MU Digital Repository
Logo

Items where Subject is "Engineering > MIT Manipal > Aeronautical and Automobile"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | Creators
Number of items at this level: 141.

Article

Dileep, M V and Kamath, Surekha and Nair, Vishnu G (2017) Ascent Phase Trajectory Optimization of Launch Vehicle Using Theta-Particle Swarm Optimization with Different Thrust Scenarios. International Review of Aerospace Engineering, 9 (6). pp. 200-207. ISSN 19737459

Pawlika, Mateusz and Ravishanker, Baliga B. and Shenoy, Satish B (2017) Comparative approach to knee endoprosthesis stem materials – static analysis of bone-implant system by the means of FEM. Journal of Computational Methods in Sciences and Engineering. pp. 261-267. ISSN 1472-7978

Zuber, Mohammad and Hisham, M S B and Nasir, N A M and Khader, Abdul S M (2017) A Computational Fluid Dynamics Study of Combustion and Emission Performance in an Annular Combustor of a Jet Engine. Pertanika Journal of Science and Technology, 25 (3). pp. 1019-1028. ISSN 01287680

Shivaprasad, U and Pai, Rammohan S and Pai, Yogesh P and Govardhan, D and Praveen, B (2017) Design and analysis of two throat wind tunnel. International Journal of Mechanical and Production Engineering Research and Development, 7 (4). pp. 381-388. ISSN 22498001

Binu, K G and Yathish, K and Shenoy, Satish B and Rao, Srikanth D and Pai, Raghuvir B (2017) Dynamic Performance Characteristics of Finite Journal Bearings Operating on TiO2 based Nanolubricants. Pertanika Journal of Tropical Agricultural Science, 25 (3). pp. 973-986. ISSN 1511-3701

Kamat, Harishkumar and Shenoy, Satish B and Kini, Chandrakant R (2017) Effect of V-shaped Ribs on Internal Cooling of Gas Turbine Blades. Journal of Engineering and Technological Sciences, 49 (4). pp. 519-532. ISSN 2337-5779

Anand, Shreyas and Pandey, Akshay and Sharma, Arpita and Kini, Chandrakant R (2017) Effect of trailing edge roundness on fx 63-137 And selig s1223 airfoil. ARPN Journal of Engineering and Applied Sciences, 12 (19). pp. 5494-5499. ISSN 1819-6608

Vidiya, Manthan and Singh, Balbir (2017) Experimental and Numerical Thermal Analysis of Formula Student Racing Car Disc Brake Design. Journal of Engineering Science and Technology Review, 10 (1). pp. 138-147. ISSN 1791-9320

Pai, Anand and Kini, Vijaya M and Pokharel, Vishesh (2017) Influence of a novel hardener p-toluene sulphonic acid on mechanical and wear response of phenolic based friction materials. Tribology Transactions, 60 (5). pp. 770-780. ISSN 1040-2004

Mahesha, G T and Shenoy, Satish B and Kini, Vijaya M and Bhat, Subrahmanya K (2017) Mechanical Characterization and Water Ageing Behavior Studies of Grewia Serrulata Bast Fiber Reinforced Thermoset Composites. Journal of Natural Fibers, 14 (6). pp. 788-800. ISSN 1544-0478

Kini, Chandrakant R and Mendonca, Royston Marlon and Yalamarty, Sai Sharan and Kamat, Harishkumar and Shenoy, Satish B (2017) Numerical Analysis of Helical Grooved Channels Near the Leading Edge Region in Gas Turbine Blade. International Review of Mechanical Engineering, 11 (3). pp. 161-166. ISSN 19708734

Zuber, Mohammad and Riazuddin, Vizy N. and Ahmada, Kamarul A. and Khader, Shah M A and Barsi, Adi A (2017) Numerical study of a nasal cavity model having a constricted pharyngeal section representing obstructive sleep apnea. Journal of Computational Methods in Sciences and Engineering, 17. pp. 219-226. ISSN 1472-7978

Chowdhury, Aditya and Nair, Vishnu G (2017) On the application of particle swarm optimization in minimum Time launch vehicle trajectory optimization problem. International Journal of Mechanical and Production Engineering Research and Development, 7 (5). pp. 359-366. ISSN 22498001

Chowdhury, Aditya and Nair, Vishnu G (2017) Optimization of pid controller gains of an aircraft pitch Control system using particle swarm optimization algorithm. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD, 7 (6). pp. 223-230. ISSN 2249-8001

Mallya, Ravindra and Shenoy, Satish B and Pai, Rammohan S and Pai, Raghuvir B (2017) Stability of water lubricated bearing using linear perturbation method under turbulent conditions. Pertanika Journal of Tropical Agricultural Science, 25 (3). pp. 995-1008. ISSN 1511-3701

Shenoy, Srinivas H and Nayak, Suhas Y and Vikas, Ramakrishna S and Kini, Vijaya M and Padmaraj, N H (2016) Investigation of Tensile Strength for Areca Frond/Corn Starch Composites. Indian Journal of Science and Technology, 9 (35). ISSN 0974-6846

