MU Digital Repository
Logo

Items where Subject is "Engineering > MIT Manipal > Mechanical and Manufacturing"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | Creators
Number of items at this level: 664.

Article

Shettigar, Arun Kumar and Prabhu, Subramanya R B and Malghan, Rashmi L and Rao, Srikantha and Herbert, Mervin A (2017) Application of Neural Network for the Prediction of Tensile Properties of Friction Stir Welded Composites. Materials Science Forum, 880 (1). pp. 128-131. ISSN 1662-9752

Pai, Raghuvir B and Khader, Abdul S M and Ayachit, Anurag and Ahmad, K A and Zubair, Md and Rao, V R K and Kamath, Ganesh S (2017) Fluid-Structure Interaction Study of Stenotic Flow in Subject Specific Carotid Bifurcation—A Case Study. Journal of Medical Imaging and Health Informatics, 6 (6). pp. 1494-1499. ISSN 2156-7026

Prabhu, Subramanya R B and Shettigar, Arun Kumar and Rao, Karthik and Rao, Srikantha and Herbert, Mervin A (2017) Influence of Welding Process Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Aluminium Matrix Composite. Materials Science Forum, 880 (1). pp. 50-53. ISSN 1662-9752

Gowri Shankar, M C and Sharma, S S and Kini, Achutha U and Hiremath, Pavan and Gurumurthy, B M (2017) Microstructure and fracture behaviour of two stage stir cast Al6061-SiC composites. Journal of Materials and Environmental Science, 8 (1). pp. 257-263. ISSN 2028-2508

Shenoy, Srinivas H and Nayak, Suhas Y and Vikas, Ramakrishna S and Kini, Vijaya M and Padmaraj, N H (2016) Investigation of Tensile Strength for Areca Frond/Corn Starch Composites. Indian Journal of Science and Technology, 9 (35). ISSN 0974-6846

Pai, Anand and Padmaraj, N H and Chethan, K N and Vibhor, Saini (2016) Mechanical response of fine laterite-modified polyester matrix composites. Materials Research Innovations. pp. 1-7. ISSN 1433-075X

Vinoth, R and Adhikari, Raviraj and Kumar, D (2016) Computational Simulation of Blood Flow in Normal and Diseased Artery: A Review. Indian Journal of Science and Technology, 9 (15). pp. 1-9. ISSN 0974-6846

Gowri Shankar, M C and Sharma, S S and Kini, Achutha U and Jayashree, P K and Gurumurthy, B M (2016) Study of Wear Behavior and Mechanical Mixed Layer on Artificial Aged Al6061 Composite Reinforced with B4C Particles. Indian Journal of Science and Technology, 9 (12). ISSN 0974-6846

Kini, Chandrakant R and Yalamarty, Sai Sharan and Mendonca, Royston Marlon and Sharma, Yagnesh N and Shenoy, Satish B (2016) CHT Analysis of Trailing Edge Region Cooling In HP Stage Turbine Blade. Indian Journal of Science and Technology, 9 (6). pp. 1-6. ISSN 0974-6846

Kini, Achutha U and Sharma, S S and Jagannath, K and Prabhu, P R and Bhat, Chandrashekhar and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2016) Comparative Study of EPHO and CBTC as Corrosion Inhibitors for 15 vol. % 6061 al Alloy/SiCp Composite in 1 M Hydrochloric Acid Medium. International journal of industrial and Mechanical Engineering Sciences, 2 (1). pp. 5-9.

Prabhu, P R and Sharma, S S and Jagannath, K and Gowri Shankar, M C and Kini, Achutha U and Kulkarni, S M (2016) Design of Experiment Based Approach to Optimize Turn-Assisted Deep Cold Rolling Process Parameters. International Journal of Industrial and Mechanical Engineering Sciences, 2 (1). pp. 17-23.

Bhat, Chandrashekhar and Sharma, S S and Jagannath, K and Kini, Achutha U and Pandey, Sunil Kumar and Saravana, Venkatesh and Kumar, Praveen K S (2016) Waste Heat Recovery System for a Heavy Duty Six Cylinder Engine. International Journal of Industril and Mechanical Engineering Sciences, 2 (1). pp. 10-16.

Shahabaz, M and Kumar, Rakesh and Shetty, Nagaraj and Sharma, S S (2016) Analysis of Delamination in Carbon Fibre Reinforced Polymer Composite using Finite Element Method. International Journal of Innovative Research in Science, Engineering and Technology, 5 (2). pp. 1333-1340. ISSN 2319-8753

Arunachala, U C and Bhatt, Siddhartha M and Sreepathi, L K (2016) Analytical and Experimental Investigation to Determine the Variation of Hottel–Whillier–Bliss Constants for a Scaled Forced Circulation Flat-Plate Solar Water Heater. Journal of Solar Energy Engineering, 137 (5). pp. 1-8. ISSN 0199-6231

Malghan, Rashmi L and Rao, Karthik M C and Shettigar, Arun Kumar and Rao, Shashikantha and D’Souza, R J (2016) Application of particle swarm optimization and response surface methodology for machining parameters optimization of aluminium matrix composites in milling operation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 38 (8). pp. 37-40. ISSN 1678-5878

Mehta, Darshan Bhavesh and Sharma, S S and Gurumurthy, B M and Bairy, Kishan S and Dsouza, Eril Joy and Mendonca, Antony Prajwal (2016) Characteristic Study and Comparison of Different Hardening Methods on Low-Alloy Medium-Carbon Spring Steel. International Journal of Applied Engineering Research, 11 (2). pp. 1542-1547. ISSN 0973-4562

Manikanta, M and Sharma, S S and Rao, Sathish U (2016) Characteristic Study and Enhancement of Mechanical Properties of Al2024 Gray Cast Iron Powder Reinforced MMC by Heat Treatment. International Journal of Advance Research, Ideas and Innovations in Technology., 2 (6). pp. 1-6. ISSN 2454-132X

Pai, Srinath and Sharief, Abdul and Shivakumar, . (2016) Combined Impact of High Injection Pressure and Injection Timing on the Performance and Combustion of Common Rail Direct Injection (CRDI) Engine Fueled with a Simarouba Biodiesel Blend. Indian Journal of Science and Technology, 9 (45). ISSN 0974-6846

Joshi, Mukund and Shetty, Nagaraj and Bharath, N L S and Surapaneni, Chanakya Varma (2016) Comparative Evaluation of Additive Manufacturing Processes. Indian Journal of Advances in Chemical Science, S1 (1). pp. 22-26. ISSN 2320-0898

Kumar, H S and Pai, Srinivasa and Sriram, N S and Vijay, G S and Patil, Vijay M (2016) Comparison of denoising schemes and dimensionality reduction techniques for fault diagnosis of rolling element bearing using wavelet transform. International Journal of Manufacturing Research, 11 (3). pp. 238-258. ISSN 1750-0591

Shanmugapriya, S and Migadalska, Joanna (2016) Cooling degree day analysis as a climate impact Indicator for different locations of poland and india. International Journal of Advances in Science Engineering and Technology, 3 (4). pp. 42-50. ISSN 2321-9009

Anarghya, A and Yatheesha, R B and Gurumurthy, B M and Nitish, R and Ranjith, B S (2016) Drill-Ability Studies of Laser Drilled Micro Holes on CFRP Composites. New Developments in Biology, Biomedical & Chemical Engineering and Materials Science, 2. pp. 11-17. ISSN 978-1-6180

Jagannath, K and Sharma, S S and Prabhu, P R and Gowri Shankar, M C and Harisha, S R (2016) Effect of Artificial Aging on Fracture Behavior of Al6061-Silica (SiO2) Composites. Materials Science Forum, 880 (1). pp. 59-62. ISSN 1662-9752

Ghosh, Madhurima and Santhosh, R and Das, S K and Das, G and Mahato, B and Jagannath, K and Kumar, S and Singh, P K (2016) Effect of Structural Heterogeneity on In Situ Deformation of Dissimilar Weld Between Ferritic and Austenitic Steel. Metallurgical and Materials Transactions, 46 (8). pp. 3555-3568. ISSN 1073-5623

Santhosh, R and Singh, P K and Das, G and Jagannath, K and Das, S K and Kumar, S and Ghosh, Madhurima (2016) Effect of different parameters on uncertainty during evaluation of strength of dissimilar metal weld. Materialwissenschaft und Werkstofftechnik, 47 (9). pp. 845-851. ISSN 0933-5137

Deepak, D and Eqbal, Basit and Sangolagi, Siddaram and Anjaiah, D (2016) Effect of process parameters on the surface roughness generated on graphite laced GFRP composite by AWJ machining. International Journal of Abrasive Technology, 7 (4). pp. 294-306. ISSN 1752-2641

Sharma, S S and Anudeep, Mallarapu and Upparapalli, Hiteshwar and Rai, Chirag (2016) Effects of Thermal Treatment on Mechanical Properties and Grain size of En8 Steel. Journal of Mechanical Engineering and Biomechanics, 1 (2). pp. 64-68. ISSN 2456-219X

Shetty, Divakara S and Shetty, Nagaraj (2016) Electrochemical corrosion of low carbon steel in a hydrochloric acid medium. International Journal of Technology. pp. 531-541. ISSN 2086-9614

Pai, Srinath and Krishnaprasad, . and Sharief, Abdul and Shivakumar, . (2016) Emission Analysis of a Diesel Engine Using ANN – A Review. International Journal of Engineering Trends and Technology, 40. pp. 123-129. ISSN 2231-5381

Barboza, A B V and Shetty, Raviraj and Shetty, Priyanka and Shetty, Jayaram (2016) Emperical study on customer satisfaction in public sector and private sector banks in India. Asian journal of Management Sciences and Education, 5 (1). pp. 18-26. ISSN 2186-845X

Shivaprakash, Y M and Jayashree, P K and Gowri Shankar, M C and Gurumurthy, B M and Hiremath, Anupama and Prasad, Sreenivasa K V (2016) Experimental Studies on Heat Treated AA6061+GCI Composite. Indian Journal of Science and Technology. ISSN 0974-6846

Khader, Abdul S M and Rajeev, . and Ayachit, Anurag and Pai, Raghuvir B and Muraleedharan, C V and Zubair, Md and Rao, V R K (2016) Experimental and Numerical Study of Stenotic Flows. Journal of Medical Imaging and Health Informatics, 6. pp. 1500-1506. ISSN 2156-7026

Arunachala, U C and Ajay, R K and Sandeep, H M (2016) Experimental study with analytical validation of thermo-hydraulic performance of plate heat exchanger with different chevron angles. International Journal of Mining, Metallurgy & Mechanical Engineering, 4 (1). pp. 47-54. ISSN 2320–4060

Mohan, N S and Shettar, Manjunath and Bhat, Ritesh R (2016) Fabrication and Investigation of Epoxy resin based Glass Fibre-Coconut Fibre Hybrid Composite Material. International Journal of Mining, Metallurgy & Mechanical Engineering, 4 (1). pp. 37-40. ISSN 2320–4060

Prabhu, Sandesh M and Kini, Achutha U and Sharma, S S and Gurumurthy, B M (2016) Heat treatment and mechanical characterisation Of dual phase (ferrite-martensite) medium carbon Low alloy steels. International Journal For Technological Research In Engineering, 3 (8). pp. 1776-1779. ISSN 2347 - 4718

Harisha, S R and Sharma, S S and Kini, Achutha U (2016) Influence of Spheroidizing Heat Treatment on Mechanical Properties of EN47 Steel. Materials Science Forum, 880. pp. 136-139. ISSN 1662-9752

Gowri Shankar, M C and Sharma, S S and Kini, Achutha U and Shivaprakash, Y M and Gurumurthy, B M (2016) Influence of artificial aging on the stir cast al6061-sic metal matrix composites under different aging conditions. International Journal of Technology, 7 (6). pp. 1000-1008. ISSN 2086-9614

Anarghya, M and Nitish, S R and Yatheesha, R B and Gurumurthy, B M and Ranjith, B S (2016) Investigation of CO2 Laser Drilled Micro Holes for Heat Affected Zone and Structural Integrity in CFRP Composites. International Journal of Materials, 3. pp. 33-43. ISSN 2313-0555

Pavan, Hiremath and Shettar, Manjunath and Gowrishankar, M C (2016) Investigation on Mechanical and Physical Properties of GFRP-Egg Shell Powder Hybrid Composites. Indian Journal of Science and Technology, 9 (32). ISSN 0974-6846

Joshi, Mukund and Shetty, Nagaraj and Shetty, Divakara S and Bharath, N L S and Varma, Chanakya S (2016) Mechanical Characterization of Additive Manufacturing Processes. Indian Journal of Science and Technology, 9 (36). ISSN 0974-5645

Sharma, S S and Jagannath, K and Prabhu, P R and Gowri Shankar, M C and Harisha, S R and Kini, Achutha U (2016) Metallography & Bulk Hardness of Artificially Aged Al6061-B4C-SiC Stir Cast Hybrid Composites. Materials Science Forum, 880 (1). pp. 140-143. ISSN 1662-9752

Shetty, Akhil Appu and George, V I and Nayak, Gurudas C and Shetty, Raviraj (2016) Normalized Cross Correlation for Stereo Matching Under Varying Illumination. International Journal of Control Theory and Applications, 9. pp. 39-42. ISSN 09745572

Kini, Chandrakant R and Kamat, Harishkumar and Shenoy, Satish B (2016) Numerical Simulation of Internal Cooling Effect of Gas Turbine Blades using Twisted Tape Inserts. Indian Journal of Science and Technology, 9 (31). ISSN 0974-6846

Deepak, D and Rajendra, Beedu (2016) Optimization of Machining Parameters for Turning of Al6061 using Robust Design Principle to minimize the surface roughness. Procedia Technology, 24 (1). pp. 372-378. ISSN 2212-0173

Rajendra, Beedu and Deepak, D (2016) Optimization of Process Parameters for Increasing Material Removal Rate for Turning Al6061 Using S/N ratio. Procedia Technology, 24. pp. 399-406. ISSN 2212-0173

Mahesha, G T and Satish Rao, S B and Vijaya, K M and Bhat, K S (2016) Preparation of Unidirectional Grewia Serrulata Fiber-Reinforced Polyester Composites and Evaluation of Tensile and Flexural Properties. Journal of Natural Fibers, 13 (5). pp. 547-554. ISSN 1544-0478

Kumar, Nithesh and Khader, A M A and Pai, Raghuvir B and Kyriacou, P A (2016) A Review of Application of CFD in Stenosed Arteries. International Journal of Fluids and Heat Transfer, 1 (1).

