Items where Author is "Kulkarni, S M"
Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 38.

Mohan, Nanjangud S and Bhat, Ritesh R and Kulkarni, S M (2018) Experimental Analysis of Surface Roughness While Drilling the Glass Fibre Reinforced Polymer Composite Materials using Response Surface Methodology. International Journal of Engineering and Technology(UAE), 7 (4.41). pp. 129-131. ISSN 2227-524X

Mohan, N S and Kulkarni, S M (2018) Influence of Drilling Parameters on Torque during Drilling of GFRP Composites Using Response Surface Methodology. In: International Joint Conference on Science and Technology IJCST, 27/09/2017, INDONESIA.

Mohan, N S and Kulkarni, S M (2018) Influence of Drilling Parameters on Torque during Drilling of GFRP Composites Using Response Surface Methodology. Journal of Physics: Conference Series, 953 (1). pp. 1-7. ISSN 17426588

Mohan, N S and Kulkarni, S M (2018) Influence of Drilling Parameters on Torque during Drilling of GFRP Composites Using Response Surface Methodology. In: International Joint Conference on Science and Technology (IJCST) 2017, 27/09/2017, Bali, Indonesia.

Mathias, Kevin Amith and Kulkarni, S M (2018) Investigation on Influence of Geometry on Performance of a Cavity-less Pressure Sensor. In: International Conference on Mechanics and Mechatronics Research, 19/07/2018, Tokyo Japan.

Mohan, N S and Kulkarni, S M (2017) Influence of Drilling Parameters on Torque during Drilling of GFRP Composites Using Response Surface Methodology. In: 2nd International Joint Conference on Science and Technology (IJCST), September 27 - 28, 2017, Bali, Indonesia.

Mathias, Kevin Amith and Kulkarni, S M (2017) Modelling and analysis of a cavity-less tyre pressure sensor with dielectric composite material. Manipal Journal of Science and Technolgoy, 1 (2). pp. 12-20.

Prabhu, P R and Sharma, S S and Jagannath, K and Gowri Shankar, M C and Kini, Achutha U and Kulkarni, S M (2016) Design of Experiment Based Approach to Optimize Turn-Assisted Deep Cold Rolling Process Parameters. International Journal of Industrial and Mechanical Engineering Sciences, 2 (1). pp. 17-23.

Prabhu, Raghavendra and Sharma, S S and Jagannath, K and Kumar, Krishna and Kulkarni, S M (2016) Surface Improvement of Shafts by Turn-Assisted Deep Cold Rolling Process. MATEC Web of Conferences, 77 (10006). pp. 1-4. ISSN 2261-236x

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K and Kini, Achutha U (2015) Analysis of Surface Hardness, Surface Roughness and Near Surface Microstructure of AISI 4140 Steel Worked with Turn-Assisted Deep Cold Rolling Process. In: International Conference on Mechanical, Aeronautical and Manufacturing Engineering, June 4-5, 2015, New York, USA.

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K and Kini, Achutha U (2015) Analysis of Surface Hardness, Surface Roughness, and Near Surface Microstructure of AISI 4140 Steel Worked with Turn-Assisted Deep Cold Rolling Process. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9 (6). pp. 999-1005.

Meenatchisundaram, S and Kulkarni, S M and Bhat, Somashekara (2015) Design Analysis and Sensitivity Enhancement of iezoresistive Micro Pressure Sensors. In: Proceedings of 2015 International Conference on Future Computational Technologies, March 29-30, 2015, Singapore.

Prabhu, P R and Sharma , S S and Kulkarni, S M and Gowri Shankar , M C (2015) Turn-assisted Deep Cold Rolling: An Innovative Manufacturing Method for the improvement of fatigue life. In: International Conference on Emerging Trends in Mechanical & Industrial Engineering, JULY 18, 2015, ITM University, Gurgaon, Haryana.

Prabhu, P R and Sharma, S S and Kulkarni, S M and Gowri Shankar, M C (2015) Turn-assisted Deep Cold Rolling: An Innovative Manufacturing Method for the improvement of fatigue life. International Journal of Applied Engineering Research, 10 (78). pp. 64-68. ISSN 0973-4562

Prabhu, P R and Sharma, S S and Jagannath, K and Gowri Shankar, M C and Kini, Achutha U and Kulkarni, S M (2014) Design of Experiment Based Approach to Optimize Turn-Assisted Deep Cold Rolling Process Parameters. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K (2014) Surface layer alterations in AISI 4140 steel from turn-assisted deep cold rolling process. International Journal Of Mechanical Engineering And Technology , 5 (9). pp. 245-250. ISSN 0976 – 6359

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K (2014) Surface layer alterations in AISI 4140 Steel from turn-assisted deep cold rolling process. In: Second international conference on Current Trends in Engineering and Management ICCTEM-2014, 17-19 July 2014, Vidyavardhaka College of Engineering, Mysore.

Meenatchisundaram, S and Simha, Ashwin and Menon, Mukund Kumar and Kulkarni, S M and Bhat , Somashekara (2012) Lumped Parameter Modeling of Absolute and Differential Micro Pressure Sensors. Sensors & Transducers Journal, 144 (9). pp. 76-91. ISSN 1726-5479

Prabhu, P R and Kulkarni, S M and Sharma , S S (2012) Influence of deep cold rolling and low plasticity burnishing on surface hardness and surface roughness of AISI 4140 steel. In: International Conference on Mechanical and Industrial Engineering (ICMIE 2010, August 25-27, Singapore.