Kini, Chandrakant R and Yalamarty, Sai Sharan and Mendonca, Royston Marlon and Sharma, Yagnesh N and Shenoy, Satish B (2016) CHT Analysis of Trailing Edge Region Cooling In HP Stage Turbine Blade. Indian Journal of Science and Technology, 9 (6). pp. 1-6. ISSN 0974-6846

Singh, Diksha Diva and Nair, Vishnu G and Dileep, M V (2016) Minimum Time Ascent Phase Trajectory Optimization using Steepest Descent Method. International Journal of Control Theory and Applications, 9 (39). pp. 71-76. ISSN 09745572

Lawrence, Deepak K and Ramamoorthy, B (2016) Multi-surface topography targeted plateau honing for the processingof cylinder liner surfaces of automotive engines. Applied Surface Science, 365. pp. 19-30. ISSN 0169-4332

Kini, Chandrakant R and Kamat, Harishkumar and Shenoy, Satish B (2016) Numerical Simulation of Internal Cooling Effect of Gas Turbine Blades using Twisted Tape Inserts. Indian Journal of Science and Technology, 9 (31). ISSN 0974-6846

Dileep, M V and Kamath, Surekha and Nair, Vishnu G (2016) Optimal Trajectory Generation for the Ascent Phase of Launch Vehicle Using θ-PSO Approach. International Journal of Control Theory and Applications, 9 (39). pp. 95-101. ISSN 09745572

Mahesha, G T and Satish Rao, S B and Vijaya, K M and Bhat, K S (2016) Preparation of Unidirectional Grewia Serrulata Fiber-Reinforced Polyester Composites and Evaluation of Tensile and Flexural Properties. Journal of Natural Fibers, 13 (5). pp. 547-554. ISSN 1544-0478

Mallya, Ravindra and Shenoy, Satish B and Pai, Raghuvir B (2016) Static characteristics of misaligned multiple axial groove water-lubricated bearing in the turbulent regime. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. pp. 572-578. ISSN 1350-6501

Kini, Chandrakant R and Shenoy, Satish B and Sharma, Yagnesh N (2016) Thermo-Structural Investigation of Gas Turbine Blade Provided with Helicoidal Passages. Indian Journal of Science and Technology, 9 (20). ISSN 0974-6846

Lawrence, Deepak K and Ramamoorthy, B (2016) An accurate and robust method for the honing angle evaluation of cylinder liner surface using machine vision. International Journal of Advanced Manufacturing Technology, 55. pp. 611-621. ISSN 0268-3768

Sharma, Akash and Alva, Tejas and Srinivas, G (2015) Comparative Study And CFD Analysis of Blended Wing Body (BWB). International Journal of Science Technology & Engineering, 1 (12). pp. 228-233. ISSN 2349-784X

Binu, K G and Yathish, K and Mallya, Ravindra and Shenoy, Satish B and Rao, Srikanth D and Pai, Raghuvir B (2015) Experimental study of hydrodynamic pressure distribution in oil lubricated two-axial groove journal bearing. Materials Today: Proceedings 2, 2. pp. 3453-3462.

Yathish, K and Binu, K G and D'Silva, Rolvin S and Shenoy, Satish B and Pai, Raghuvir B (2015) Static Characteristics of Two-Axial Groove Journal Bearing Operating on TiO2 Nanolubricant. Journal of Mechanical Engineering and Automation, 5 (3B). pp. 94-99.

Mascarenhas, Rohan and Chatra, Laxmikanth and Shenoy, Satish B and Husain, Akhter and Mathew, Jenny Mary and Parveen, Shahista (2015) A comparative study of forces in labial and lingual orthodontics using finite element method. Journal of Indian Orthodontic Society, 49 (1). pp. 15-18. ISSN 0974-9098

Srinivas, G and Mahesha, G T and Chethan, K N and Arjun, N (2014) Analysis of Wind Turbine Blade. International Journal of Current Engineering and Technology (2). pp. 358-362. ISSN 2277 - 4106

Kini , Chandrakant R and Shenoy, Satish B and Sharma, Yagnesh N (2014) Thermo-structural analysis of HP stage gas turbine blades having helicoidal cooling ducts. International Journal of Advancements in Mechanical and Aeronautical Engineering, 1 (2). pp. 57-60. ISSN 2372-4153

Harshavardhana, N S and Sanjana, K and Sai Sharan, K and Srinivas, G (2014) Computational Flow Analysis Of Hypersonic Reentry Blunt Body Using Fluent And Gambit. International Journal of Scientific & Engineering Research, 5 (5). pp. 262-269. ISSN 2229-5518

Srinivas, G (2014) Numerical simulation of centrifugal compressor. ARPN Journal of Engineering and Applied Sciences, 9 (5). pp. 639-645. ISSN 1819-6608

Rakham, Bhupal and Srinivas, G (2014) Flap Architecture by Morphing Trailing Edges. International Journal of Current Engineering and Technology (2). pp. 388-392. ISSN 2277 - 4106

Dileep, M V and Nair, Vishnu G and Prahlad, K R and Kamath, Surekha (2014) Trajectory Optimization of Launch Vehicles Using Steepest Descent Method – A Novel Approach. International Journal of Engineering Research and Applications, 4 (1). pp. 116-121. ISSN 2248-9622

Srinivas, G and Gowda, Madhu B P (2014) Aerodynamic performance comparison of airfoils by Varying angle of attack using fluent and gambit. Applied Mechanics and Materials, 592-59. pp. 1889-1896.