Nair, Moorthy M and Kamath, Shambhavi M and Shetty, Nagaraj (2016) A Review on Dominant Factors that Conclude Performance of Coir Fiber Reinforced Polymer Composites. International Journal of Advanced Research, 4 (6). pp. 354-358. ISSN 2320-5407

Gurumurthy, B M and Hiremath, Anupama and Shivaprakash, Y M and Gowri Shankar, M C and Jayashree, P K (2016) Self- Healing Materials, A New Era In Material Technology: A Review. International Journal of Applied Engineering Research, 11 (2). pp. 1934-1399. ISSN 0973-4562

Shetty, Nagaraj and Herbert, Mervin A and Shetty, Raviraj and Shetty, Divakara S and Vijay, G S (2016) Soft computing techniques during drilling of bi-directional carbon fiber reinforced composite. Applied Soft Computing, 41 (41). pp. 466-478. ISSN 1568-4946

Mallya, Ravindra and Shenoy, Satish B and Pai, Raghuvir B (2016) Static characteristics of misaligned multiple axial groove water-lubricated bearing in the turbulent regime. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. pp. 572-578. ISSN 1350-6501

Deepak, D and Muhammad, Ameen and Jagan, Rohith and Kumar, Kashish (2016) Studies on Development of Soft Robotic Bending Actuator using Natural Rubber. Indian Journal of Science and Technology, 9 (42). ISSN 0974-6846

Gurumurthy, B M and Sharma, S S and Gowri Shankar, M C and Sowmith, . and Abhishek, . and Abhishek, Devar (2016) Study of Mechanical Properties of Dual Phase EN19 Steel (AISI4140). Indian Journal of Science and Technology, 9 (37). pp. 37-42. ISSN 0974-6846

Nair, Moorthy M and Kamath, Shambhavi M and Shetty, Nagaraj (2016) Study on Distilled/Sea Water Absorption Behaviour Influenced by Non-Uniform Long Piled up Coir Fiber Composites. International Journal of Innovative Research in Science, Engineering and Technology, 5 (9). pp. 15-21. ISSN 2319-8753

Gurumurthy, B M and Sharma, S S and Gowri Shankar, M C and Walia, Romit and Agarwal, Tanishq (2016) Study on Dual-Phase Structure of AISI4140 Steel. Indian Journal of Science and Technology, 9 (33). ISSN 0974-6846

Nair, Moorthy M and Kamath, Shambhavi M and Shetty, Nagaraj (2016) Study on Tensile and Hardness behavior of Sawdust Impregnated on Short Coir Fiber Reinforced Epoxy Composite. Indian Journal of Advances in Chemical Science, s1 (1). pp. 118-121. ISSN 2320-0898

Prabhu, Raghavendra and Sharma, S S and Jagannath, K and Kumar, Krishna and Kulkarni, S M (2016) Surface Improvement of Shafts by Turn-Assisted Deep Cold Rolling Process. MATEC Web of Conferences, 77 (10006). pp. 1-4. ISSN 2261-236x

Kini, Chandrakant R and Shenoy, Satish B and Sharma, Yagnesh N (2016) Thermo-Structural Investigation of Gas Turbine Blade Provided with Helicoidal Passages. Indian Journal of Science and Technology, 9 (20). ISSN 0974-6846

Santhosh, R and Das, S K and Das, G and Jagannath, K and Kumar, S and Singh, P K and Ghosh, Madhurima (2016) Three-Dimensional Thermomechanical Simulation and Experimental Validation on Failure of Dissimilar Material Welds. Metallurgical and Materials Transactions, 47A (5). pp. 1-11. ISSN 1073-5623

Bakshi, Neerja and Shiva Prasad, H C and Potti Srinivasa, Rao and Gopalkrishna, B (2016) Transformation engine of economic growth with make-in-india campaign. Journal of Economic policy and Research, 11 (01). pp. 4-14.

Revankar, Goutam D and Shetty, Raviraj and Rao, Shrikantha Srinivas and Gaitonde, Vinayak N (2016) Wear resistance enhancement of titanium alloy(Ti–6Al–4V) by ball burnishing process. Journal of Materials Research and Technology, 1 (1). pp. 1-20. ISSN 2238-7854

Poojary, Akshaya T and Sharma, Rahul S and Patel, Meet H and Sheth, Dharmik U and Kini, Chandrakant R and Nayak, Rajesh (2015) Design and Modelling of Hemispherical and Flat Dish End Pressure Vessel. Indian Journal of Science and Technology, 8 (33). pp. 1-7. ISSN 0974-6846

Paul, Rajarshi and Shreesha, C and Prabhu, Srikanth and Shinde, Sumit (2015) Design of Intelligent Controller for Temperature Process on FPGA. International Journal of Control Theory and Applications, 8 (3). pp. 1113-1120. ISSN 09745572

Rao, Sathish U and Rodrigues, Lewlyn L R (2015) Controlling Process Factors to Optimize Surface Quality in Drilling of GFRP Composites by Integrating DoE, ANOVA and RSM Techniques. Indian Journal of Science and Technology, 8 (29). pp. 1-9. ISSN 0974-6846

Prabhu, Subramanya R B and Shettigar, Arun Kumar and Rao, Karthik M C and Nigalye, Akshay and Herbert, Mervin A and Rao, Srikanth S (2015) Effect of process parameters on tensile strength of riction stir Welded al-cu-mg-si-sicp composite. International Journal of Researchers in Biosciences, Agriculture and Technology, 2 (7). pp. 5-10. ISSN 2347 – 517X

Kumar, Nithesh and Adhikari, Raviraj and Anjaiah, D and Marimuthu, Rajamani (2015) Finite Element Analysis Using Herrmann Formulation for Viscoelastic Materials. International Journal of Civil and Structural Engineering, 2 (2). pp. 249-253. ISSN 2372-3971

Viswanathan, Arjun and Chiniwar, Dundesh and Christopher, J and Rao, Pallanti and Naik, Nithesh (2015) An Intelligent Solid State Switch for Starter Motor as an Alternate Solution to Solenoid with Contact Bouncing Issues. International Journal of Current Engineering and Technology, 5 (5). pp. 3144-3149. ISSN 2277 - 4106

Madhwesh, N and Manjunath, M S and Karanth, Vasudeva K (2015) Influence of number of impeller and diffuser blades on the pressure recovery of centrifugal fan. International Journal of Research in Engineering and Technology (IJRET), 4 (9). pp. 246-250. ISSN 2277 – 4378

Deepak, D and Akash, Valavala and Anjaiah, D (2015) Studies on Jet Penetration and Kerf Width at Various Operating Pressure in Machining of D2 Heat Treated Steel using Abrasive Water Jet. International Journal of Research in Engineering and Technology, 4 (9). pp. 344-347. ISSN 2319-1163

Deepak, D and Rajendra, Beedu (2015) Studies on material removal rate of al6061 while turning with coolant and without coolant using taguchi method. International Journal of Research in Engineering and Technology (IJRET), 4 (9). pp. 75-78. ISSN 2277 – 4378

Rajendra, Beedu (2015) Design, development and performance evaluation of solar power assisted tricycle. International Journal of Research in Engineering and Technology (IJRET), 4 (7). pp. 513-517. ISSN 2277 – 4378

Mankani, Mithesh and Sharma, S S (2015) Heat Treatment of Mill-hardened Beryllium Copper for Space Applications. Universal Journal of Mechanical Engineering, 3 (4). pp. 147-150.

Vijay, G S and Pai, Srinivasa P and Sriram, N S and Rao, Raj B K N (2015) Radial basis function neural network for effective condition monitoring of rolling element bearing. International journal of COMADEM, UK, 18 (3). pp. 21-31. ISSN 1363-7681

Nayak, Suhas Y and Shenoy, Srinivas H and Rao, Sathish U and Narang, Karan and Pant, Kirti Vardhan (2015) Mechanical Properties of Multi Layer Plain Weave and 3-D Glass Fabric Epoxy Composites. International Journal of Composite Materials, 5 (2). pp. 30-36.

Ghosh, MK and Santhosh, R and Das, S K and Mahato, B and Jagannath, K and Kumar, S and Singh, P K (2015) Effect of Structural Heterogeneity on In Situ Deformation of Dissimilar Weld Between Ferritic and Austenitic Steel. Metallurgical and Materials Transactions, 46A (6). pp. 2323-2792. ISSN 1073-5623

Shivakumar, . and Gaggad, Ashutosh (2015) Heat Transfer Enhancement in a Double Pipe Heat Exchanger with a Twisted Tape as a Passive Device- A Numerical Analysis. Elixir International Journal, 83. pp. 33095-33099.

Shettar, Manjunath and Hiremath, Pavan and Nikhil, R and Chauhan, Vithal Rao (2015) KAIZEN – A case study. International Journal of Engineering Research and Applications, 5 (5). pp. 101-103. ISSN 2248-9622

Bhat, Ritesh R (2015) Industrial Effluents: A Major Threat to India. International Journal of Research (IJR), 2 (3). pp. 115-119. ISSN 2348-6848

Das, Amla and Shivakumar, . (2015) Modelling and Analysis of Lattice Towers for Wind Turbines. International Journal of Science and Research, 4 (4). pp. 999-1003. ISSN 2319-7064

Yalamarty, Sai Sharan and Mendonca, Royston Marlon and Kini , Chandrakant R (2015) Thermal Performance of Spiral Heat Sinks for LED Lighting Modules. International Journal of Current Engineering and Technology, 5 (2). pp. 1137-1141. ISSN 2277 - 4106

Shivaprakash, Y M and Gurumurthy, B M and Gowrishankar, M C and Sharma , S S and Kini, Achutha U (2015) Comparative studies on mechanical properties of aisi 4340 high-strength alloy steel under time- quenched and austempered conditions. International Journal of Research in Engineering and Technology (IJRET), 4 (2). pp. 530-535. ISSN 2277 – 4378

Shettar, Manjunath and Chauhan, Vithal Rao and Hiremath, Pavan (2015) An Experimental Study of Mechanical Properties of GFRP Hybrid Composite with Different Fillers. International Journal of Research, 2 (3). ISSN 2348-6848

Mendonca, Royston Marlon and Yalamarty, Sai Sharan and Kini, Chandrakant R (2015) Numerical analysis of heat sinks for led lighting modules. International Journal of Research in Engineering and Technology (IJRET), 4 (3). pp. 142-150. ISSN 2277 – 4378

Karanth, Vasudeva K and Madhwesh, N and Shivakumar, . and Manjunath, M S (2015) Numerical and experimental study of a solar water heater for enhancement in thermal performance. International Journal of Research in Engineering and Technology (IJRET), 4 (3). pp. 548-553. ISSN 2277 – 4378

George, Varghese and Mohanan, p and Naik, Nithesh (2015) The Effect of Cyclo-Alkane Additives in Waste Cooking Oil B20 Fuel on a Single Cylinder DI Diesel Engine. International Journal of Materials, Mechanics and Manufacturing, 3 (1). pp. 44-48.

Shetty, Nagaraj and Herbert, Mervin A and Shetty, Divakara S and Vijay, G S and Shetty, Raviraj and Shivamurthy, B (2015) Experimental Investigation in Drilling of Carbon Fiber Reinforced Polymer Composite using HSS and Solid Carbide Drills. International Journal of Current Engineering and Technology, 5 (1). pp. 313-320. ISSN 2277 - 4106

Shettar, Manjunath and Hiremath, Pavan and Chauhan, Vithal Rao (2015) Influence of Feathers on Mechanical Properties of Glass/Unsaturated Polyester Hybrid Composite. International Journal of Engineering and Management Research, 5 (1). pp. 92-95. ISSN 2250-0758

Shettar, Manjunath and Chauhan, Vithal Rao (2015) Investigation on mechanical properties of e- glass, epoxy resin with Asbestos filled /hybrid composites. Global Journal of Engineering Science and Research Management, 2 (2). pp. 31-35. ISSN 2349-4506

Kini , Chandrakant R and Shivaprakash, Y M and Gowrishankar, M C and Sharma , S S and Sreenivasa Prasad, K V (2015) Investigation on the behaviour of alfa composite in pre and post heat treated conditions. International Journal of Research in Engineering and Technology, 04 (02). pp. 28-37. ISSN 2319-1163

Sharma , S S and Gowri Shankar , M C and Kini, Achutha U and Shivaprakash, Y M and Prabhu, P R (2015) Microstructure and sliding wear behaviour of stircast Ti-gr and Ti –Fe metal matrix composites. International Journal of Research in Engineering and Technology, 04 (02). pp. 222-227. ISSN 2319-1163

Prabhu, Aruna and Kamath, Giridhar B (2015) Effect of Human Factors on Technical Institute Performance. International Journal of Emerging Technology and Advanced Engineering, 5 (1). pp. 20-25. ISSN 2250-2459

Sharma, S S and Jagannath, K and Bhat, Chandrashekhar and Kini, Achutha U and Prabhu, P R and Gowri Shankar, M C and Jayashree, P K (2015) Age Hardening and Cold Deformation Assisted Aging Treatment on the Characteristics of Quartz Powder Reinforced Stir-Cast Aluminium-Zinc Alloy Metal Matrix Composites. International Journal of Industrial and Mechanical Engineering Sciences, 1 (1). 01-05.

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K and Kini, Achutha U (2015) Analysis of Surface Hardness, Surface Roughness, and Near Surface Microstructure of AISI 4140 Steel Worked with Turn-Assisted Deep Cold Rolling Process. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9 (6). pp. 999-1005.

Shenoy, Srinivas H and Nayak, Suhas Y and Gupta, Yash Vardhana and Chowgule, Revati and Bharadwaj, Kapil B (2015) Analysis of a forming press for composite panel fabrication. International journal of core engineering & management, 1 (12). pp. 185-192. ISSN 2348 -9510

Kini, Achutha U and Sharma , S S and Jagannath, K and Prabhu, P R and Gowrishankar, M C (2015) Characterization Study of Aluminium 6061 Hybrid Composite. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 9 (6). pp. 578-582.

Shenoy, Srinivas H and Nayak, Suhas Y and Narang, Karan and Pant, Kirti Vardhan (2015) Chopped Strand/Plain Weave E-Glass as Reinforcement in Vacuum Bagged Epoxy Composites. Journal of Materials.

Vinoth, R and Kumar, D and Adhikari, Raviraj and Devaprasad, Dedeepiya and Kaliyamoorthy, Dhamodharan (2015) Computational investigation of blood flow in fusiform models of aortic aneurysms: a steady state analysis. International Journal of Biomedical Engineering and Technology, 19 (1). pp. 70-91.

Vishwamurthy, S R and Ajeesh, G and Hiremath, Pavan and Rai, Ashwin and Venkatesh, S and Gaddikeri, Kotresh M (2015) Damage tolerance of stiffened skin composite panels. Journal of Aerospace Science & Technologies, 67 (2B). pp. 291-298.

Arunkumar, H S and Mutalik, Ravi Kumar S and Krishnamurthy, . and Ganesha, A (2015) Design and Experimental Investigation of Turbocharg-er on Performances of Diesel Engine. International Journl of Engoneering, Education and Technology, 3 (2). ISSN 2320-883X

Kumar, Praveen P K and Karanth, Vasudeva K and Christopher, William I (2015) Design of Horizontal-Axis Wind Turbine (HAWT) Blade for Indian Low Wind Speed Regimes. International Journal of Applied Engineering Research, 10 (42). pp. 30829-30834. ISSN 0973-4562

Gurumurthy, B M and Harisha, S R and Prabhu, Subramanya R B and Gangadharan, K V (2015) Design of Virtual Instrumentation approach for A Multi-Purpose online Mechanical Vibration Experiment Using Labview. Journal of Mechanical and Civil Engineering (IOSR-JMCE), 68 (71). pp. 68-71. ISSN 2278-1684

Gowri Shankar, M C and Shravan, * and Rakesh, * and Rahul, * and Kini, Achutha U and Sharma, S S (2015) Effect of Artificial Aging on Strength and Wear behaviour of Solutionized Aluminium 6061 Alloy. International Journal of Industrial and Mechanical Engineering Sciences, 1 (1). pp. 10-15.

Shenoy, Srinivas H and Nayak, Suhas Y and Kini, Vijaya M and Chowgule, Revati and Jain, Pranay (2015) Effect of Curing on the Tensile and Flexural Performance of Fully Biodegradable Corn Starch/Areca Frond Composites. Journal of Composites.

Avase, Syed Aatif and Srivastava, Shivank and Kumar, Vishal and Ashok, Harsha V and George, Varghese (2015) Effect of Pyrogallol as an Antioxidant on the Performance and Emission Characteristics of Biodiesel derived from Waste Cooking Oil. Procedia Earth and Planetary Science, 11. pp. 437-444.

Shettar, Manjunath and Hiremath, Pavan (2015) Effect of Seawater on Mechanical Properties of GFRP with Cement as Filler Material for Fishing Boat Application. International Journal of Applied Engineering Research, 10 (19). pp. 40027-40030. ISSN 0973-4562

Gowri Shankar, M C and Kini, Achutha U and Sharma, S S and Prabhu, P R (2015) Effect of SiC particulate reinforcement on the precipitation hardening behavior of two step stir cast Al 6061 alloy. International Journal of Applied Engineering Research, 10 (78). pp. 19-24. ISSN 0973-4562

Pai, Anand and Sharma, S S and D'silva, Raynor Errol and Nikhil, R G (2015) Effect of graphite and granite dust particulates as micro-fillers on tribological performance of Al 6061-T6 hybrid composites. Tribology International, 92. pp. 462-471. ISSN 0301-679X

Shettigar, Arun Kumar and Prabhu, Subramanya R B and Malghan, Rashmi L and Herbert, Mervin A and Rao, Shrikantha S (2015) Effect of welding parameters on microstructure and mechanical Properties of friction stir welded metal matrix composite. International journal of researches in biosciences, agriculture and technology, 2 (7). pp. 41-45. ISSN 2347 – 517X

Sharma , S S and Prabhu, P R and Jagannath, K and Kini, Achutha U and Gowri Shankar , M C (2015) Enhancement of Hardness Related Properties of Grey Cast Iron Powder Reinforced AA7075 Metal Matrix Composites through T6 and T8 Heat Treatments. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 9 (6). pp. 675-681.