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K and Bhat, Chandrashekhar (2012) Deep Cold Rolling Process on AISI 4140 Steel and Optimization of Surface Roughness by Response Surface Methodology. In: International Conference on Mechanical, Production and Materials Engineering (ICMPME'2012, June 16-17, Bangkok.

Prabhu, P R and Kulkarni, S M and Sharma , S S (2012) Experimental Investigations of Process Parameters Influence on Surface Roughness in Deep Cold Rolling of AISI 4140 Steel. International Journal of Research in Engineering and Technology, 1 (3). pp. 159-163. ISSN 2277 – 4378

Ananya, R B and Ashwin, S and Prahlad, E and Gurukar, Shravan H S and Kulkarni, S M and Meenatchisundaram, S (2012) Modeling and Analysis of Resonant beam Micro pressure Sensor. In: National Conference on Smart Materials Structures and Systems, September 21-22, 2012, Coimbatore, India.

Prabhu, P R and Kulkarni, S M and Sharma , S S (2011) Mechanical Surface Enhancement (MSE) Techniques for Fatigue Life Improvement-A Review. Journal of Manufacturing Engineering,, 6 (4). pp. 211-219.

Simha, Ashwin and Kulkarni, S M and Meenatchisundaram, S (2011) An Analytical Method to Determine the Response of a Micro Capacitive Pressure Sensor. Sensors & Transducers Journal, 130 (7). pp. 118-126. ISSN 1726-5479

Prabhu, P R and Kulkarni, S M and Sharma , S S (2011) The effects of deep cold rolling and low plasticity burnishing process on surface hardness of AISI 4140 steel. In: National Conference on Advances in Mechanical Engineering, 03 – 05 January, MIT Manipal.

Simha, Ashwin and Kulkarni, S M and Meenatchisundaram, S (2011) Comparison of various methods for the determination of resonant frequency of axially loaded MEMS resonator for pressure sensors. In: National Conference on Advances in Mechanical Engineering 2011, 03 – 05 January, 2011, MIT Manipal.

Prabhu, P R and Kulkarni, S M and Sharma , S S (2011) An Experimental Investigation on the Effect of Deep cold Rolling Parameters on Surface Roughness and Hardness of AISI 4140 Steel. World Academy of Science, Engineering and Technology, 60. pp. 1594-1598. ISSN 2010-3778

Simha, Ashwin and Kulkarni, S M and Bhat, Somesakara and Meenatchisundaram, S (2011) A Simple Displacement Function to Determine the Response of a Micro Capacitive Pressure Sensor. In: 2nd International conference on Methods and Models in Science & Technology, 19–20 November , Jaipur, India.

Prabhu, P R and Kulkarni, S M and Sharma , S S (2011) An investigation of the Surface topography of deep cold rolled aisi 4140 steel. In: National Conference on "Trends and Advances in Manufacturjng Engineering", 29-3rd' Sept.2011, TAME-20ll .

Prabhu, P R and Kulkarni, S M and Sharma , S S (2010) Development of a Low Cost Deep Cold Rolling (DCR)Set-up. In: International Conference on ‘Frontiers in Mechanical Engineering-FIME 2010’, 20-22 May, NITK, Surathkal.

Meenatchisundaram, S and Kulkarni, S M and Venkateswaran, P R and Uma, G (2010) Design Analysis and Surface Micromachining Fabrication of Differential Micro Pressure Sensors. In: International Conference on System Dynamics and Control, 20th to 21st August 2010, Manipal Karnataka.

Prabhu, P R and Kulkarni, S M and Sharma , S S (2010) Influence of deep cold rolling and low plasticity burnishing on surface hardness and surface roughness of AISI 4140 steel. World Academy of Science, Engineering and Technology, 72. pp. 619-624. ISSN 2010-3778

Mohan, N S and Kulkarni, S M and Ramachandran, Amar (2006) Optimization of process parameters during Drilling of glass-fiber polyester reinforced Composites using doe and anova. IIUM Engineering Journal, 7 (1). pp. 13-24. ISSN 1511-788X

Mohan, N S and Kulkarni, S M and Ramachandran, Amar (2005) Delamination analysis in drilling process of glass fiber reinforced plastic (GFRP) composite materials. Journal of Materials Processing Technology, 186. pp. 265-271.

Mohan, N S and Ramachandran, Amar and Kulkarni, S M (2005) Influence of process parameters on cutting force and torque during drilling of glass–fiber polyester reinforced composites. Composite Structures, 71. pp. 407-413.

Mohan, N S and Ramachandran, Amar and Kulkarni, S M (2005) Machining of Fiber-reinforced Thermoplastics: Influence of Feed and Drill Size on Thrust Force and Torque during Drilling. Journal of Reinforced Plastics and Composites. pp. 1-12.

Meenatchisundaram, S and Kulkarni, S M and Venkateswaran, P R and Uma, G and Umapathy, M (2002) Simulation and Optimization of Microresonators using Sugar and MOGA. Journal of International Association for Modelling and Simulation Technique in Enterprise, 82 (1). pp. 239-242.

Prabhu, P R and Kulkarni, S M and Sharma , S S Turning Aided Deep Cold Rolling - A Cost Effective Mechanical Surface Treatment Technique for Surface Hardness Enhancement. In: 3rd International Conference On Recent Advances in Material Processing Technology (RAMPT’13), 7th to 9th January 2013, Kovilpatti, Tamilnadu, India.

This list was generated on Fri Sep 20 16:29:00 2019 UTC.