Mascarenhas, Rohan and Revankar, Ameet V and Mathew, Jenny Mary and Chatra, Laxmikanth and Husain, Akhter and Shenoy, Satish B (2014) Effect of intrusive and retraction forces in labial and lingual orthodontics: A fi nite element study. APOS Trends in Orthodontics, 4 (2). pp. 36-39.

Lawrence, Deepak K and Shanmugamani, Rajalingappaa and Ramamoorthy, B (2014) Evaluation of image based Abbott–Firestone curve parameters using machine vision for the characterization of cylinder liner surface topography. Measurement - Journal of the International Measurement Confederation, 55. pp. 318-334.

Mallya, Ravindra and Shenoy, Satish B and Pai, Raghuvir B (2014) Experimental Challenges and Solutions in Design and Operation of the Test Rig for Water Lubricated Journal Bearing. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 8 (11). pp. 1688-1691.

Shenoy, Srinivas H and Kini, Vijaya M and Pai, Raghuvir B and Shenoy, Satish B and Rao, Sathish U and Kini, Achutha U (2014) Flexural Strength Analysis of Starch Based Biodegradable Composite using Areca Frond Fibre Reinforcement. International Journal of Manufacturing Engineering.

Srinivas, G and Potti Srinivasa, Rao (2014) Numerical Simulation of Rocket Nozzle. Advanced Materials Research, 984985. pp. 1210-1213. ISSN 1662-8985

Binu, K G and Shenoy, Satish B and Rao, Srikanth D and Pai, Raghuvir B (2014) Static characteristics of a fluid film bearing with TiO2 based nanolubricant using the modified Krieger–Dougherty viscosity model and couple stress model. Tribology International, 75. pp. 69-79. ISSN 0301-679X

Mallya, Ravindra and Shenoy, Satish B and Pai, Raghuvir B (2014) Steady state characteristics of misalignedmultiple axial groove water-lubricated journal bearing. Journal of Engineering Tribology, 229 (6). pp. 712-722.

Yathish, K and Binu, K G and Shenoy, Satish B and Rao, Srikanth D and Pai, Raghuvir B (2014) Study of TiO2 Nanoparticles as Lubricant Additive in Two-Axial Groove Journal Bearing. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 8 (11). pp. 1723-1729.

Mahesha, G T and Shenoy, Satish B and Padmaraj, N H and Chethan, K N (2014) Synthesis and Mechanical Characterization of Grewia Serrulata Short Natural Fiber Composites. International Journal of Current Engineering and Technology. pp. 43-46. ISSN 2277 - 4106

Binu, K G and Shenoy, B S and Rao, Srikanth D and Pai, Raghuvir B (2014) A variable Viscosity Approach for the Evaluation of load Carrying Capacity of oil lubricated Journal Bearing with TiO2 Nanoparticles as lubricant Additives. Procedia Materials Science, 6. pp. 1051-1067. ISSN 2211-8128

Khader, Abdul S M and Pai, Raghuvir B and Ayachit, Anurag and Ahmed, K A and Rao, V R K and Kamath, Ganesh S (2013) Comparative Study of Blood Flow through Normal and Stenosed Common Carotid Artery Using Fluid-Structure Interaction. International Journal of Earth Sciences and Engineering, 6 (4). pp. 866-871. ISSN 0974-5904

Prabhu, Satish and Nayak, Gurudas C and Shenoy, Satish B (2013) Water desalinationusing using Renewable Energy Sources. Asian Academic Research Journal of Multidisciplinary, 1 (12). pp. 395-404. ISSN 2319-2801

Jain, Nishanth and Atreja, Isha and Shenoy, Satish B (2013) Biomimetic Flapping Wing Aerial Vehicle. International Journal of Advancements in Mechanical and Aeronautical Engineering, 1 (1). pp. 5-9. ISSN 2372-4153

Padmaraj, N H and Kini, Vijaya M and Pai, Raghuvir B and Shenoy, Satish B (2013) Development of Short Areca Fiber Reinforced Biodegradable Composite Material. Procedia Engineering, 64. pp. 966-972.

Padmaraj, N H and Kini, Vijaya M and Pai, Raghuvir B and Shenoy, Satish B (2013) Development of Short Areca Fiber Reinforced Biodegradable Composite Material. Procedia Engineering, 64. pp. 966-972.