Chauhan, Vithal Rao and Dinesh, K R and Hiremath, Pavan and Shettar, Manjunath and Veeresh, K and Algur, Veerabhadrappa (2015) Fabrication and Experimental Study on Optimization of Process Parameters for Drilling of GFRP with Iron Ore as Filler Material using Taguchi And ANOVA. International Journal of Applied Engineering Research, 10 (22). pp. 43195-43198. ISSN 0973-4562

Hiremath, Anupama and Hemanth, Joel (2015) Fabrication and Impact of chills on the Strength of Chilled Aluminum alloy-Borosilicate glass Particulate Composite. International Journal of Applied Engineering Research, 10 (20). pp. 41685-41688. ISSN 0973-4562

Hiremath, Anupama and Hemanth, Joel (2015) Fabrication and Impact of chills on the Strength of Chilled Aluminum alloy-Borosilicate glass Particulate Composite. International Journal of Applied Engineering Research, 10 (20). pp. 41685-41688. ISSN 09734562

Shenoy, Srinivas H and Nayak, Suhas Y and Vikas, Ramakrishna S and Shenoy, Vishal P and Vernekar, Navaneet Krishna (2015) Flexural Strength Analysis of Areca Frond Reinforced Starch Based Composites by Taguchi Method. American Journal of Materials Science, 5 (3). pp. 203-208.

Nayak, Rajesh and Shetty, Raviraj (2015) Impact of Process Parameters on Surface Roughness in Elastomer Machining. International Journal of Applied Engineering Research, 10 (78). pp. 13-17. ISSN 0973-4562

Kamath, Giridhar B and Prabhu, Aruna (2015) Influence of Defect Rate Analysis on Production Planning: A System Dynamics Perspective. Discovery - The International Daily journal, 27 (98). pp. 48-53. ISSN 2278 – 5469

Gowri Shankar, M C and Kini, Achutha U and Sharma, S S and Prabhu, P R (2015) Influence of aging temperature and aging time on the mechanical property and microstructure during precipitation hardening of Al 6061 alloy. International Journal of Applied Engineering Research, 10 (78). pp. 25-31. ISSN 0973-4562

Deepak , D and Shivamurthy, B and Anjaiah, D and Sharma, Yagnesh N (2015) An Investigation of Abrasive Water Jet Machining on Graphite/Glass/Epoxy Composite. International Journal of Manufacturing Engineering, 2015 (627218). pp. 1-11. ISSN 1433-3015

Jagannath, K and Kotian, Akhilesh and Sharma , S S and Kini, Achutha U and Prabhu, P R (2015) Investigation of Bubble Growth during Nucleate Boiling Using CFD. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9 (6). pp. 988-992.

Deepak , D and Rajendra, Beedu (2015) Investigations on the surface roughness produced in turning of al6061 (as-cast) by taguchi method. International Journal of Research in Engineering and Technology (IJRET), 4 (8). pp. 295-298. ISSN 2277 – 4378

Gowri Shankar , M C and Jayshree, BS and Shivaprakash, Y M and Gurumurthy, B M and Shettar, Manjunath and Sharma , S S (2015) Machinability study on turning of ti-6al-4v alloy under high Pressure cooling using neat oil & water soluble oil. Global Journal of Engineering Science and Research Management, 2 (6). pp. 169-181. ISSN 2349-4506

Ghosh, Devpriyo and Nangia, Sarthak and Chakravarty, Sourav and Maben, Sharwin and Sharma , S S (2015) Mechanical Characteristic Behaviour of Medium Carbon Low Nickel Chromium Steel to General Conventional Heat Treatments. Universal Journal of Materials Science, 3 (3). pp. 49-54.

Shetty, Nagaraj and Shetty, Divakara S and Vijay, G S and Shetty, Raviraj (2015) Mechanical Characterization and Evaluation of Delamination of Polymer Composite Laminate. International Journal of Applied Engineering Research, 10 (15). pp. 35757-35769. ISSN 0973-4562

Wagh, Akshatha and Raviprakash, Y and Manohar, R and Kamath, Sudha D (2015) Mechanical Properties of Sm3+ Doped Zinc Fluoroborate Glass1. Glass Physics and Chemistry, 41 (3). pp. 290-295. ISSN 1087-6596

Rao, Sathish U and Rodrigues, Lewlyn L R (2015) Minimising flank tool wear in drilling of polymer composites using Statistical techniques. Elixir International Journal: Mechanical Engineering , 79. pp. 30253-30259. ISSN 2229-712x

Poojary, Akshaya T and Jagannath, Suprith and Nayak, Rajesh and Kini, Chandrakant R (2015) Modelling and Equivalent Stress Analysis of Flat Dish End Pressure Vessel. International Journal of Current Engineering and Technology, 5 (5). pp. 3110-3114. ISSN 2277 - 4106

Naik, Nithesh and Ashutosh, . and Mayank, . and Utkarsh, . and Rozek, Andre (2015) Numerical Investigation of Heat Transfer Characteristics of Different Rib Shapes in a Gas Turbine Blade. International Journal of Applied Engineering Research, 10 (78). pp. 244-248. ISSN 0973-4562

Avinash, E and Karanth, Vasudeva K and Christopher, William I (2015) Numerical Simulation and Development of Aerodynamic Model for Darrieus Rotor Vertical Axis Wind Turbine. International Journal of Applied Engineering Research, 10 (42). pp. 30857-30863. ISSN 0973-4562

Karanth, Vasudeva K and Manjunath, M S and Shivakumar, . and Sharma, Yagnesh N (2015) Numerical Study of a Self Priming Regenerative Pump for Improved Performance using Geometric Modifications. International Journal of Current Engineering and Technology, 5 (1). pp. 105-109. ISSN 2277 - 4106

Shivakumar, . and Karanth, Vasudeva K and Murthy, Krishna (2015) Numerical study of heat transfer in a finned double pipe heat exchanger. World Journal of Modelling and Simulation, 11 (1). pp. 43-54. ISSN 1746-7233

Shetty, Rakshith and Deshpande, D V and Karanth, Vasudeva K (2015) Optimizing Performance and Fuel Economy of Power Generation using Model Based Design. International Journal of Scientific and Engineering Research, 6 (3). ISSN 2229-5518

Shivakumar, . and Vijay, G S and Pai, Srinivasa and Rao, Sriniviasa B R (2015) Performance and Emission Prediction in a Biodiesel Engine Fuelled with Honge Methyl Ester Using RBF Neural Networks. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9 (6). pp. 889-894.

Shivakumar, . and Pai, Srinivasa P and Rao , Shrinivasa B R and Vijay, G S (2015) Prediction of performance and emission characteristics in a biodiesel engine usingWCO ester: a comparative study of neural networks. Soft Computing.

Shivaprakash, Y M and Gurumurthy, B M and Sharma, S S and Jayashree, P K and Gowri Shankar, M C (2015) Production, testing and microstructural investigation on Fly ash reinforced Aluminium alloy matrix composite. International Journal of Applied Engineering Research, 10 (20). pp. 41583-41590. ISSN 0973-4562

Yathish, K and Binu, K G and D'Silva, Rolvin S and Shenoy, Satish B and Pai, Raghuvir B (2015) Static Characteristics of Two-Axial Groove Journal Bearing Operating on TiO2 Nanolubricant. Journal of Mechanical Engineering and Automation, 5 (3B). pp. 94-99.

Bhat, Chandrashekhar and Norohna, Dilifa Jossley and Saldana, Faber A (2015) Structural Performance Evaluation Of Modularized Wind Turbine Blade Through Finite Element Simulation. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9 (6). pp. 930-942.

Navad, Ganesh R and Marakala, Narasimha and Karanth, Vasudeva K and Sharma, Yagnesh N (2015) A Three Dimensional Finite Element Analysis for Contact Stress and Fatigue near the Fir-Tree Region in a Gas Turbine Blade. British Journal of Applied Science & Technology, 10 (2). pp. 1-11. ISSN 2231-0843

Prabhu, P R and Sharma, S S and Kulkarni, S M and Gowri Shankar, M C (2015) Turn-assisted Deep Cold Rolling: An Innovative Manufacturing Method for the improvement of fatigue life. International Journal of Applied Engineering Research, 10 (78). pp. 64-68. ISSN 0973-4562

Sharma, Karan and Naik, Nithesh and Prabhu, Aruna and George, Varghese (2014) Setup time reduction for cnc hobbing machine Implementing smed and design of “split fixture. International Journal of Mechanical And Production Engineering, 2 (11). pp. 83-88. ISSN 2320-2092

Arunachala, U C and Jhalaria, Anju and Sheikh, Mashhood (2014) Design, Fabrication and Performance Analysis of Solar Cooker for Night Cooking. International Journal of Renewable Energy and Environmental Engineering, 2 (4). ISSN 2348-0157

Gowri Shankar , M C and Jayashree, P K and Kini, Achutha U and Sharma , S S (2014) Effect of Silicon oxide (SIO2) Reinforced particles on ageing behavior of AI-2024 Alloy. International Journal Of Mechanical Engineering And Technology , 5 (9). pp. 15-21. ISSN 0976 – 6359

Sharma , S S and Jagannath, K and Prabhu, P R and Gowri Shankar , M C (2014) Mechanical property assessment of austempered and Conventionally hardened AISI 4340 Steel. International Journal Of Mechanical Engineering And Technology , 5 (9). 08-14. ISSN 0976 – 6359

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K (2014) Surface layer alterations in AISI 4140 steel from turn-assisted deep cold rolling process. International Journal Of Mechanical Engineering And Technology , 5 (9). pp. 245-250. ISSN 0976 – 6359

Chauhan, Vithal Rao and Dinesh, K R and Veeresh, K and Algur, Veerabhadrappa and Shettar, Manjunath (2014) Analysis of Mechanical Properties of Glass/Orthophthalic Polyster Resin with Hematite Ore Filled Composites. International Journal of Research (IJR), 1 (7). pp. 167-171. ISSN 2348-6848

Sutari, Orvilee and Rao, Sathish U (2014) Development of plant layout using systematic layout Planning (slp) to maximize production – A case study. International Journal of Mechanical And Production Engineering, 2 (8). pp. 63-66. ISSN 2320-2092

Pai, Srinath and Sharief, Abdul and Shivakumar, . and Sreeprakash, B (2014) High Injection Pressure Impact on a Direct Injection Diesel Engine. International Journal of Engineering Research & Technology (IJERT), 3 (8). pp. 1494-1498. ISSN 2278-0181

Naik, Nithesh and George, Varghese and Kowshik, Suhas C S (2014) Investigations on mesh discretization error in fem Based structural analysis using ansys. International Journal of Advanced Computational Engineering and Networking, 2 (8). pp. 17-22. ISSN 2320-2106

Deepak , D and Akash, Valavala and Natt, Winitthumkul and Anjaiah, D (2014) Machining of D2 heat treated steel using abrasive water jet: The effect of standoff distance and feed rate on Kerf width and surface roughness. International Journal of Research in Engineering and Technology, 3 (8). pp. 1-5. ISSN 2319-1163

Rajendra, Beedu and Ankit, . and Mohmed, Asif Shaik and Jain, Sushant (2014) Design, fabrication and performance analysis of solar power bicycle. International Journal of Renewable Energy and Environmental Engineering, 2 (3). pp. 192-194. ISSN 2348-0157

Bhat, Ritesh R and Shetty, Raviraj and Kumar, Kushal and Kumar, Manish and Rohilla, Yaman (2014) Investigation of Lean Tools to Enhance the Productivity in Indian Manufacturing Sector. International Journal of Manufacturing & Industrial Engineering, 1 (2). pp. 21-25.

Kini , Chandrakant R and Shenoy, Satish B and Sharma, Yagnesh N (2014) Thermo-structural analysis of HP stage gas turbine blades having helicoidal cooling ducts. International Journal of Advancements in Mechanical and Aeronautical Engineering, 1 (2). pp. 57-60. ISSN 2372-4153

Shetty, Raviraj and Denim, Anajwal and Revankar, Goutam D and Rao, Srikanth S and Shetty, Divakara S (2014) Characterization of Microstructure and Tribological Study on Heat Treated Titanium alloy (Ti-6Al-4V). International Journal of Current Engineering and Technology, 4 (3). pp. 2183-2188. ISSN 2277 – 4106

Shetty, Raviraj and Jose, Tony K and Revankar, Goutam D and Rao, Srikanth S and Shetty, Divakara S (2014) Surface Roughness Analysis during Turning of Ti-6Al-4V under Near Dry Machining using Statistical Tool. International Journal of Current Engineering and Technology, 4 (3). pp. 2061-2067. ISSN 2277 – 4106

Shetty, Nagaraj and Herbert, Mervin A and Shetty, Divakara S and Vijay, G S and Shetty, Raviraj (2014) Evaluation Of Drilling Induced Delamination Of Carbon Fiber Reinforced Polymer Composite Using Solid Carbide Drills. European Scientific Journal, 10 (15). pp. 279-292. ISSN 1857- 7431

Arunachala, U C and Bhatt, Siddhartha M and Sreepathi, L K (2014) Experimental Study With Analytical Validation of Thermally Driven Flow in Risers of Solar Water Heaters Under Varying Scale Thickness and Heat Flux. Journal of Solar Energy Engineering, 136. ISSN 0199-6231

Rao, Sathish U and Rodrigues, Lewlyn L R (2014) Impact of processfactors on twist drill wear in machininggfrp composites by applying taguchi design analysis and anova technique. International Journal of Advanced Technology & Engineering Research, 4 (3). pp. 12-17. ISSN 2250-3536

Sharma, Yagnesh N and Kini , Chandrakant R and Deepak , D and Joshi, Pratik Shamrao (2014) A computational fluid dynamic study On transient thermal characteristics Of two-phase gas metal arc welding Process. International Journal of Recent advances in Mechanical Engineering, 3 (2). pp. 27-34. ISSN 2200 – 5854

Prabhu, P R and Kulakarni, Satyabodh and Sharma , S S (2014) Turn-assisted deep cold rolling - a cost effective mechanical surface treatment technique for surface hardness enhancement. Journal of Manufacturing Engineering, 9 (1). 022-029.

George, Varghese and Mohanan, p (2014) The Effect of Cyclo- Alkane Additives in Waste Cooking Oil (WCO) B20 fuel on a Single Cylinder DI Diesel Engine. International Journal of Current Engineering and Technology (2). pp. 436-440. ISSN 2277 – 4106

Naik, Nithesh and Saba, Khan and Gogineni, Swetha and Krishnan, Shweta and Kowshik, Suhas C S and Shenoy, Prajwal (2014) Dynamic Behavioral Analysis of Electrical Contacts in Engine Starter Solenoid using Ansys®. International Journal of Current Engineering and Technology (2). pp. 580-585. ISSN 2277 - 4106

Shivamurthy, B and Murthy, Krishna and Joseph, Peter C and Rishi, Kabir and Bhat, Udaya K and Anandhan, S (2014) Mechanical properties and sliding wear behavior of jatropha seed cake waste/epoxy composites. Journal of Mater Cycle Waste Management.

