanium alloy, stainless steel are some of the most common hip joint materials used for hip implants. The design requirement for hip joint implants are very stringent to avoid revision joint surgeries due to aseptic loosening. There are various choices in shapes and materials used for stem and acetabular designs. This makes it more difficult to make an informed decision on the type of design and material that can be used for hip implants. Methods: Circular, Oval, ellipse and trapezoidal designs with three individual cross sections (defined as profile 1, profile 2 and profile 3) are considered for the study. All models are modeled using CATIA V-6. Static structural analysis is performed using ANSYS R-19 to arrive at the best possible design and material combination for stem and acetabular cup. Results: It was found that, profile 2 of all the four designs has the lowest possible deformation and von Mises stress when compared to profile 1 and profile 2. In general, profile 2 with trapezoidal stem has best outcomes in terms of its mechanical properties. Besides, stem designed with material CoCr and its associated acetabular cup with CoC (ceramic on ceramic) material can produce an implant having better properties and longer durability. Conclusions: CoCr was found to be the preferred choice of material for stem design. It was also observed that, irrespective of material considered for the analysis profile 2 with trapezoidal stem showcased lesser deformation and von Mises stress over the other eleven models. For analysis involving acetabular cups, CoC implants exhibited better mechanical properties over the conventional CoPE (Ceramic on polyethylene) materials such as Ultra-high molecular weight polyethylene (UHMWPE). It is inferred from the findings of this study that, the profile 2 with trapezoidal stem design made of CoCr material and acetabular cup made of CoC material is best suited for hip joint implants

Item Type: Article
Uncontrolled Keywords: Bioengineering,Biomedical engineering,Mechanical engineering
Subjects: Engineering > MIT Manipal > Aeronautical and Automobile
Medicine > KMC Manipal > Orthopaedics
Depositing User: MIT Library
Date Deposited: 18 Jun 2019 10:50
Last Modified: 18 Jun 2019 10:50
URI: http://eprints.manipal.edu/id/eprint/153998

Actions (login required)

View Item View Item