Umananda, K V and Shetty, Divakara S and Sharma , S S (2013) Study of Mechanical and Corrosion Properties of AISI 50110 (EN31) Steel with and without Heat Treatment. International Journal of Mechanical Engineering & Research, 3 (5). 396 -400. ISSN 2249 - 0019

Lawrence, Deepak K and Ramamoorthy, B (2013) Surface topography characterization of automotive cylinder liner surfaces using fractal methods. Applied Surface Science, 280. pp. 332-342. ISSN 0169-4332

Baliga, Ravishanker B and Shenoy, Satish B and Rao, Sathish U and Bhat, Vijendra V (2013) Synthesis and Mechanical Characterization of C.N.F Reinforced PUC composite. International Journal of Chemical and Environmental and Biological Sciences(IJCEBS), 1 (4). pp. 697-700. ISSN 2320-4079

Shivaprasad, U and Srinivas, G (2012) Flow Simulation over Re-Entry Bodies at Supersonic & Hypersonic Speeds. International Journal of Engineering Research and Development, 2 (4). pp. 29-34. ISSN 2278-067X

Shenoy, Satish B and Binu, K G and Pai, Raghuvir B and Rao, Srikanth D and Pai, Rammohan S (2012) Effect of Nanoparticles additives on the performance of an externally adjustable fluid film bearing. Tribology International, 45 (1). pp. 38-42. ISSN 0301-679X

Nair, Vishnu G and Dileep, M V and George, V I (2012) Aircraft Yaw Control System using LQR and Fuzzy Logic Controller. International Journal of Computer Applications, 45 (9). pp. 25-30. ISSN 0975 – 8887

Pai, Dayananda and Rao, Shrikantha S and Shetty, Raviraj (2012) Application of taguchi and response surface methodologies for metal removal rate and surface roughness in grinding of drac’s. International journal of Engineering and Management, 3 (1). ISSN 2229-600X

Santosh, K and Shivaprasad, U and Srinivas, G and Manikandan, M (2012) Computational Analysis of Hypersonic Flow Field Over Re-Entry Bodies. International Journal of Systems, Algorithms & Applications, 2. pp. 36-38. ISSN 2277-2677

Kini , Chandrakant R and Shenoy, Satish B and Sharma, Yagnesh N (2012) Computational Conjugate Heat Transfer Analysis of HP Stage Turbine Blade Cooling:Effect of Turbulator Geometry in Helicoidal Cooling Duct. World Academy of Science, Engineering and Technology, 2012 (70). pp. 645-652. ISSN 2010-3778

Nair, Vishnu G and Dileep, M V and Prahlad, K R (2012) Design of Fuzzy Logic Controller for Lateral Dynamics Control of Aircraft by Considering the Cross-Coupling Effect of Yaw and Roll on Each Other. International Journal of Computer Applications, 47 (13). pp. 43-48. ISSN 0975 – 8887

Rodrigues, Lewlyn L R and Kantharaj, A N and Kantharaj, B and Freitas, W R C and Murthy, B R N (2012) Effect of Cutting Parameters on Surface Roughness and Cutting Force in Turning Mild Steel. Research Journal of Recent Sciences, 1 (10). pp. 19-26. ISSN 2277-2502

Fernandes, Neville and Shenoy, Satish B and Pai, Raghuvir B and Pai, Rammohan S and Rao, Srikanth D (2012) Evaluation of Stiffness and Damping Coefficients of Multiple Axial Groove Water Lubricated Bearing Using Computational Fluid Dynamics. World Academy of Science, Engineering and Technology, 70. pp. 1180-1185. ISSN 2010-3778

Akula, Praveen Kumar and Singh, Balbir and Manikandan, M and Srinivas, G (2012) Influence of Tip clearance on the turbulent aerodynamics of axial flow fan under off design conditions. Applied Mechanics and Materials, 232. pp. 223-227.

Nair, Vishnu G and Dileep, M V and Prahlad, K R (2012) New Programming Approach for Steepest Descent Optimization of Rocket Trajectories. International Journal of Computer Applications, 48 (19). pp. 21-27. ISSN 0975 – 8887

Kini , Chandrakant R and Shenoy, Satish B and Sharma, Yagnesh N (2012) Numerical Analysis of Gas Turbine HP Stage Blade Cooling with New Cooling Duct Geometries. International Journal of Earth Sciences and Engineering, 5 (4). pp. 1057-1061. ISSN 0974-5904

Akula, Praveen Kumar and Singh, Balbir and Nair, Vishnu G (2012) Numerical Sensitivity Analysis of Axial Flow Fan 3D Aerodynamics Under Off Design Conditions. Applied Mechanics and Materials, 225. pp. 8-12.

Pai, Raghuvir B and Rao, Srikanth D and Shenoy, Satish B and Pai, Rammohan S (2012) Stability Characteristics of a Tri-taper Journal Bearing: a Linearized Perturbation Approach. Journal of Materials Research and Technology.

Pai, Dayananda and Rao, Shrikantha S and Kini, Savitha G (2012) Study on Specific Energy in Grinding of DRACs: A Response Surface Methodology Approach. World Academy of Science, Engineering and Technology, 70. pp. 1281-1284. ISSN 2010-3778

Shenoy, Satish B and Pai, Raghuvir B (2011) Effect of Turbulence on the Static performance of a Misaligned externally Adjustable fluid film bearing Lubricated with couple stress fluids. Tribology International, 44 (12). pp. 1774-1781. ISSN 0301-679X

Pai, Dayananda and Rao, Shrikantha S and Shetty, Raviraj (2011) Application of Statistical Tool for Optimisation of Specific Cutting Energy and Surface Roughness on Surface Grinding of Al-SiC35p Composites. International Journal of Science and statistical computing, 2 (1). ISSN 2180-1339