Kumar, H S and Pai, Srinivasa P and Vijay, G S and Rao, Raj B K N (2014) Wavelet Transform for Bearing condition monitoring and fault diagnosis: A review. International journal of COMADEM, UK, 17 (1). ISSN 1363-7681

Revankar, Goutam D and Shetty, Raviraj and Rao, Srikanth S and Gaitonde, Vinayak N (2014) Analysis of Surface Roughness and Hardness in Titanium Alloy Machining with Polycrystalline Diamond Tool under Different Lubricating Modes. Materials Research, 17 (4). ISSN 1516-1439

Bhattacharya, Shoumyo and Basu, Arindam and Chowdhury, S and Upadhyaya, Y S (2014) Analysis of piston of two stroke engine. International Journal of Research in Engineering and Technology (IJRET), 3 (6). pp. 642-648. ISSN 2277 – 4378

Revankar, Goutam D and Shetty, Raviraj and Rao, Srikanth S and Gaitonde, Vinayak N (2014) Analysis of surface roughness and hardness in ball burnishing of titanium alloy. Measurement, 58. pp. 256-268.

Nayak, Rajesh and Shetty, Raviraj (2014) Cutting force and surface roughness in cryogenic Machining of elastomer. International Journal Of Mechanical Engineering And Technology , 5 (9). pp. 151-156. ISSN 0976 – 6359

Rajendra, Beedu and Modi, Pratik (2014) Design of Bio Gas Generation Plant Based on Food Waste. International Journal of Current Engineering and Technology (2). ISSN 2277 - 4106

Pai, Raghuvir B and Ayachit, Anurag and Khader, Abdul S M and Ahmed, K A and Rao, V R K and Kamath, Ganesh S and Gupta, PD (2014) Effect of postural changes on normal and stenosed common carotid artery using FSI. Australasian Physical & Engineering Sciences in Medicine, 37. pp. 139-152. ISSN 1879-5447

Mallya, Ravindra and Shenoy, Satish B and Pai, Raghuvir B (2014) Experimental Challenges and Solutions in Design and Operation of the Test Rig for Water Lubricated Journal Bearing. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 8 (11). pp. 1688-1691.

Shenoy, Srinivas H and Kini, Vijaya M and Pai, Raghuvir B and Shenoy, Satish B and Rao, Sathish U and Kini, Achutha U (2014) Flexural Strength Analysis of Starch Based Biodegradable Composite using Areca Frond Fibre Reinforcement. International Journal of Manufacturing Engineering.

Harisha, S R and Prabhu, Subramanya R B and Gangadharan, K V (2014) Implementation of Real Time Condition Monitoring of a Single Degree Freedom System Using Skyhook Control. Journal of Mechanical and Civil Engineering (IOSR-JMCE). pp. 77-80. ISSN 2278-1684

Nayak, Rajesh and Shetty, Raviraj and Shetty, Sawan (2014) Investigation of cutting force in elastomer machining using taguchi’s design of experiments. International Journal of Advanced Technology & Engineering Research, 4 (4). pp. 50-55. ISSN 2250-3536

Shetty, Pradeep Kumar and Shetty, Raviraj and Shetty, Divakara S (2014) Machinability Study on Dry Drilling of Titanium Alloy Ti-6Al-4V using L9 orthogonal array. Procedia Material Science, 5. pp. 2605-2614.

Anarghya, A and Gurumurthy, B M and Sharma , S S and Nitish, R and Yathish, R B (2014) Manual Stir Cast Processing Method, Hardness and Compression Characteristics of Quartz Reinforced Al Metal Matrix Composites. International journal of engineering sciences & research Technology, 3 (10). ISSN 2277-9655

Kamath , Raghavendra C and Kuttan, Appu K K (2014) Mechanistic Force Modeling for Broaching Process. International Journal of Manufacturing Engineering. ISSN 1433-3015

Kumar, Pradeep G and Shetty, Raviraj and Rodrigues, Lewlyn L R (2014) Overall Equipment Efficiency and Productivity of a News Paper Printing Machine of a Daily News Paper Company ‐ A Case Study. International Journal of Engineering Practical Research, 3 (1). pp. 20-27. ISSN 2326-5922

Jagannath, K and Lobo, Princeton (2014) Performance Evaluation of Thermoacoustic Refrigeration System. Journal of Refrigeration, Air Conditioning, Heating and Ventilation, 1 (1). pp. 22-29.

Vikas, Ramakrishna S and Maiya, Manjunatha U and Jayakumar, E and Rajan, T P D and Pai, B C and Nagaraja, . (2014) Processing and Characterization of SiCp Reinforced Functionally Graded AA 6061 Aluminium Metal Matrix Composites. International Journal of Advancements in Mechanical and Aeronautical Engineering, 1 (2). pp. 61-65. ISSN 2372-4153

Revankar, Goutam D and Shetty, Raviraj and Rao, Srikanth S and Gaitonde, Vinayak N (2014) Selection Of Optimal Process Parameters In Ball Burnishing Of Titanium Alloy. Machining Science and Technology - An international journal, 18. pp. 464-483. ISSN 532-2483

Kumar, H S and Pai, Srinivasa P and Sriram, N S and Vijay, G S (2014) Selection of Mother Wavelet for Effective Wavelet Transform of Bearing Vibration Signals. Advanced Materials Research, 1039. pp. 169-176. ISSN 1662-8985

Pai, Srinivasa P and Kumar, H S and Sriram, N S and Vijay, G S (2014) Selection of Mother Wavelet for Effective Wavelet Transform of Bearing Vibration Signals. Advanced Materials Research. pp. 169-176. ISSN 1662-8985

Binu, K G and Shenoy, Satish B and Rao, Srikanth D and Pai, Raghuvir B (2014) Static characteristics of a fluid film bearing with TiO2 based nanolubricant using the modified Krieger–Dougherty viscosity model and couple stress model. Tribology International, 75. pp. 69-79. ISSN 0301-679X

Mallya, Ravindra and Shenoy, Satish B and Pai, Raghuvir B (2014) Steady state characteristics of misalignedmultiple axial groove water-lubricated journal bearing. Journal of Engineering Tribology, 229 (6). pp. 712-722.

Sarda, Aditya and Nithesh, Naik and Krishna, Navaneeth and Shrivastva, Tarun and Prabhu, Aruna (2014) Study and Implementation of Quality Improvement Techniques to Improve the Consistency in Cold Crushing Strength of Iron Ore Pellets. Asian Journal of Engineering and Applied Technology, 3 (2). pp. 10-15. ISSN 2249-068X

Venkatesh, N and Gowrishankar, M C and Sumangala, C (2014) Study and analysis of implementation of Six-Sigma: A case study of an automobile industry. International Journal of Productivity and Quality Management, 13 (1).

Yathish, K and Binu, K G and Shenoy, Satish B and Rao, Srikanth D and Pai, Raghuvir B (2014) Study of TiO2 Nanoparticles as Lubricant Additive in Two-Axial Groove Journal Bearing. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 8 (11). pp. 1723-1729.

Pai, Srinath and Sharief, Abdul and Shivakumar, . and Ramachandra, C G and Sreeprakash, B (2014) Study of fuel injection pressure and injection timing effect on a diesel engine performance and emission. International Journal of Research in Science And Technology, 4 (3). pp. 71-80. ISSN 2249-0604

Binu, K G and Shenoy, B S and Rao, Srikanth D and Pai, Raghuvir B (2014) A variable Viscosity Approach for the Evaluation of load Carrying Capacity of oil lubricated Journal Bearing with TiO2 Nanoparticles as lubricant Additives. Procedia Materials Science, 6. pp. 1051-1067. ISSN 2211-8128

Shivakumar, . and Karanth, Vasudeva K (2013) Numerical Analysis of a Helical Coiled Heat Exchanger using CFD. International Journal of Thermal Technologies, 3 (4). pp. 126-130. ISSN 2277 - 4114

Shivaprakash, Y M and Basavaraj, Yadavalli and Sreenivasa Prasad, K V (2013) Comparative study of tribological characteristics of Aa2024+10% fly ash composite in non-heat treated and Heat treated conditions. International Journal of Research in Engineering and Technology (IJRET), 2. pp. 275-280. ISSN 2277 – 4378

Shetty, Nagaraj and Herbert, Mervin A and Shetty, Divakara S and Vijay, G S and Shetty, Raviraj (2013) Investigation into the Effects of Process Parameters on Surface Roughness in Drilling of BD-CFRP Composite Using HSS Twist Drills. International Journal of Current Engineering and Technology, 3 (4). pp. 1320-1326. ISSN 2277 - 4106

Kumar, H S and Pai, Srinivasa P and Sriram, N S and Vijay, G S (2013) Rolling Element Bearing Condition Classification using Hoelder Exponents. NMAMIT Annual Research Journal, 3. pp. 43-48. ISSN 2249-0426

Sharma , S S and Prabhu, P R and Jayashree, P K and Gowri Shankar , M C and Porwal, Suvit and Singh, Harshdeep (2013) The Tensile and Wear Property Enhancement of Al – Zn –Mg Alloys by Precipitation Hardening and Thermomechanical Treatments. International Journal of Current Engineering and Technology, 3 (4). pp. 1510-1515. ISSN 2277 - 4106

Shetty, Nagaraj and Herbert, Mervin A and Shetty, Divakara S and Vijay, G S and Shetty, Raviraj (2013) Evaluation of thrust force in drilling of BD-CFRP composite using taguchi analysis, response surface methodology and neural network. European Scientific Journal, 9 (27). pp. 147-164. ISSN 1857- 7431

Kamath, Giridhar B and Khosla, Dhanishth (2013) Organizational learning and financial performance: A system dynamics approach. International research journal of commerce, business and social sciences, 2 (6). pp. 76-78. ISSN 2277-9310

Khader, Abdul S M and Pai, Raghuvir B and Ayachit, Anurag and Ahmed, K A and Rao, V R K and Kamath, Ganesh S (2013) Comparative Study of Blood Flow through Normal and Stenosed Common Carotid Artery Using Fluid-Structure Interaction. International Journal of Earth Sciences and Engineering, 6 (4). pp. 866-871. ISSN 0974-5904

Shetty, Nagaraj and Herbert, Mervin A and Shetty, Divakara S and Shetty, Raviraj and Shivamurthy, B (2013) Effect of Process Parameters on Delamination, Thrust force and Torque in Drilling of Carbon Fiber Epoxy Composite. Research Journal of Recent Sciences, 2 (8). pp. 47-51. ISSN 2277-2502

Madhwesh, N and Karanth, Vasudeva K and Sharma, Yagnesh N (2013) Effect of staggered splitters on the flow characteristics in a Centrifugal Fan – A Numerical study. International Journal of Earth Sciences and Engineering, 6 (4). pp. 821-825. ISSN 0974-5904

Gowri Shankar, M C and Jayashree, P K and Shetty, Raviraj and Kini, Achutha U and Sharma , S S (2013) Individual and Combined Effect of Reinforcements on Stir Cast Aluminium Metal Matrix Composites-A Review. International Journal of Current Engineering and Technology, 3 (3). pp. 922-934. ISSN 2277 - 4106

Shivaprakash, Y M and Gowri Shankar , M C and Sreenivasa Prasad, K V and Basavaraj, Yadavalli (2013) Investigations on ALFA Composite Produced by Powder Metallurgy Route. International Journal of Earth Sciences and Engineering, 6 (4). pp. 816-820. ISSN 0974-5904

Manjunath, M S and Karanth, Vasudeva K and Sharma, Yagnesh N (2013) Numerical Analysis of a Convex Corrugated Solar Absorber Plate Configuration for Enhanced Heat Transfer Characteristics. International Journal of Earth Sciences and Engineering, 6 (4). pp. 122-131. ISSN 0974-5904

Pai, Raghuvir B and Khader, Abdul S M and Ayachit, Anurag and Ahmed, K A and Rao, V R K and Kamath, Ganesh S (2013) Patient Specific Fluid-Structure Interaction Study of Cerebral Aneurysm. International Journal of Earth Sciences and Engineering, 6 (4). pp. 826-831. ISSN 0974-5904

Shivaprakash, Y M and Sreenivasa Prasad, K V and Basavaraj, Yadavalli (2013) Production and Tribological Characteristics of Heat Treated AA2024-Fly Ash Composite. International Journal of Current Engineering and Technology, 3 (3). pp. 1029-1041. ISSN 2277 - 4106

Jayashree, P K and Gowri Shankar, M C and Kini, Achutha U and Sharma , S S and Shetty, Raviraj (2013) Review on Effect of Silicon Carbide (SiC) on Stir Cast Aluminium Metal Matrix Composites. International Journal of Current Engineering and Technology, 3 (3). pp. 1061-1071. ISSN 2277 - 4106

Gowri Shankar , M C and Shivaprakash, Y M and Jayashree, P K and Sharma , S S (2013) Study on Chip-morphology in Turning of Ti-6Al-4V Alloy under High Pressure Neat oil and Soluble oil. International Journal of Earth Sciences and Engineering, 6 (4). pp. 832-837. ISSN 0974-5904

Karanth, Vasudeva K and Manjunath, M S and Sharma, Yagnesh N (2013) Three Dimensional CFD analysis of Solar Air Heater for Enhancement of Thermal Performance using Surface Corrugation. International Journal of Earth Sciences and Engineering, 6 (4). pp. 851-855. ISSN 0974-5904

Prabhu, Satish and Nayak, Gurudas C and Shenoy, Satish B (2013) Water desalinationusing using Renewable Energy Sources. Asian Academic Research Journal of Multidisciplinary, 1 (12). pp. 395-404. ISSN 2319-2801

Bhat, Ritesh R and Shetty, Raviraj (2013) Investigation of Lean Tools to Enhance Productivity in Manufacturing Sector. International Journal of Advances in Engineering Sciences, 3 (3). pp. 116-120. ISSN 2231-0347

Shetty, Nagaraj and Herbert, Mervin A and Shetty, Divakara S and Shetty, Raviraj and Murthy, B R N (2013) Investigation Into The Effects Of Process Parameters On Delamination During Drilling Of Bd-Cfrp Composite Using Taguchi Design Of Experiments And Response Surface Methodology. International Journal Of Mechanical Engineering And Technology , 4 (3). pp. 136-148. ISSN 0976 – 6359

Raghunandana, K and John, * and Kantharaj, A N (2013) Stability of Journal Bearing considering Slip Bearing Condition;A Non-Linear Trasient Analysis. International Journal of Applied Science & Technology Research Excellence, 3 (1). pp. 46-50. ISSN 2250-2726

Arunachala, U C and Sreepathi, L K and Bhatt, Siddhartha M (2013) Analytical studies on drop of H-WB constants due to scaling in natural circulation flat plate solar water heater. International Journal of Sustainable Energy. ISSN 1478-646X

Baishya, Nystha and Rao, Sathish U and Diwakar, Sharath (2013) Applying Lean Manufacturing Tool (Smed/Qco) To Overcome Additional Investment For Meeting Customer Needs – A Study At Robert Bosch (I) Limited. Advanced Materials Research, 622-62. pp. 1846-1851. ISSN 1662-8985

Baishya, Nystha and Rao, Sathish U (2013) Applying smed/qco tool to improve the productivity At screwing station of hfr assembly – a study at Robert bosch (i) limited. International Journal of Mechanical and Industrial Engineering, 3 (1). pp. 33-36. ISSN 2231-6477

Jagannath, K and Sharma , S S and Mohan, N S and Prabhu, P R (2013) Characteristic study for low melting point MMC using stir casting technique. World Journal of Engineering, 10 (6). pp. 529-534. ISSN 1708-5284

Padmaraj, N H and Kini, Vijaya M and Pai, Raghuvir B and Shenoy, Satish B (2013) Development of Short Areca Fiber Reinforced Biodegradable Composite Material. Procedia Engineering, 64. pp. 966-972.

Padmaraj, N H and Kini, Vijaya M and Pai, Raghuvir B and Shenoy, Satish B (2013) Development of Short Areca Fiber Reinforced Biodegradable Composite Material. Procedia Engineering, 64. pp. 966-972.