Shenoy, Satish B and Pai, Raghuvir B (2011) Dynamic Characteristics of a single pad externally adjustable fluid film bearing. Industrial Lubrication and Tribology, 63 (3). pp. 146-151. ISSN 0036-8792

Pai, Dayananda and Rao, Shrikantha S and D’Souza, Rio (2011) Multi Objective Optimization of Surface Grinding Process by Combination of Response Surface Methodology and Enhanced Non-dominated Sorting Genetic Algorithm. International Journal of Computer Applications, 36 (3). pp. 19-24. ISSN 0975 – 8887

Rao, Srikanth D and Shenoy, Satish B and Pai, Rammohan S and Pai, Raghuvir B (2010) Stability of Tri-taper journal bearings under Dynamic load using a Non-linear Transient method. Tribology International, 43 (9). pp. 1584-1591. ISSN 0301-679X

Murthy, Krishna and Mahesha, G T and Rao , Shrinivasa B R and Samaga, B S (2010) Application of EGR for NOx Control in LPG - Diesel Dual Fuel CI Engine. International Journal of Advances in Thermal Sciences and Engineering, 1. pp. 37-43. ISSN 0976-6820

Pai, Dayananda and Rao, Shrikantha S and Shetty, Raviraj and Nayak, Rajesh (2010) Application of response surface methodology on surface roughness in grinding of aerospace materials (6061Al-15Vol%SiC25P). ARPN Journal of Engineering and Applied Sciences, 5 (6). ISSN 1819-6608

K.G, Binu and Shenoy, Satish B and Rao, Srikanth D and Pai, Raghuvir B (2010) Stability characteristics of journal bearing systems lubricated with couple stress fluids using the non linear transient approach. Journal of Tribology and Surface Engineering, 3 (1&2). pp. 51-66. ISSN 1949-4866

Shenoy, Satish B and Pai, Raghuvir B (2009) Stability Characteristics of an Externally Adjustable Fluid Film Bearing in the Laminar and Turbulent Regimes. Tribology International, 43 (9). pp. 1751-1759. ISSN 0301-679X

Kini, Vijaya M and Pai, Rammohan S and Rao, Srikanth D and Shenoy, Satish B and Pai, Raghuvir B (2009) Effect of groove location on the dynamic characteristics of multiple axial groove water lubricated journal bearing. Special Journal , 60 (127). pp. 736-740. ISSN 2010-3778

Shenoy, Satish B and Pai, R S and Rao, Srikanth D and Pai, Rammohan S (2009) Elasto-hydrodynamic lubrication analysis of full 360� journal bearing using CFD and FSI techniques. World Journal of Modelling and Simulation, 5 (4). pp. 315-320. ISSN 1746-7233

Shenoy, Satish B and Pai, Raghuvir B (2009) Performance Evaluation of a Single Pad Externally Adjustable Fluid Film Bearing. Australian Journal of Mechanical Engineering, 7 (2). pp. 35-46. ISSN 1448-4846

Pai, Rammohan S (2008) Non-linear transient analysis of multiple axial groove water-lubricated journal bearings. Proceeding International Mechanical Engieering, 222 (J4). pp. 549-557.

Pai, Rammohan S and Pai, Raghuvir B (2008) Stability of four-axial and six-axial grooved water-lubricated journal bearings under dynamic load. Proceedings of International Mechanical Engineering, 222 (J4). pp. 683-691.

Kini, Chandrakant R and Kamat, Harishkumar and Shenoy, Satish B Effect of Twisted Tape Inserts and Stacks on Internal Cooling of Gas Turbine Blades. Indian Journal of Science and Technology, 9 (31). ISSN 0974-6846

Conference or Workshop Item

Ved, Merchant and Jayakrishnan, Radhakrishnan (2017) Design and Optimization of Supersonic intake. In: International conference on Materials, Alloys and Experimental Mechanics, 2017, Narashimha Reddy Engineering college, Secundrabad.

Kamat, Harishkumar and Kini, Chandrakant R and Sharma, Yagnesh N (2017) FSI Analysis of trailing edge region cooling in hp stage turbine blade. In: International conference on mechanical and aeronautical engineering, 18/01/2017, Bangkok, Thailand, Jan 18-19, 2017.

Padmaraj, N H and Chethan, K N and Anand, Onkar (2017) Fatigue Behaviour and Life Assessment of Jute-epoxy Composites under Tension-Tension Loading. In: IOP Conf. Series: Materials Science and Engineering, 03/07/2017, Narsimha Reddy Engineering College, Dhulappally Po.

Srinivas, G and Raghunandana, K and Shenoy, Satish B (2017) Flow Blockage in a Transonic Axial Flow Compressor: Simulation Analysis under Distorted Conditions. In: CISCON 2013, 03/11/2017, MIT, Manipal.

Yadav, Arvind Kumar and Kumar, Kamlesh and Becker, Richard (2017) In-flight Re-Configurable Systems. In: International Conference on Advancements in Aeromechanical, 07/07/2016, MLR Institute of Technology in Hyderabad, India.

Kumar, Ajay J K and Bharath, Vishnu R and Srinivas, G (2017) Recent Trends in Theoretical, Experimental and Numerical Techniques of Axial Flow Compressor in Aircraft Industry. In: CISCON 2013, 03/11/2017, MIT, Manipal.

Pai, Dayananda and Prabhu, Mihir K (2017) Recent advances in substrate materials and thermal analysis of catalytic converters. In: International Conference on Advances in Materials and Manufacturing Applications, 17/08/2017, Amrita School of Engineering, Bangalore, Karnataka.

Pai, Dayananda and Prabhu, Mihir K (2017) Recent advances in substrate materials and thermal analysis of catalytic converters. In: International Conference on Advances in Materials and Manufacturing Applications, 17/08/2017, Amrita School of Engineering, Bangalore, Karnataka.

Srinivas, G and Raghunandana, K and Shenoy, Satish B (2017) Recent developments in turbomachinery component materials and manufacturing challenges for aero engine applications. In: International Conference on Advances in Metallurgy, Materials and Manufacturing, 06/03/2017, Hotel CJ Pallajio Salem.

Goswami, Tanusha and Iyer, Srinivas Ramesh and Singh, Nitesh Kumar and Yadav, Kumud Darshan and Shekar, Spoorthi and Singh, Balbir (2017) Space Debris Removal Using an Automated Capturing and Self Stabilizing System, C.L.E.O. In: International Conference on Mechanical and Aerospace Engineering (ICMAE 2010), 22/07/2017, Prague, Czech Republic.

Srinivas, G and Prakash, M V S (2016) Aerodynamics and Flow Charecterisation of Multistage Rockets. In: International Coference on Frontiers in Automobile and Mechanical Engineering, 07/07/2016, Sathyabama University, Chennai.

Kanaparthi, Abhishek and Kumar, Laxman K (2016) Computational Simulation of Enhancement ofMixing efficiency of Micromixer. In: Manipal Research Colloquium, 04/04/2016, Manipal.

Srinivas, G and Rakham, Bhupal (2016) Experimental and Numerical Analysis of Convergent Nozzle. In: International Conference on Frontiers in Automobile and Mehanical Engineering, 07/07/2016, Sathyabama University, Chennai.

Pai, Raghuvir B and Shenoy, Satish B and Kini, Vijaya M (2016) Performance Evaluation of Labyrinth Seals. In: EDF Pprime Workshop 'Wear and Life Time of Seals', 06/10/2016, Universite De Poitiers,Poitiers, France.

Nithin, B and Ladeesh, V G and Aneesh, T and Manu, R and Deepak, L (2016) Process Modelling and Investigations in to the Electrochemical Discharge Drilling (ECDD) of Soda-Lime-Silicon- Glass. In: International Conferrence on production and industrial engineering, 19/12/2016, DR B R AMBEDKAR NATIONAL OF TECHNOLOGY JALANDHAR.

Srinivas, G and Raghunandana, K and Shenoy, Satish B (2016) Recent Developments of Axial Flow Compressors Under Transonic flow Conditions. In: International Conference on Frontiers in Automobile and Mechanical Engineering, 17/06/2016, Sathyabama University, Chennai.

Baliga, Ravishanker B and Reddy, Pavan and Pandey, Pankaj (2016) Synthesis and Wear Characterization of CNF-UHMWPE Nanocomposites for Orthopaedic Applications. In: International Conference on Smart Engineering Materials, 20/10/2016, RV College of Engineering, Bangalore.

Dileep, M V and Kamath, Surekha and Nair, Vishnu G (2015) Optimal trajectory generation of launch vehicle using PSO algorithm. In: 1st International Conference on Futuristic trend in Computational Analysis and Knowledge Management.

Dileep, M V and Kamath, Surekha and Nair, Vishnu G (2015) Particle Swarm Optimization Applied to Ascent Phase Launch Vehicle Trajectory Optimization Problem. In: Eleventh International Multi-Conference on Information Processing, 21/08/2015, Bengaluru.

Shivaprasad, U and Reddy, Sree Vaibhav KM (2015) Three dimensional computational analysis of fluid structure interaction over a finite wing. In: Proceedings of International Conference on Mechanical and Aeronautical Engineering, July 15-16, 2015.

Pawlik, Mateusz and Baliga, Ravishanker B and Shenoy, Satish B and Pai, Raghuvir B (2014) Comparative approach to knee endoprosthesis stem materials –static analysis of bone-implant system by the means of FEM. In: Proceedings of International Conference on compputational Methods in Engineering and Health Sciences, December 17-19 ,2014, Manipal.

Pawlik, Mateusz and Baliga, Ravishanker B and Shenoy, Satish B and Pai, Raghuvir B (2014) Comparative static analysis of knee endoprosthesis implants for shor and long stem lengths by the means of FEB. In: Proceedings of International conference on Computational Methods in Engineering and Health Sciences, December 17-19 2014, Manipal.

Pawlik, Mateusz and Baliga, Ravishanker B and Pai, Raghuvir B and Pai, Sathish B (2014) FEM static analysis of knee endoprostheses implant systems for short and long stem lengths. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Pai, Anand and Kedarnath, Moparthi and Baliga, Ravishanker B and Chethan, K N (2014) 2D Combustion Simulation of Alkyl Ethers as Alternative Fuels in Compression Ignition Engines. In: International Conference on Computational methods in engineering and health sciences (ICCMEH), 19/12/2014, MIT, MANIPAL.