Shivaprakash, Y M and Sreenivasa Prasad, K V and Basavaraj, Yadavalli (2013) Dry Sliding Wear Characteristics of Fly Ash Reinforced AA2024 Based Stir Cast Composite. International Journal of Current Engineering and Technology, 3 (3). pp. 911-921. ISSN 2277 - 4106

Kini, Achutha U and Jagannath, K and Sharma , S S and Bhat, Chandrashekhar and Shetty, Prakash and Shetty, Divakara S (2013) Effect of Ethyl-2-phenyl-hydrozono-3-oxobutyrate on the Corrosion inhibition of AA 6061 in HCl medium. International Journal of Research in Engineering and Technology (IJRET), 2 (3). pp. 132-136. ISSN 2277 – 4378

Arunachala, U C and Bhatt, Siddhartha M and Sreepathi, L K (2013) Experimental and Theoretical Validation of Numerical code to Analyze the Performance of Thermosiphon Flat Plate Solar Water Heater. International Journal of Research in Engineering and Technology, 2 (6). ISSN 2319-1163

Sharma , S S and Jagannath, K and Bhat, Chandrashekhar and Kini, Achutha U and Prabhu, P R and Jayashree, P K and Gowri Shankar , M C (2013) Improvement in Mechanical Properties of AISI 4147 Spring Steel through Heat Treatment Technique. International Journal of Research in Engineering and Technology (IJRET), 2 (3). pp. 127-131. ISSN 2277 – 4378

Shivakumar, . and Pai, Srinivasa P and Rao, Sriniviasa B R (2013) Influence of injection timings on performance and emissions of a biodiesel engine operated on blends of Honge methyl ester and prediction using artificial neural network. Journal of Mechanical Engineering Research, 5 (1). pp. 5-20. ISSN 2141-2383

Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2013) Inhibition of corrosion of stainless steel (304 SS) by N-(2-mercaptophenyl)-N’-phenyl thiourea in hydrochloric acid. Indian Journal of Chemical Technology, 20 (5). pp. 317-322. ISSN 0975-0991

Jagannath, K and Sharma , S S and Bhat, Chandrashekhar and Kini, Achutha U and Prakash, Prannoy (2013) Low cost traction control system for two wheeler. International Journal of Research in Engineering and Technology (IJRET), 2 (3). ISSN 2277 – 4378

Shivamurthy, B and Bhat, Udaya K and Anandhan, S (2013) Mechanical and sliding wear properties of multi-layered laminates from glass fabric/graphite/epoxy composites. Materials and Design, 44. pp. 136-143.

Sharma , S S and Jagannath, K and Prabhu, P R (2013) Microstructure and Mechanical Characterization of Heat Treated Stir Cast Silica (Sea Sand) Reinforced 7XXX Al Alloy MMCs. World Academy of Science, Engineering and Technology, 7 (1). pp. 1356-1361. ISSN 2010-3778

Bhat, Chandrashekhar and Deepak, P D and Ramakumar, B V N and Jagannath, K and Sharma , S S and Kini, Achutha U (2013) Numerical Investigation of Heat Transfer Characteristics of Nozzle Ribs in a Gas Turbine Blade. International Journal of Research in Engineering and Technology (IJRET), 2 (5). pp. 209-217. ISSN 2277 – 4378

Rodrigues, Lewlyn L R and Murthy, B R N (2013) Optimization of the Process Parameters to Minimize the Surface Roughness in Drilling of CFRP Composites using Taguchi Method and RSM. International Journal of Current Engineering and Technology, 3 (3). pp. 1007-1012. ISSN 2277 - 4106

Shivakumar, . and Pai, Srinivasa P and Rao, Sriniviasa B R (2013) Prediction in a biodiesel Engine using MLP and RBFFNN Networks-A Comparision. International Journal of Research in Engineering and Technology (IJRET), 2 (5). pp. 287-291. ISSN 2277 – 4378

Kumar, Rajesh B and Vardhan, Harsha and Govindaraj, M and Vijay, G S (2013) Regression analysis and ANN models to predict rock properties from sound levels produced during drilling. International Journal of Rock Mechanics & Mining Sciences, 58. pp. 61-72. ISSN 1365-1609

Naik, Nithesh and Bhat, Chandrashekhar and Rao, Pallanti and Christopher, J and Faber, Saldanha and Shenoy, Prajwal (2013) Simulation of Contact Bouncing Behavior in Starter Solenoid and Exploring Potential Feasible Solution. Applied Mechanics and Materials, 367. pp. 204-208.

Umananda, K V and Shetty, Divakara S and Sharma , S S (2013) Study of Mechanical and Corrosion Properties of AISI 50110 (EN31) Steel with and without Heat Treatment. International Journal of Mechanical Engineering & Research, 3 (5). 396 -400. ISSN 2249 - 0019

Baliga, Ravishanker B and Shenoy, Satish B and Rao, Sathish U and Bhat, Vijendra V (2013) Synthesis and Mechanical Characterization of C.N.F Reinforced PUC composite. International Journal of Chemical and Environmental and Biological Sciences(IJCEBS), 1 (4). pp. 697-700. ISSN 2320-4079

Shetty, Pradeep Kumar and Varambally , KVM and Rodrigues, Lewlyn L R (2012) A Methodology for Implementing Total Productive Maintenance in Manufacturing Industries–A Case Study. International Journal of Engineering Research and Development, 5 (2). pp. 32-39. ISSN 2278-067X

Priyodip, P and Balaji, S and Kini, Vijaya M (2012) Physio-chemico-thermo- mechanical properties of selected biodegradable polymers. Green Materials.

Baishya, Nystha and Rao, Sathish U and Sharath, Diwakar (2012) Overcoming Additional Investment to Meet Customer Needs by Applying Smed/Qco Tool – A Study. Research Journal of Recent Sciences, 1 (11). pp. 59-63. ISSN 2277-2502

Barboza, A B V and Sudhir, C V and Sharma, Yagnesh N (2012) Performance, Emissions & Cyclic Combustion Studies of CI engine using Jatropha B20 Fuel. International Journal of Earth Sciences and Engineering, 5 (4). pp. 1073-1077. ISSN ISSN 0974-5904

Jagannath, K (2012) Evaluation of Critical speed of Generator rotor with external load. International Journal of Engineering Research and Development, 1 (11). pp. 11-16. ISSN 2278-067X

Jaiswal, Ashish and Rao, Santhosha and Shama, Kumara (2012) Application Aware Energy Efficient Geographic Greedy Forwarding in Wireless Multimedia Sensor Networks. International Journal of Engineering and Advanced Technology, 1 (5). pp. 222-227. ISSN 2249 – 8958

Nayak, Rajesh and Shetty, Raviraj and Shetty, Sawan (2012) Experimental and Finite Element Analysis on chip Formation Mechanism in Machining of Elastomers. Bonfring International Journal of Industrial Engineering and Management Science, 2 (2). pp. 10-13. ISSN ISSN 2277-5056 |

Jagannath, K (2012) Performance Evaluation of a Solar Drier with concentrator. Cooling India, 8 (3). pp. 32-35.

Murthy, B R N and Rodrigues, Lewlyn L R and Anjaiah, D (2012) Process Parameters Optimization in GFRP Drilling through Integration of Taguchi and Response Surface Methodology. Research Journal of Recent Sciences, 1 (6). pp. 7-15. ISSN 2277-2502

Rao, Sathish U and Rodrigues, Lewlyn L R (2012) Applying Wear Maps in the Optimisation of Machining parameters in Drilling of Polymer Matrix Composites – A Review. Research Journal of Recent Sciences, 1 (5). pp. 75-82. ISSN 2277-2502

Jagannath, K (2012) Prediction of Inter-Laminar stresses in composite laminates using mixed finite element model. International Journal of Management, IT and Engineering, 2 (5). pp. 325-338. ISSN 2249-0558

Pratik, . and Emran, Mohammad Arshad and Deepak , D and Anjaiah, D (2012) Investigations on the Effect of process Parameters on the Quality of Machined Surface in Laser beam Machining of MILD Steel. International Journal of Research and Reviews in Engineering Sciences, 1 (1). pp. 45-51.

Shivakumar, . and Pai, Srinivasa P and Rao, Sriniviasa B R (2012) Prediction of performance parameters using artificial neural network and regression models in a bio-diesel engine using Honge methyl ester. TE RI Information Digest on Energy and Environment, 11 (1).

Shenoy, Satish B and Binu, K G and Pai, Raghuvir B and Rao, Srikanth D and Pai, Rammohan S (2012) Effect of Nanoparticles additives on the performance of an externally adjustable fluid film bearing. Tribology International, 45 (1). pp. 38-42. ISSN 0301-679X

Deepak , D and Anjaiah, D and Karanth, Vasudeva K and Sharma, Yagnesh N (2012) CFD Simulation of Flow in an AbrasiveWater Suspension Jet: The Effect of Inlet Operating Pressure and Volume Fraction on Skin Friction and Exit Kinetic Energy. Advances in Mechanical Engineering, 2012. pp. 1-8.

Deepak , D and Anjaiah, D and Karanth, Vasudeva K and Sharma, Yagnesh N (2012) CFD Simulation of Flow in an AbrasiveWater Suspension Jet: The Effect of Inlet Operating Pressure and Volume Fraction on Skin Friction and Exit Kinetic Energy. Advances in Mechanical Engineering.

Sharma , S S and Jagannath, K and Bhat, Chandrashekhar and Prabhu, P R (2012) Cold Deformation Effect on the Conventionally Aged Stircast Iron Powder Reinforced Aluminum Alloy Metal Matrix Composites. International Journal of Research in Engineering and Technology, 1 (3). ISSN 2277 – 4378

Manjunath, M S and Karanth, Vasudeva K and Sharma, Yagnesh N (2012) A Comparative CFD study on Solar Dimple Plate Collector with Flat Plate Collector to Augment the Thermal Performance. World Academy of Science, Engineering and Technology, 2012 (70). pp. 969-975. ISSN 2010-3778

Kini , Chandrakant R and Shenoy, Satish B and Sharma, Yagnesh N (2012) Computational Conjugate Heat Transfer Analysis of HP Stage Turbine Blade Cooling:Effect of Turbulator Geometry in Helicoidal Cooling Duct. World Academy of Science, Engineering and Technology, 2012 (70). pp. 645-652. ISSN 2010-3778

Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2012) Corrosion Inhibition of 6061 Al alloy– 15 vol% SiC(p) Composite in 0.5 M Hydrochloric Acid Solution. International Journal of Biological, Ecological and Environmental Sciences (IJBEES), 1 (3). pp. 77-81. ISSN 2277 – 4394

Rodrigues, Lewlyn L R and Kantharaj, A N and Kantharaj, B and Freitas, W R C and Murthy, B R N (2012) Effect of Cutting Parameters on Surface Roughness and Cutting Force in Turning Mild Steel. Research Journal of Recent Sciences, 1 (10). pp. 19-26. ISSN 2277-2502

Vijay, G S and Kumar, H S and Pai, Srinivasa P and Sriram, N S and Rao, Raj B K N (2012) Evaluation of Effectiveness ofWavelet Based Denoising Schemes Using ANN and SVM for Bearing Condition Classification. Computational Intelligence and Neuroscience.

Fernandes, Neville and Shenoy, Satish B and Pai, Raghuvir B and Pai, Rammohan S and Rao, Srikanth D (2012) Evaluation of Stiffness and Damping Coefficients of Multiple Axial Groove Water Lubricated Bearing Using Computational Fluid Dynamics. World Academy of Science, Engineering and Technology, 70. pp. 1180-1185. ISSN 2010-3778

Kundapur, Pratibha Panduranga and Sharma, Yagnesh N and Gopalkrishna , B (2012) Evaluation of Stress contours on a Maxillary molar Subjected to Simulated tooth loads by finite element analysis Technique. Archives of Orofacial Sciences, 7 (2). pp. 43-49. ISSN 1823-8602

Pratibha, PK and Sharma, Yagnesh N and Gopalkrishna , B (2012) Evaluation of stress contours on a maxillary molar subjected to simulated tooth loads by finite element analysis technique. Archives of Orofacial Sciences, 7 (1). pp. 1-6. ISSN 2231-7163

Prabhu, P R and Kulkarni, S M and Sharma , S S (2012) Experimental Investigations of Process Parameters Influence on Surface Roughness in Deep Cold Rolling of AISI 4140 Steel. International Journal of Research in Engineering and Technology, 1 (3). pp. 159-163. ISSN 2277 – 4378

Khader, Abdul S M and Ayachit, Anurag and Pai, Raghuvir B and Rao, V R K and Kamath, Ganesh S (2012) FSI Simulation of Common Carotid under Normal and High Blood Pressures. Advances in Mechanical Engineering.

Barboza, A B V and Madhwesh, N and Sudhir, C V and Sharma, Yagnesh N (2012) Influence of Injection Timing and Injector Opening Pressure on Combustion Performance and P-θ Characteristics of a CI Engine Operating on Jatropha B20 Fuel Operating on Jatropha B20 Fuel. World Academy of Science, Engineering and Technology, 70. pp. 628-633. ISSN 2010-3778

Murthy, Krishna and Madhwesh, N and Rao , Shrinivasa B R (2012) Influence of Injection Timing on the Performance of Dual Fuel Compression Ignition Engine with Exhaust Gas Recirculation. International Journal of Engineering Research and Development, 1 (11). pp. 36-42. ISSN 2278-067X

Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M and Herle, Ramadev (2012) The Inhibition Action of Ethyl-2 Phenyl Hydrozono-3 Oxobuyrate on the Corrosin of 6061 Al Alloy\Sicp Compposite in Hydrochloric Acid medium OXOBUTYRATE ON THE CORROSION OF 6061 Al ALLOY/SiCp COMPOSITE IN HYDROCHLORIC ACID MEDIUM. Journal of the Chilean Chemical Society, 54 (5). pp. 331-334. ISSN 0717-9707

Deepak , D and Anjaiah, D and Sharma, Yagnesh N (2012) Numerical Analysis of Flow through Abrasive Water Suspension Jet: The Effect of Garnet,Aluminum Oxide and Silicon Carbide Abrasive on Skin Friction Coefficient Due To Wall Shear and Jet Exit Kinetic Energy. World Academy of Science, Engineering and Technology, 70 (128). pp. 680-685.

Kini , Chandrakant R and Shenoy, Satish B and Sharma, Yagnesh N (2012) Numerical Analysis of Gas Turbine HP Stage Blade Cooling with New Cooling Duct Geometries. International Journal of Earth Sciences and Engineering, 5 (4). pp. 1057-1061. ISSN 0974-5904

Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Herle, Ramadev (2012) Propanoyl(1Z)-N-(2,6-dimethylphenyl)-2- oxopropanehydrazonoate as inhibitor for corrosion of 6061 Al alloy15 % (v)SiC(p) composite in hydrochloric acid media hydrochloric acid media. IIUM Engineering Journal, 13 (2). ISSN 1511-788X

Vijay, G S and Pai, Srinivasa P and Sriram, N S and Rao, Raj B K N (2012) Radial basis function neural network based comparison of dimensionality reduction techniques for effective bearing diagnostics. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.

Shivakumar, . and Pai, Srinivasa P and Rao, Sriniviasa B R (2012) Radial-Basis-Function-Network-Based Prediction of Performance and Emission Characteristics in a Bio Diesel EngineRun on WCO Ester. Advances in Artificial Intelligence.

Pai, Raghuvir B and Rao, Srikanth D and Shenoy, Satish B and Pai, Rammohan S (2012) Stability Characteristics of a Tri-taper Journal Bearing: a Linearized Perturbation Approach. Journal of Materials Research and Technology.

Upadhyaya, Y S and Sridhara, B K (2012) Strain Controlled Fatigue Life Prediction of Materials. International Journal of Research in Engineering and Technology, 1 (3). pp. 153-157. ISSN 2277 – 4378

Vijay, G S and Kumar, H S and Pai, Srinivasa P and Sriram, N S (2012) Support Vector Machine based bearing defect classification using wavelet denoised vibration signal. NMAMIT Annual Research Journal, 2. pp. 27-32. ISSN 2249-0426

Bhat, Chandrashekhar and Anoop, A D and Gopinath, K and Jagannath, K and Sharma , S S and Prabhu, P R (2012) Surface Failure and Fatigue Life investigation of Boron Steel. International Journal of Research in Engineering and Technology, 1 (3). pp. 167-171. ISSN 2277 – 4378

Ramesh, B N and Suresha, B and Chandramohan, G and Anjaiah, D (2012) Three-Body Abrasive Wear Behaviour of Microfiller-Filled Carbon–Epoxy Composites: A Factorial Design Approach. Composite Interfaces, 18. pp. 783-800.

Prabhu, P R and Kulkarni, S M and Sharma , S S (2011) Mechanical Surface Enhancement (MSE) Techniques for Fatigue Life Improvement-A Review. Journal of Manufacturing Engineering,, 6 (4). pp. 211-219.

Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2011) Corrosion inhibition of 6061 aluminium alloy/SiCp composite in hydrochloric acid medium using 3-chloro-1-benzothiophene-2-carbohydrazide. Indian Journal of Chemical Technology, 18. pp. 439-445. ISSN 0971-457X

Shenoy, Satish B and Pai, Raghuvir B (2011) Effect of Turbulence on the Static performance of a Misaligned externally Adjustable fluid film bearing Lubricated with couple stress fluids. Tribology International, 44 (12). pp. 1774-1781. ISSN 0301-679X

Shivaprakash, Y M and Sreenivasa Prasad, K V and Basavaraj, Yadavalli (2011) Synthesis and mechanical characterization of ALFA composites. International Journal of Engineering and Social Science, 1 (2). pp. 115-126. ISSN 2249- 9482

Upadhyaya, Y S and Sridhara, B K (2011) Fatigue life prediction: A Continuum Damage Mechanics and Fracture Mechanics approach. Materials and Design, 35. pp. 220-224. ISSN 0261-3069

Potti Srinivasa, Rao and Raghunandana, K (2011) Autonomy of Technical Education: A Comparative Analysis through Teachers’ Outlook. Indian Journal of Technical Education, 34 (3). pp. 19-26.

Shivamurthy, B and Anandhan, S and Bhat, Udaya K and Shetty, Divakara S (2011) Fretting wear performance of glass/epoxy composites. Manufacturing Technology Today, 1. pp. 17-21.

Umashankar, K S and Gangadharan, K V and Desai, Vijay and Shivamurthy, B (2011) Machining characteristics of Nanocomposites. Advanced Materials Letters, 2 (3). pp. 222-226. ISSN 0976-3961

Murthy, Krishna and Madhwesh, N and Srinivasa , Rao B R (2011) Computational Modelling of Compression Process in a Dual Fuel Compression Ignition Engine. International Journal of Earth Sciences and Engineering, 4 (4). pp. 63-67. ISSN ISSN 0974-5904

Raghunandana, K and Corda, John V (2011) Static Characteristics of a Journal Bearing with Engineered Slip/No-Slip Surfaces. International Journal of Earth Sciences and Engineering, 4 (4). pp. 26-32. ISSN 0974-5904

Pai, Srinivasa P and Vijay, G S and Sriram, N S (2011) Fault Diagnosis of Rolling Element Bearings using Vibration Signal Analysis – A Soft Computing Approach. NMAMIT Annual Research , 1. pp. 44-51. ISSN 2249-0426,

Khader, Abdul S M and Shenoy, Satish B and Pai, Raghuvir B and Kamath, Ganesh S and Sharif, Nabeel Md and Rao, V R K (2011) Effect of increased severity in patient specific stenosis of common carotid artery using CFD—a case study. World Journal of Modelling and Simulation, 7 (2). pp. 113-122. ISSN 1746-7233

Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2011) Corrosion Inhibition of 304 SS in Hydrochloric Acid Solution by N – Furfuryl N'– Phenyl Thiourea. Portugaliae Electrochimica Acta, 29 (2). pp. 69-78. ISSN 1647-1571

Herle, Ramadev and Shetty, Divakara S and Kini, Achutha U and Shetty, Prakash (2011) Inhibiting Effect of N-cyclohexyl-N0-phenyl Thiourea on the Corrosion of 304 SS in Hydrochloric Acid Solution. Chemical Engineering Communications, 198 (1). pp. 120-130. ISSN 0098-6445

Shivakumar, . and Pai, Srinivasa P and Rao, Sriniviasa B R (2011) Artificial Neural Network based prediction of performance and emission characteristics of a variable compression ratio CI engine using WCO as a biodiesel at different injection timings. Applied Energy, 88.

Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2011) Corrosion Inhibition of Stainless Steel in Hydrochloric Acid by N - (2-mercaptophenyl) -N/ -phenyl Thiourea. International Journal of Chemistry and Applications, 3 (2). pp. 151-158. ISSN 0974-3111

Shenoy, Satish B and Pai, Raghuvir B (2011) Dynamic Characteristics of a single pad externally adjustable fluid film bearing. Industrial Lubrication and Tribology, 63 (3). pp. 146-151. ISSN 0036-8792

Shenoy, Satish B and Pai, Raghuvir B (2011) Dynamic characteristics of a Single pad externally adjustable fluid film bearing. Industrial Lubrication and Tribology, 63 (3). pp. 146-151. ISSN 0036-8792

Prabhu, P R and Kulkarni, S M and Sharma , S S (2011) An Experimental Investigation on the Effect of Deep cold Rolling Parameters on Surface Roughness and Hardness of AISI 4140 Steel. World Academy of Science, Engineering and Technology, 60. pp. 1594-1598. ISSN 2010-3778

Deepak , D and Anjaiah, D and Sharma, Yagnesh N (2011) Numerical Analysis of Flow through Abrasive Water uspension Jet: The Effect of Inlet Pressure on Wall Shear and Jet Exit Kinetic Energy. Lecture Notes in Engineering and Computer Science, 2192. pp. 2004-2008. ISSN 2078-0966

Arunachala, U C (2011) Performance Deterioration of Thermosiphon Solar Water Heater due to Scaling. IIUM Engineering Journal, 12 (3). ISSN 1511-788X

Jagannath, K (2011) Performance analysis of atmospheric water generator. Cooling India , 7 (5). pp. 30-31.

Prabhu, Vijendra and Rao, Satish BS and Rao, Nageshwara B and Aithal, Kiran B and Shenoy, Satish B and Mahato, K K (2010) Development and evaluation of an optical fibre-based helium-neon laser irradiation system for tissue regeneration: A pilot study. Pramana - journal of physics, 75 (6). pp. 1287-1293. ISSN 0973-7111

Arunachala, U C and Bhatt, Siddhartha M and Sreepathi, L K (2010) Scaling Effect of Direct Solar Hot Water Systems on Energy Efficiency. Journal of Solar Energy Engineering, 132 (4). ISSN 0199-6231

Rao, Srikanth D and Shenoy, Satish B and Pai, Rammohan S and Pai, Raghuvir B (2010) Stability of Tri-taper journal bearings under Dynamic load using a Non-linear Transient method. Tribology International, 43 (9). pp. 1584-1591. ISSN 0301-679X

Karanth, Vasudeva K and Sharma, Yagnesh N (2010) Numerical analysis of a Centrifugal fan for Performance Enhancement using Boundary layer suction slots. Journal of Mechanical Engineering Science, 224 (8). pp. 1665-1678. ISSN 1665-1678

Jagannath, K (2010) Effect of roughness on journal Bearing performance with non-Newtonian fluids. Journal of Mechanical Engineering, 7 (1). pp. 1-13. ISSN 1823-5514

Murthy, Krishna and Mahesha, G T and Rao , Shrinivasa B R and Samaga, B S (2010) Application of EGR for NOx Control in LPG - Diesel Dual Fuel CI Engine. International Journal of Advances in Thermal Sciences and Engineering, 1. pp. 37-43. ISSN 0976-6820

Kamath, Vasanth and Rodrigues, Lewlyn L R and Desai, Pradeep V (2010) Innovation Dynamics In 21st century : A System Dynamics Approach. IJSSST, 11 (2). ISSN 1473-804x

Bhat, Chandrashekhar and Bhat, M R and Murthy, C R L (2010) Artificial Neural Network Analysis for Acoustic Emission Signal and its significance in failure characterisation of composites. Journal of Non destructive Testing & Evaluation.

Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2010) Corrosion Inhibition of 6061 Al alloy–15 vol% SiC(p) Composite in 0.1 M Hydrochloric Acid. Journal of the Chilean Chemical Society, 55 (1). pp. 56-60. ISSN 0717-9707

Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M and Herle, Ramadev (2010) Corrosion inhibition behaviour of N-Naphthyl-N'-Phenyl Thiourea on 6061 Al Alloy/SiCp composite in hydrochloric acid medium. International Journal of Contemporary Science, Engineering and Technology, 1 (1-2). pp. 1-3.

Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2010) Corrosion inhibition of 304 ss in hydrochloric acid solution by n-cyclohexyl-n'-phenyl thiourea. International journal of Contemporary Science, Engineering and Technology, 1 (1). pp. 39-42.

Bhat, Chandrashekhar and Sharma , S S and Jagannath, K and Mohan, N S and Sathisha, S G (2010) Design and Analysis of a Expansion Chamber Mufflers. World Journal of Engineering, 7 (3). pp. 117-118. ISSN 1708-5284

Kini, Vijaya M and Chincholkar, A M (2010) Effect of machining parameters on surface roughness and material removal rate in finish turning of ±30� glass fibre reinforced polymer pipes. Materials and Design, 31. pp. 3590-3598. ISSN 0261-3069

Shivakumar, . and Pai, Srinivasa P and Rao, Sriniviasa B R and Samaga, B S (2010) Experimental investigation and Neural network based prediction of performance and Emission characteristics of a 4 stroke c.!. engine with wco as biodiesel. International Journal on Mechanical & Automobile Engineering, 8 (3). pp. 50-64. ISSN 0974-231X,

Umashankar, K S and Gangadharan, K V and Desai, Vijay and Shivamurthy, B (2010) Fabrication and Investigation of Damping Properties of Nano Particulate Composites. Journal of Minerals & Materials Characterization & Engineering, 9 (9). pp. 819-830. ISSN 1539-2511

Prabhu, P R and Kulkarni, S M and Sharma , S S (2010) Influence of deep cold rolling and low plasticity burnishing on surface hardness and surface roughness of AISI 4140 steel. World Academy of Science, Engineering and Technology, 72. pp. 619-624. ISSN 2010-3778

Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M and Herle, Ramadev (2010) The Inhibition action of Ethyl-2-Phenyl Hydrozono-3-Oxobutyrate on the corrosion of 6061 Al alloy/SiCp Composit in Hydrochloric acid medium. Journal of Chilean Chemical Society, 54 (1). pp. 331-335. ISSN 0717-9707

Mohan, N S and Jagannath, K and Sharma , S S and Bhat, Chandrashekhar (2010) Optimization of drilling conditions of Glass fibre reinforced plastic composite material using genetic algorithm. World Journal of Engineering, 7 (2). pp. 811-812. ISSN 1708-5284

Shivakumar, . and Pai, Srinivasa P and Rao, Sriniviasa B R and Samaga, B S (2010) Performance and Emission characteristics of a 4 stroke c.i. Engine operated on honge methyl ester using Artificial neural network. ARPN Journal of Engineering and Applied Sciences, 5 (6). pp. 83-94. ISSN 1819-6608

Bhat, Chandrashekhar and Sharma , S S and Jagannath, K and Mohan, N S and Sathisha, S G (2010) Prediction of Sound Attenuation Characteristics of Mufflers. World Journal of Engineering, 7 (3). pp. 115-116. ISSN 1708-5284

K.G, Binu and Shenoy, Satish B and Rao, Srikanth D and Pai, Raghuvir B (2010) Stability characteristics of journal bearing systems lubricated with couple stress fluids using the non linear transient approach. Journal of Tribology and Surface Engineering, 3 (1&2). pp. 51-66. ISSN 1949-4866

Jagannath, K and Sharma , S S and Mohan, N S and Prabhu, P R (2010) Stir Casting Technique for low Melting point Metal Matrix Composites and Characteristic study. World Journal of Engineering, 7 (3). pp. 511-5121. ISSN 1708-5284

Sharma , S S and Prabhu, P R and Chadaga, R C (2010) Thermal treatments & characteristics study on unalloyed structural (AISI 1140) steel. World Academy of Science, Engineering and Technology, 70. pp. 770-775. ISSN 2010-3778

Sharma , S S and Jagannath, K and Mohan, N S and Bhat, Chandrashekhar and Prabhu, P R and Chadaga, R C (2010) Thermomechanical and Precipitation Hardening of Stir-Cast Silica Reinforced Aluminium alloy Matrix Composites. World Journal of Engineering, 7 (3). pp. 1007-1008. ISSN 1708-5284

Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M and Herle, Ramadev (2010) The inhibition action of ethyl-2-phenyl hydrozono-3-oxobutyrate on the corrosion of 6061 al alloy/sicp composite in hydrochloric acid medium. Journal of Chilean Chemical Society, 55 (1). ISSN 0717-9707

Pai, Srinivasa P and Pai, Asha S (2009) Knowledge Management A Transformational Paradigm for Excellence in Technical Educational Institutions: A Framework and Roadmap for Implementation. Indian Journal of Technical Education, 32 (4). ISSN 0971-3034

Shenoy, Satish B and Pai, Raghuvir B (2009) Performance Characteristics of a Misaligned Single Pad Externally Adjustable Fluid-Film Bearing. TribologyinIndustry, 31 (3 - 4). pp. 29-36. ISSN 2217-7965

Shenoy, Satish B and Pai, R S and Rao, D S and Pai, Raghuvir B (2009) Elasto-hydrodynamic lubrication analysis of full 360' journal bearing using CFD and FSI techniques. World Journal of Modelling and Simulation, 5 (4). pp. 315-320. ISSN 1746-7233

Khader, Abdul S M and Shenoy, Satish B and Pai, Raghuvir B and Mahmood, N S and Kamath, G and Rao, V R K (2009) A comparative Fluid-Structure Interaction study of stenosed and Normal Common Carotid Artery. World Journal of Modelling and Simulation, 5 (4). pp. 272-277. ISSN 1746-7233

Gautam, Pawan and Valiathan, Ashima and Adhikari, Raviraj (2009) Maxillary protraction with and without maxillary expansion: A finite element analysis of sutural stresses. American Journal of Orthodontics and Dentofacial Orthopedics. pp. 361-366. ISSN 0889-5406

Arunachala, U C and Bhatt, Siddhartha M and Sreepathi, L K (2009) Prediction, Evaluation and Prevention of Scaling in Flat Plate Solar Water Heaters. Emerging Journal on Engineering Science Technology. EJEST, 4 (7). pp. 37-53. ISSN 0974-2050

Shenoy, Satish B and Pai, Raghuvir B (2009) Stability Characteristics of an Externally Adjustable Fluid Film Bearing in the Laminar and Turbulent Regimes. Tribology International, 43 (9). pp. 1751-1759. ISSN 0301-679X

Bhatt, M Siddhartha and Sreepathi, L K and Arunachala, U C (2009) Effect of Scaling on Energy efficiency of Solar flat plate water heaters. SESI JOURNAL, 19 (1-2). ISSN 1945-9203

Gautam, Pawan and Valiathan, Ashima and Adhikari, Raviraj (2009) Skeletal response to maxillary protraction with and without maxillary expansion: A finite element study. American Journal of Orthodontics and Dentofacial Orthopedics. pp. 723-728. ISSN 0889-5406

Shenoy, Satish B and Pai, Raghuvir B (2009) Theoretical investigations on the performance of an externally adjustable fluid-film bearing including misalignment and turbulence effects. TribologyInternational, 42 (7). pp. 1088-1100. ISSN 0301-679X

Gautam, Pawan and Valiathan, Ashima and Adhikari, Raviraj (2009) Craniofacial displacement in response to varying headgear forces evaluated biomechanically with finite element analysis. American Journal of Orthodontics and Dentofacial Orthopedics. pp. 507-515. ISSN 0889-5406

Karanth, Vasudeva K and Sharma, Yagnesh N (2009) Numerical Analysis of the Whole Field Flow in a Centrifugal Fan for Performance Enhancement - The Effect of Boundary Layer Fences of Different Configurations. International Journal of Fluid Machinery and Systems, 2 (2). pp. 110-119. ISSN 1882-9554

Karanth, Vasudeva K and Sharma, Yagnesh N (2009) C F D Analysis of a Centrifugal Fan for Performance Enhancement using Converging Boundary Layer Suction Slots. World Academy of Science, Engineering and Technology, 2009 (36). pp. 381-387. ISSN 2010-3778

Karanth, Vasudeva K and Sharma, Yagnesh N (2009) CFD Analysis on the Effect of Radial Gap on Impeller-Diffuser Flow Interaction as well as on the Flow Characteristics of a Centrifugal Fan. International Journal of Rotating Machinery, 2009.