Pawlik, Mateusz and Baliga, Ravishanker B and Shenoy, Satish B and Pai, Raghuvir B (2014) Comparative approach to knee endoprosthesis stem materials – static analysis of bone-implant system by the means of FEM. In: International Conference on Computational methods in engineering and health sciences (ICCMEH), 19/12/2014, MIT, MANIPAL.

Shenoy, Satish B and Pai, Rammohan S and Rao, Srikanth D and Kini, Vijaya M and Pai, Raghuvir B (2014) Comparison of Dynamic characteristics of 3-axial groove water lubricated bearing with typical water based lubricant. In: International Conference on Environment and Sustainable Technologies (iCEST-2014), January 03-05, 2014, MIT, Manipal, India.

Pai, Rammohan S and Shenoy, Satish B and Rao, Srikanth D and Pai, Raghuvir B (2014) Comparison of Static and Dynamic characteristics of 4-axial and 6-axial groove water lubricated journal bearings: Reynolds and JFO Models. In: National conference on Advanced Aerial/Road Vehicle and its applications, 18 - 19, 2014, MIT, Manipal, India..

Pai, Rammohan S and Rao, Srikanth D and Shenoy, Satish B and Kini, Vijaya M and Pai, Raghuvir B (2014) Comparison of Static characteristics of 3-axial groove water lubricated bearing with water based lubricant. In: International Conference on Environment and Sustainable Technologies (iCEST-2014), January 03-05, 2014, MIT, MIT, Manipal, India.

Krishna Kumar, P and Adhikari, Raviraj and Prabhu, P R and Keni, Laxmikanth (2014) Deep cold rolling simulation of AISI 4140 steel using ANSYS LSDYNA. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Pai, Rammohan S and Shenoy, Satish B and Rao, Srikanth D and Pai, Raghuvir B (2014) Dynamic Characteristics of 3 –Axial Groove Journal Bearings Lubricated With Water Based Lubricant. In: Proceedings of International conference on Computational Methods in Engineering and Health Sciences, December 17-19 2014, Manipal.

Manikandan, M and Shivaprasad, U and Suvarna, Ashish Ashok and Bhat, Anuj B and Nair, Vinayak and Shivakrishna, Gunda (2014) External Aerodynamic Analysis of TATA Nano using Numerical Tool. In: International Conference on Advances in Mechanical Sciences, 16/01/2014, Vardhaman college of engineering ,Shamshabad.

Madhwesh, N and Mahesha, G T and Murthy, Krishna and Rao , Shrinivasa B R (2014) LPG as an alternative fuel for dual fuel compression ignition engine. In: confer, MIT Maniapl University, Manipal.

Kini, Vijaya M and Pai, Rammohan S and Shenoy, Satish B and Rao, Srikanth D and Pai, Raghuvir B (2014) Non-linear transient analysis for 3-axial groove water based lubricant. In: International Conference on Environment and Sustainable Technologies (iCEST-2014), January 03-05, 2014, MIT, Manipal, India..

Singh, Kunwardeep Khanna and Umananda, K V (2014) Optimization of a Suspension Geometry of a Solar Car. In: International Conference on Computational Methods in Engineering & Health Sciences, 17-19 December, 2014, Manipal.

Mahesha, G T and Shenoy, Satisha B and Kini, Vijaya M and Bhat, Subrahmanya K and Abhiram, P (2014) Preparation and characterization of alkali treated Grewia serrulata short fiber composites. In: National Conference on Advances in Aerial/Road Vehicle and its applications, 18th and 19th july 2014, MIT, Manipal.

Mahesha, G T and Rao, Pakshit and Shenoy, Satish B and Kini, Vijaya M and Srinivas, G (2014) Review of natural fiber composites. In: International Conference on Environmant and Sustainable Trechnologies (ICEST-2014), 3 t0 5 January 2014, MIT Manipal.

Pai, Rammohan S and Shenoy, Satish B and Rao, Srikanth D and Pai, Raghuvir B (2014) Stability Characteristics of Multiple Axial Groove Journal Bearings Lubricated With Water Based Lubricant. In: International conference on Computational Method and Engineering, Health Science, December 17 - 19, 2014, MIT, Manipal, India.

Pai, Rammohan S and Rao, Srikanth D and Shenoy, Satish B and Pai, Raghuvir B (2014) Static characteristics of 3-axial groove journal bearing lubricated with water based lubricant. In: National conference on Advanced Aerial/Road Vehicle and its applications, 18 - 19, 2014, MIT, Manipal, India..

Pai, Rammohan S and Shenoy, Satish B and Rao, Srikanth D and Pai, Raghuvir B (2014) Stiffness and Damping Coefficients of 3-axial groove water lubricated journal bearings. In: National conference on Advanced Aerial/Road Vehicle and its applications, July 18 - 19, 2014, MIT, Manipal, India..

Reddy, Sree Vaibhav KM and Shivaprasad, U (2014) A study on issues and choices to implement sustainable technologies in urban transportation of india. In: Environment and Sustainable Technologies, 03/01/2014, MIT, Manipal.