Khader, Abdul S M and Zubair, Md and Pai, Raghuvir B and Rao, V R K and Kamath, Ganesh S (2009) A Comparative Study of Transient Flow through Cerebral Aneurysms using CFD. World Academy of Science, Engineering and Technology (60). pp. 606-610. ISSN 2010-3778

Kamath , Raghavendra C and Kuttan, Appu K K (2009) Determination of Proportionality Constants from Experiments to Develop a Force Model for Reaming Process. Pacific Journal of Science and Technology, 10 (2). pp. 57-67.

Kamath , Raghavendra C and Kuttan, Appu K K (2009) Determination of proportionality constants from cutting force modelling experiments during broaching operation. Maejo International Journal of Science and Technology, 3 (2). pp. 343-351. ISSN 1905-7873

Kini, Vijaya M and Pai, Rammohan S and Rao, Srikanth D and Shenoy, Satish B and Pai, Raghuvir B (2009) Effect of groove location on the dynamic characteristics of multiple axial groove water lubricated journal bearing. Special Journal , 60 (127). pp. 736-740. ISSN 2010-3778

Shenoy, Satish B and Pai, R S and Rao, Srikanth D and Pai, Rammohan S (2009) Elasto-hydrodynamic lubrication analysis of full 360� journal bearing using CFD and FSI techniques. World Journal of Modelling and Simulation, 5 (4). pp. 315-320. ISSN 1746-7233

Shetty, Raviraj and Pai, Raghuvir B and Rao, Srikanth S (2009) Experimental Studies on Turning of Discontinuously Reinforced Aluminium Composites under Dry, Oil Water Emulsion and Steam Lubricated Conditions using TAGUCHI’s Technique. Journal of Science, 22 (1). pp. 21-32. ISSN 1303-9709

Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2009) N-benzyl-N1-phenyl Thiourea as Corrosion Inhibitor for 304SS in Hydrochloric Acid Solution. Journal of Metallurgy and Materials Science, 51 (2). ISSN 0972-4257

Sharma, Yagnesh N and Karanth, Vasudeva K (2009) Numerical Analysis of a Centrifugal Fan for Improved Performance using Splitter Vanes. World Academy of Science, Engineering and Technology, 2009 (36). pp. 453-459. ISSN 2010-3778

Karanth, Vasudeva K and Sharma, Yagnesh N (2009) Numerical analysis on the effect of varying number of diffuser vanes on impeller - diffuser flow interaction in a centrifugal fan. World Journal of Modelling and Simulation, 5 (1). pp. 63-71. ISSN 1746-7233

Shenoy, Satish B and Pai, Raghuvir B (2009) Performance Evaluation of a Single Pad Externally Adjustable Fluid Film Bearing. Australian Journal of Mechanical Engineering, 7 (2). pp. 35-46. ISSN 1448-4846

Arunachala, U C and Bhatt, Siddhartha M and Sreepathy, L K (2009) Performance analysis of solar flat plate collectors in scaling environment. Journal of CPRI,, 5 (1). pp. 109-119. ISSN 0973-0338

Shenoy, Satish B and Pai, Raghuvir B (2009) Steady State Performance Characteristics of Single Pad Externally Adjustable Fluid Film Bearing in the Laminar and Turbulent Regimes. Journal of Tribology, 131 (2). ISSN 0742-4787

Shetty, Raviraj and Pai, Raghuvir B and Rao, Srikanth S and Nayak, Rajesh (2009) Taguchi’s Technique in Machining of Metal Matrix Composites. Taguchi’s Technique in Machining of Metal Matrix Composites, 31 (1).

Vijay, Prakash and D’Souza, Mariette and Adhikari, Raviraj (2009) A comparison of stress distribution and flexion among various designs of bar attachments for implant overdentures: A three dimensional finite element analysis. Indian Journal of Dental Research, 20 (1). pp. 31-36. ISSN 0970-9290

Shetty, Raviraj and Keni, Laxmikanth and Pai, Raghuvir B and Kamath, Vasanth (2008) Experimental and analytical study on chip formation mechanism in machining of DRACs. ARPN Journal of Engineering and Applied Sciences, 3 (5). pp. 27-32. ISSN 1819-6608

Shenoy, Satish B and Pai, Raghuvir B (2008) Steady State Performance Characteristics of a Single Pad Externally Adjustable Fluid Film Bearing. Journal of Advanced Mechanical Design and Manufacturing, 2 (5). pp. 937-942. ISSN 1881-3054

Shetty, Raviraj and Keni, Laxmikanth and Pai, Raghuvir B and Rao, Srikanth S (2008) Finite element modeling of stress distribution in the cutting path in machining of discontinuously Reinforced aluminium composites. ARPN Journal of Engineering and Applied Sciences, 3 (4). pp. 25-31. ISSN 1819-6608

Shetty, Divakara S and Shetty, Prakash (2008) Inhibition of mild steel corrosion in acid media by N-benzy1-N-pheny1 thiourea. Indian Journal of Chemical Technology, 15 (3). pp. 216-220. ISSN 0971-457X

Shetty, Raviraj and Pai, Raghuvir B and Rao, Srikanth S and Kamath, Vasanth (2008) Machinability study on discontinuously reinforced aluminium Composites (DRACs) using response surface methodology and Taguchi’s design of experiments under dry cutting condition. Maejo International Journal of Science and Technology, 2 (01). pp. 227-239. ISSN 1905-7873

Shetty, Raviraj and Pai, Raghuvir B and Kamath, Vasanth and Rao, Srikanth S (2008) Study on surface roughness minimization in turning of DRACs using surface roughness methodology and taguchi under pressured steam jet approach. ARPN Journal of Engineering and Applied Sciences, 3 (1). pp. 59-67. ISSN 1819-6608

Shetty, Raviraj and Pai, Raghuvir B and Rao, Srikanth S (2008) Tribological studies on discontinuously reinforced aluminum composites based on the orthogonal arrays. ARPN Journal of Engineering and Applied Sciences, 3 (1). pp. 84-92. ISSN 1819-6608

Bhat, Chandrashekhar and Bhat, M R and Murthy, C R L (2008) Characterization of Failure modes in CPRP Composites - An ANN Approach. Journal of Composite Materials, 42 (3). pp. 257-276.

Pai, Rammohan S and Pai, Raghuvir B (2008) Stability of four-axial and six-axial grooved water-lubricated journal bearings under dynamic load. Proceedings of International Mechanical Engineering, 222 (J4). pp. 683-691.

Shetty, Raviraj and Pai, Raghuvir B and Kamath, Vasanth and Rao, Srikanth S (2008) Steam as coolant and lubricant in turning of metal matrix composites. Journal of Zhejiang University Science A , 9 (9). pp. 1245-1250. ISSN 1862-1775

Jagannath, K and Raghunandana, K and Chincholkar, A M (2007) Performance Characteristics of Two Lobe Bearings Operating with Non Newtonian Lubricants. Journal of Solid Mechanics and Materials Engineering, 1 (4). pp. 421-430. ISSN 1880 – 9871

Shetty, Divakara S and Shetty, Prakash and Nayak, Sudhaker H V (2007) The inhibition action of N-(furfuryl)-N′-phenyl thiourea on the corrosion of mild steel in hydrochloric acid medium. Materials Letters, 61 (11-12). pp. 2347-2349. ISSN 0167-577X

Bhat, Praveen and Shenoy, Satish B and Pai, Raghuvir B (2007) Elasto-Hydrodynamic lubrication analysis of partial arc bearings using CFD & FSI. Technologiâ Inovativâ, Revista Constructia de Masini, 53 (4). pp. 109-112. ISSN 0573-7419 (Submitted)

Jagannath, K and Raghunandana, K and Chincholkar, A M (2007) Performance Characteristics of Two-Lobe bearings operating with non-Newtonian Lubricants. Journal of Solid Mechanics and Materials Engineering, 1 (4). pp. 421-430. ISSN 1880 – 9871

Anjaiah, D and Shetty, Raviraj and Pai, Raghuvir B and Kini, Vijaya M and Rao, S S (2007) A pressured steam jet approach to tool wear minimization in cutting of metal matrix composites. Materials Science Forum, 561. pp. 643-646. ISSN 1662-9752

Jagannath, K and Raghunandana, K and Chincholkar, A M (2006) Performance Characteristics of two lobe bearings operating with non- Newtonian Lubricants. Journal of Solid Mechanics and Materials Engineering. pp. 421-430. ISSN 1880 – 9871

Shetty, Divakara S and Shetty, Prakash and Nayak, Sudhakar H V (2006) Inhibition of Mildsteel Corrosion in Acid Media By N-(2-Thiophenyl)-N-Phenyl Thiourea. Journal of the Chilean Chemical Society, 51 (2). pp. 849-854. ISSN 0717-9707

Mohan, N S and Kulkarni, S M and Ramachandran, Amar (2006) Optimization of process parameters during Drilling of glass-fiber polyester reinforced Composites using doe and anova. IIUM Engineering Journal, 7 (1). pp. 13-24. ISSN 1511-788X

Rodrigues, Lewlyn L R and Dharmaraj, N (2006) System dynamics approach for change management in new product development. Management Research News, 29 (8). pp. 512-523. ISSN 0140-9174

Shetty, Divakara S and Shetty, Prakash and Nayak, Sudhaker H V (2006) The inhibition action of N-(furfuryl)-N'-phenyl thiourea on the corrosion of mild stell in acid media. Journal of the Serbian Chemical Society, 71 (10). pp. 1073-1082. ISSN 1820-7421

Pai, Srinivasa and Pai, Asha S (2005) A general framework for knowledge management in an educational institution. Journal of Engineering Education, 19 (2). ISSN 0971-5843

Shetty, Divakara S and Shetty, Prakash and Nayak, Sudhaker H V (2005) Inhibition of Corrosion of mild steel in hydrochloric acid by N-cyclohexy1-N-pheny1 thiourea. Indian Journal of Chemical Technology , 12 (4). pp. 462-465. ISSN 0971-457X

Shetty, Prakash and Shetty, Divakara S and Nayak, Sudhakar H V (2005) Inhibition of corrosion of mild steel in hydrochloric acid by N-cyclohexyl-N/- phenyl thiourea. Indian Journal of Chemical Technology, 12. pp. 462-465. ISSN 0971-457X

Rodrigues, Lewlyn L R and Chincholkar, A M (2005) Benchmarking the HR practices of an engineering institute with public sector industry for performance enhancement. International Journal of Training and Development, 9 (1). pp. 6-20. ISSN 1360-3736

Mohan, N S and Kulkarni, S M and Ramachandran, Amar (2005) Delamination analysis in drilling process of glass fiber reinforced plastic (GFRP) composite materials. Journal of Materials Processing Technology, 186. pp. 265-271.

Mohan, N S and Ramachandran, Amar and Kulkarni, S M (2005) Influence of process parameters on cutting force and torque during drilling of glass–fiber polyester reinforced composites. Composite Structures, 71. pp. 407-413.

Mohan, N S and Ramachandran, Amar and Kulkarni, S M (2005) Machining of Fiber-reinforced Thermoplastics: Influence of Feed and Drill Size on Thrust Force and Torque during Drilling. Journal of Reinforced Plastics and Composites. pp. 1-12.

Jagannath, K and Raghunandana, K and Chincholkar, A M (2004) Thermo hydrodynamic Analysis of steadily Loaded Journal Bearings. Journal of The Institution of Engineer (India) , 85. pp. 131-137. ISSN 0020 – 3408

Jagannath, K and Raghunandana, K and Chincholkar, A M (2004) Thermodynamic analysis of Steadily loaded Journal Bearings. Journal of the Institution of Engineers (India) Mechanical Engineering Division, 85. pp. 131-137. ISSN 0020-3408

Sharma, Yagnesh N and Som, S K (2004) Influence of fuel volatility and spray parameters on combustion characteristics and NOx emission in a gas turbine combustor. Applied Thermal Engineering, 24. pp. 885-903. ISSN 1359-4311

Raghunandana, K and Majumdar, B C and Maiti, R (2003) Stability of Flexibly Supported Oil Journal Bearings Using Non – Newtonian Lubricants: Comparison of Linear & Non – Linear Analysis. Journal of Tribology, 2 (1). pp. 1-6. ISSN 0742-4787

Bhat, Chandrashekhar and Bhat, M R and Murthy, C R L (2003) Acoustic emission characterization of failure modes in composites with ANN. Composite Structures, 61. pp. 213-220.

Raghunandana, K and Majumdar, B C and Maiti, R (2001) Stability of Flexibly Supported Oil Journal Bearings Using Non-Newtonian Lubricants: Linear Perturbation Analysis. Journal of Tribology, 123. pp. 651-654. ISSN 0742-4787

Raghunandana, K and Majumdar, B C (1999) Stability of journal bearing systems using non-Newtonian lubricants: a non-linear transient analysis. Tribology International, 32. pp. 179-184.

Sharma , S S (1997) Thermomechanical Treatmentof Al-Zn-Mg Alloys and Comparison with Conventtional age Hardening. Aluminium India, 14 (2). pp. 22-23.

Nair, Moorthy M and Shetty, Nagaraj and Shetty, Divakara S and Suvarna, Ashwin Harish and Mehafooz, Mohiyuddin Development and Comparison of Mechanical Properties of Uni-Directional E-Glass/Epoxy Composite with Coal Ash as Filler. Indian Journal of Science and Technology, 9 (37). ISSN 0974-6846

Pai, Srinath and Shettigara, Akshath and Sharief, Abdul and Shivakumar, . and Shreeprakash, B Effect of Injection Timing on Performance and Emission of a Direct Injection Diesel Engine Fueled with Simarouba Biodiesel blend. International Journal of Engineering Trends and Technology, 40. pp. 312-317. ISSN 2231-5381

Kini, Chandrakant R and Kamat, Harishkumar and Shenoy, Satish B Effect of Twisted Tape Inserts and Stacks on Internal Cooling of Gas Turbine Blades. Indian Journal of Science and Technology, 9 (31). ISSN 0974-6846

Conference or Workshop Item

Vikas, Ramakrishna S and Nayak, Suhas Y and Heckadka, Srinivas Shenoy and Goyal, Sahil (2017) Effect of low temperature thermo mechanical treatment on the wear characteristics of aa6061. In: International Conference on Mechanical and Aeronautical Engineering, 18/01/2017, Bangkok, Thailand.

Kamat, Harishkumar and Kini, Chandrakant R and Sharma, Yagnesh N (2017) FSI Analysis of trailing edge region cooling in hp stage turbine blade. In: International conference on mechanical and aeronautical engineering, 18/01/2017, Bangkok, Thailand, Jan 18-19, 2017.

Murthy, Amar A and Raghunandana, K (2017) Study of Dimple Effect on the Friction Characteristics of a Journal Bearing using Taguchi Method. In: International Conference on Advances in Metallurgy, Materials and Manufacturing, 06/03/2017, Hotel CJ Pallajio Salem.

Gowri Shankar, M C and Kini, Achutha U and Sharma, S S (2017) Tensile Fractography of Artificially Aged Al6061-B4C Composites. In: International conference on mechanical and aeronautical engineering, 18/01/2017, Bangkok, Thailand, Jan 18-19, 2017.