Shivaprasad, U and Suresh Kumar, R (2013) Computational Analysis of Hypersonic Vehicle Intake Configuration. In: The International Conference of Engineering Sciences and Management, October 5-6, 2013, Hyderabad, India.

Nayak, Gurudas C and Singh, Balbir and D'souza, Vijeth and D'Souza, Winston Rohan (2013) Integration of GPS and GSM for Human Detection and Rescue in Water-Body, using an Intimation- Device and Robotic-Boat to provide Emergency Services to End-user. In: Proceedings of 4th National Conference on Recent Trends in Communication Computation and Signal Processing (RTCSP-2013).

Nayak, Gurudas C and Singh, Balbir (2013) Role of Telecommunications Network in Universities(Best paper award. In: Conference on Telenet-2013, 27-28 February 2013, Amity university, Uttar Pradesh.

Umananda, K V and George, Libu B and Raviraja, A (2012) Design, fabrication and performance evaluation of a hybrid electric vehicle. In: International Conference on Recent Advances and Challenges in Energy, January 4 –6, 2012, MIT, Manipal.

Shenoy, Satish B and Pai, Rammohan S and Pai, Raghuvir B and Rao, Srikanth D (2012) Effect of turbulence and offset loading on the performance of a single pad externally adjustable fluid film bearing. In: Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition, November 9-15, 2012, Houston, Texas, USA..

Nair, Vishnu G and Thakur, Mayank and George, V I and Dileep, M V (2012) Fuzzy Roll Control System for Unmanned Aerial vehicle. In: Proceedings of IX Control Instrumentation System Conference , 16-17 November 2012, Manipal.

Kumar, Amit and Sarwade, A G and Shivaprasad, U and Tirupati, T (2012) The main aim of this paper is the investigations of aircraft gas turbine engine emissions. In semi-empirical emission correlation methods to predict the sum of nitric oxide and nitrogen dioxide (NOx), carbon monoxide. In: National Seminar on Expanding Expanding Frontiers in Aerospace Technologies- Challenges and Oppurtunities, 24/11/2012, Secunderabad.

Kini , Chandrakant R and Shenoy, Satish B and Sharma, Yagnesh N (2011) A Computational Conjugate Thermal Analysis of HP Stage Turbine Blade Cooling with Innovative Cooling Passage Geometries. In: Proceedings of the World Congress on Engineering, July 6 - 8, 2011, London, U.K..

Padmaraj, N H and Kini, Vijaya M and Pai, Raghuvir B and Shenoy, Satish B and Krishnamoorthy, Agrahara (2010) Effect of Different Treatment Media on the Breaking Strength of Long Areca Nut Fibers. In: IV National Conference on Trends in Mechanical Engineering, TIME'10, 30/12/2010, NIT Warangal.

Pai, Rammohan S and Rao, Srikanth D and Kini, Vijaya M and Shenoy, Satish B and Pai, Raghuvir B (2009) Effect of groove location on the stability of multiple axial groove water lubricated journal bearing-A non linear transient approach. In: International conference on Applied Mechanics and Mechanical Engineering, December 25-27, 2009, Bangkok, Thailand.

Rao, Srikanth D and Pai, Rammohan S and Kini, Vijaya M and Shenoy, Satish B and Pai, Raghuvir B (2009) Effect of groove location on the static characteristics of multiple axial groove water lubricated journal bearing. In: International conference on Applied Mechanics and Mechanical Engineering, December 25-27, 2009, Bangkok, Thailand.

Kumar, Abhijeet and Kumar, Shubham and Kumari, Priyanka and Dey, Pekham and Pai, Rammohan S (2008) Failure investigation of wheel bearing of TATA 1210 bus. In: National conference on AIM Enggineering, Oct. 28-30, 2008, M.I.T., Manipal.

Pai, Rammohan S and Rao, Srikanth D and Pai, Raghuvir B (2008) Non-linear transient analysis of five axial groove water lubricated journal bearing. In: International Conference on Advanced Tribology, ICAT 2004., December 1-3, National University of Singapore, Singapore.

Pai, Rammohan S and Kumar, Rajnish and Rao, Srikanth D and Pai, Raghuvir B (2008) Stability analysis of five axial groove water lubricated journal bearings. In: International Conference on Advanced Tribology, ICAT 2004., December 1-3, National University of Singapore, Singapore.

Pai, Rammohan S and Rao, Srikanth D and Shenoy, Satish B and Pai, Raghuvir B (2008) Static characteristics of 3 –axial groove water lubricated journal bearings. In: National conference on AIM Engineering, Oct. 28-30, 2008, M.I.T., Manipal.

Pai, Rammohan S and Pai, Raghuvir B and Majumdar, B C and Hargreaves, D J (2006) Comparison of static performance characteristics of 3-Axial groove water lubricated journal bearings: Reynolds and JFO models. In: AUSTRIB, Dec 3-6, 2006, Brisbane, Australia.

Pai, Rammohan S and Pai, Raghuvir B and Majumdar, B C and Hargreaves, D J (2003) Effect of groove angles on the static characteristics of multiple axial groove water lubricated bearings. In: National Conference of ISME, Dec. 30-31, 2003, IIT, Roorkee.

This list was generated on Wed Dec 13 22:22:04 2017 UTC.