Sharma, S S and Gowri Shankar, M C and Kini, Achutha U and Jagannath, K and Prabhu, P R (2016) Aging and Mechanical Characteristics of Precipitation Hardening Stir cast Al6061 Hybrid Composite. In: International multidisciplinary research conference, 02/02/2016, Colombo.

Shahabaz, M and Kumar, Rakesh and Shetty, Nagaraj and Sharma, S S (2016) Analysis of Delamination in Carbon Fibre Reinforced Polymer Composite using Finite Element Method. In: nternational Conference on Emerging Trends in Engineering, 12/05/2016, NMAM Institute of Techonology, Nitte, Udupi Distri.

Kumar, Shiva (2016) Application of Design of Experiments for Optimization of Thermal Parameters in a Double Pipe Heat Exchanger with a Passive Device. In: International Conference on Computational methods in engineering and health sciences (ICCMEH), 17/12/2016, Kyushu Institute of technology , Japan.

Shettigar, Arun Kumar and Prabhu, Subramanya R B and Malghan, Rashmi L and Rao, Srikantha and Herbert, Mervin A (2016) Application of Neural Network for the Prediction of Tensile Properties of Friction Stir Welded Composites. In: Asia Conference on Mechanical and Materials Engineering, 14/07/2016, Malaysia.

Karanth, Vasudeva K and Shreyansh, . and Manjunath, M S (2016) CFD Analysis of a Solar Air Heater with Deflector Plate for Heat Transfer Enhancement. In: Multidisciplinary Research, 02/02/2016, Colombo, Srilanka.

Arunkumar, H S and Ganesha, A and Shettar, Manjunath and Hiremath, Pavan (2016) Cfd analysis on solar chimney for power generation application. In: International Conference on Emerging Trends in Engineering and Managgement Research, 23/03/2016, Brahma Valley college of Engineering, Nashik.

Joshi, Mukund and Shetty, Nagaraj and Bharath, N L S and Surapaneni, Chanakya Varma (2016) Comparative evaluation of additive manufacturing processes. In: International Conference on Advanced Materials and Technology, 26th – 28th May 2016, Sri Jayachamarajendra College of Engineering, Mysuru, India.

Nayak, Suhas Y and Prabhu, Aruna and Harsha, R and Haravind, B.S.V.R (2016) Comparison of Corrosion Behavior between A6063/Al2O3 and AA6082/Al2O3 Composites at Marine Conditions. In: International Conference On Emerging Trends in Engineering and Technology, 29/05/2016, Bengaluru.

Pai, Raghuvir B and Girish, H (2016) Condition Monitoring of Cooling Tower Fans Using the Envelope Technique. In: International Conference on Mechanics, Materials and Structural Engineering.

Vinyas, . and Upadhyaya, Y S and Sridhara, B K (2016) Damage Based Fatigue Life Prediction of AISI 1040 Steel. In: International Conference & Exhibition on Fatigue, Durability and Fracture Mechanics & Symposium on Condition Assessment/Residual Life Assessment & Extension, 28/09/2016, J N Tata Auditorium, IISc, Bangalore.

Murthy, Amar A and Rakesh, L and Gurumurthy, B M and Hattangady, Vikram Harin and Puri, Suneet Singh (2016) Development of Cost Effective Chassis Dynamometer for Engine Output Power Measurements. In: International Conference on Advances in Mechanical and Robotics Engineering, june 12th 2014, Institute of Research Engineers and Doctors, Malys.

Jagannath, K and Sharma, S S and Prabhu, P R and Gowri Shankar, M C and Harisha, S R (2016) Effect of Artificial aging on Fracture behavior of Al6061- Silica (SiO2) composites. In: 4th Asia conference on Mechanical and Materials Engineering, 14/07/2016, Kuala Lumpur, Malaysia.

Madhwesh, N and Karanth, Vasudeva K and Manjunath, M S (2016) Effect of Notched Trapezoidal Rib Turbulators on Heat Transfer in a Flat Plate Solar Air Heater-A CFD Study. In: International multidisciplinary research conference, 02/02/2016, Colombo.

Kini, Achutha U and Sharma, S S and Jagannath, K (2016) Effect of the Process Parameters on Build Time in Fused Deposition Modeling using Taguchi Method. In: International multidisciplinary research conference, 02/02/2016, Colombo.

Gowri Shankar, M C and Sharma, S S and Kini, Achutha U (2016) Enhancement in Hardness and Influence of Artificial Aging on Stir Cast Al6061-B4C and Al6061-SiC Composites. In: International Conference on Advanced Materials and Applications (ICAMA 2016), 15/06/2016, BMSCE, BANGLORE.

Shivaprakash, Y M and Gowri Shankar, M C and Sharma, S S and Prasad, Sreenivasa K V (2016) Experimental Studies on Grey Cast Iron Reinforced AA6061 Composite. In: Proceedings of 53rd The IIER International Conference, 10/01/2016, Kuala Lumpur, Malaysia.

Kamath, Tanmay R and Upadhyaya, Y S and Kaushik, Deepak (2016) Fatigue of Aluminum Alloys using Continuum Damage Mechanics: A Review. In: National Conference on Mechanical Engineering, Material Science and Mechatronics, 19/03/2016, Vishwakarma Institute of Information Technology, P.

Devraj, Ashwin Kumar and Adhikari, Raviraj and Acharya, Kiran KV and Abhishek, S and Shetty, Adarsh R (2016) Finite Element Analysis of a Human Knee Joint. In: Finite Element Analysis of a Human Knee Joint, 30/08/2016, Bangalore.

Harisha, S R and Sharma, S S and Kini, Achutha U (2016) Influence of Spheroidizing Heat Treatment on Mechanical Properties of EN47 Steel. In: ACCME 2016, 14/07/2016, Kuala Lumpur, Malaysia.

Hiremath, Pavan and Arunkumar, H S and Shettar, Manjunath (2016) Investigation on Effect of Aluminium Hydroxide on Mechanical and Fire Retardant Properties of GFRP- Hybrid Composites. In: Advanced Materials, Manufacturing, Management and Thermal Science, 23/09/2016, SIT, Tumkur.

Hiremath, Pavan and Shettar, Manjunath and Arunkumar, H S (2016) Investigation on Effect of Egg Shell Powder on Mechanical Properties of GFRP Composites. In: International Conference on Advanced Materials and Applications (ICAMA 2016), 15/06/2016, BMSCE, BANGLORE.

Gurumurthy, B M and Sharma, S S and Gowri Shankar, M C and Kini, Achutha U and Shivaprakash, Y M (2016) Mechanical Characteristics Evaluation of Conventional and Special Hardening Treatments on AISI 4340 Steel. In: international conference on current research in Mechanical, Mechatronics, Robotics and Civil Engineering, 16/12/2016, singapore.

Hindi, Jamaluddin and Kini, Achutha U and Sharma, S S (2016) Mechanical chararcterisation of stircast aluminium 7075 matrix reinforced with grey cast iron & fly ash. In: Proceedings of ISER 29th International Conference, 22/04/2016, Dubai, UAE,.

Sharma, S S and Jagannath, K and Prabhu, P R and Gowri Shankar, M C and Harisha, S R and Kini, Achutha U (2016) Metallography & Bulk Hardness of Artificially Aged Al6061-B4C-SiC Stir Cast Hybrid Composites. In: 4th Asia conference on Mechanical and Materials Engineering, 14/07/2016, Kuala Lumpur, Malaysia.

Gowri Shankar, M C and Sharma, S S and Kini, Achutha U (2016) Microstructure and Fracture behavior of two stage stir cast Al6061-SiC composites. In: Manipal Research Colloquium, Manipal, 04/04/2016, Manipal.

Deepak, D and Rajendra, Beedu (2016) Multi Response Optimization of Process Parameters Using Grey Relational Analysis for Turning of AI-6061. In: International Conference on Advanced Material Technologies, 27/12/2016, Dadi Institute of Engineering & Technology.

Murthy, Krishna and Vijay, G S and Rao, Srinivasa B R (2016) NOx Prediction in a Dual fuel CI Engine. In: International multidisciplinary research conference, 02/02/2016, Colombo.

Kumar, Nithesh and Pai, Raghuvir B and Khader, Abdul S M and Kyriacou, P A (2016) Non – Newtonian Study of Blood Flow in Arteries. In: International Conference on Computational methods in engineering and health sciences (ICCMEH), 17/12/2016, Kyushu Institute of technology , Japan.

Manjunath, M S and Chatti, Adnena and Kohler, Saskia (2016) Numerical Analysis of Flat Plate Solar Air Heater with Transverse Notched Rib Turbulators for Heat Transfer Enhancement. In: International multidisciplinary research conference, 02/02/2016, Colombo.

Mehta, Darshan Bhavesh and Arunkumar, H S and Hiremath, Pavan and Shettar, Manjunath (2016) Numerical Analysis on Effect of Chimney Height on Solar Updraft Power Plant. In: International Conference on Global Technology Initiatives, 29/03/2016, Rizvi College of Engineering,Bandra west,Mumbai.

Shetty, Pradeep Kumar and Shetty, Raviraj and Rodrigues, Lewlyn L R (2016) Optimizing a production system using tools of total productive maintenance. In: International Conference on Mechanical & Automobile engineering, 14/12/2016, PAATAYA-THAILAND.

Pai, Raghuvir B and Shenoy, Satish B and Kini, Vijaya M (2016) Performance Evaluation of Labyrinth Seals. In: EDF Pprime Workshop 'Wear and Life Time of Seals', 06/10/2016, Universite De Poitiers,Poitiers, France.

Jagannath, K and Gupta, Archith and Sharma, S S and Kini, Achutha U (2016) Performance enhancement of refrigerator with de-superheater. In: International multidisciplinary research conference, 02/02/2016, Colombo.

Srinivas, G and Raghunandana, K and Shenoy, Satish B (2016) Recent Developments of Axial Flow Compressors Under Transonic flow Conditions. In: International Conference on Frontiers in Automobile and Mechanical Engineering, 17/06/2016, Sathyabama University, Chennai.

Harisha, S R and Sharma, S S and Kini, Achutha U (2016) Spheroidizing and Hardness related Properties of AISI6150 Spring Steel. In: International multidisciplinary research conference, 02/02/2016, Colombo.

Nair, Moothy M and Kamath, Shambhavi M and Shetty, Nagaraj (2016) Study on Distilled/Sea Water Absorption Behaviour Influenced by Non-Uniform Long Piled up Coir Fiber Composites. In: International Conference on Emerging Trends in Engineering, 12th and 13th May 2013, NITTE Karnataka.

Bhat, Subraya Krishna and Deshpande, Raghavendra and Beck, Peter and Hegde, Sudarshan (2016) Study on Effect of Thermo-Structural loading on the PCB during Selective Soldering process using Finite Element Method. In: International Conference on Electronics Packaging, 20/04/2016, Sapporo Education and Culture Hall, Hokkaido,Japan.

Shettar, Manjunath and Kini, Achutha U and Sharma, S S and Hiremath, Pavan (2016) Study on Mechanical Characteristics of Nanoclay Reinforced Polymer Composites. In: Advanced Materials, Manufacturing, Management and Thermal Science, 23/09/2016, SIT, Tumkur.

Shetty, Nagaraj and Kamath, Shambhavi M and Nair, Moorthy M (2016) Study on Tensile and Hardness Behaviour of Sawdust Impregnated on Short Coir Fiber Reinforced Epoxy Composite. In: International Conference on Advanced Materials and Technology, 26th – 28th May 2016, Sri Jayachamarajendra College of Engineering, Mysuru, India.

Prabhu, Raghavendra and Sharma, S S and Jagannath, K and kumar, krishna P (2016) Surface Improvement of Shafts by Turn-Assisted Deep Cold Rolling Process. In: 4th Asia conference on Mechanical and Materials Engineering, 14/07/2016, Kuala Lumpur, Malaysia.

Rao, Vittala C and Dinesh, K R and Algur, Veerabhadrappa and Shettar, Manjunath (2016) Taguchi’s orthogonal array approach to evaluate drilling of GFRP particulate composites. In: Advanced Materials, Manufacturing, Management and Thermal Science, 23/09/2016, SIT, Tumkur.

Arunkumar, H S and Mangrulkar, Chidanand and Ikhar, Rahul and Gohil, Trushar B (2016) Two - Dimensional Study of Cylinder Wake Interaction with the Flat Plate Boundary Layer withm RANS Modeling. In: International and 43 rd National Conference on Fluid Mechanics and Fluid Power, 15/12/2016, MNNITA, Allahabad, U.P., India.

Naik, Nithesh and Shettar, Manjunath and Bhat, Ritesh R and Kowshik, Suhas C S (2016) Waste management analysis in trains using anaerobic bio digester. In: Proceedings of the IRES 29th International Conference, 20th Feb 2016, Singapore.

Harisha, S R and Sharma, S S and Kini, Achutha U and Nayak, Siddharth P and Saika, Arnav (2015) Investigation on Spheroidizing Annealing Heat Treatment on Mechanical Properties of EN24 Steel. In: National Conference on Emerging Trends in Mechanical Engineering, September 23, 2015, VVCE, Mysuru.

Gurumurthy, B M and Murthy, Amar A and Hindi, Jamaluddin and Sharma , S S and Kini, Achutha U (2015) Characteristics Evaluation of Normalized and Conventionally Hardened AISI 4340 steel. In: 5th International Conference on Automotive, Mechanical and Materials Engineering, August 16-17, 2015, Bali (Indonesia).

Gowri Shankar , M C and Kini, Achutha U and Sharma , S S and Prabhu, P R (2015) Effect of SiC particulate reinforcement on the precipitation hardening behavior of two step stir cast Al 6061 alloy. In: International Conference on Emerging Trends in Mechanical & Industrial Engineering, JULY 18, 2015, ITM University, Gurgaon, Haryana.

Nayak, Rajesh and Shetty, Raviraj (2015) Impact of Process Parameters on Surface Roughness in Elastomer Machining. In: International Conference on Emerging Trends in Mechanical & Industrial Engineering, JULY 18, 2015, ITM University, Gurgaon, Haryana.

Gowri Shankar , M C and Kini, Achutha U and Sharma , S S and Prabhu, P R (2015) Influence of aging temperature and aging time on the mechanical property and microstructure during precipitation hardening of Al 6061 alloy. In: International Conference on Emerging Trends in Mechanical & Industrial Engineering, JULY 18, 2015, ITM University, Gurgaon, Haryana.

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K and Kini, Achutha U (2015) Analysis of Surface Hardness, Surface Roughness and Near Surface Microstructure of AISI 4140 Steel Worked with Turn-Assisted Deep Cold Rolling Process. In: International Conference on Mechanical, Aeronautical and Manufacturing Engineering, June 4-5, 2015, New York, USA.

Kini, Achutha U and Sharma , S S and Jagannath, K and Prabhu, P R and Gowri Shankar , M C (2015) Characterization Study of Aluminium 6061 Hybrid Composite. In: International Conference on Mechanical,Aeronautical and Manufacturing Engineering, June, 4-5, 2015, New York, USA.

Jagannath, K and Kotian, Akhilesh and Sharma , S S and Kini, Achutha U and Prabhu, P R (2015) Investigation of Bubble Growth During Nucleate Boiling Using CFD. In: International Conference on Mechanical,Aeronautical and Manufacturing Engineering, June, 4-5, 2015, New York, USA.

Preetham, S and Sharma , S S and Gowri Shankar , M C (2015) Deformation assisted Heat treatment and Tensile related properties on Al 6061 alloy. In: National Conference on Frontiers in Mechanical Engineering, 29th April 2015, Canara Engineering College Mangalore.

Nagaraja, M R and Lobo, Prinster Jason and Sharma , S S and Kini, Achutha U and Chadaga, RajGopal P (2015) Effect of Precipitation Hardening and Deformation Aided Aging Treatment on Simple and Hybrid Aluminium Alloy Composites. In: National Conference on Frontiers in Mechanical Engineering, 29th April 2015, Canara Engineering College Mangalore.

John, Jithu C and Sharma , S S and Paious, Melvin (2015) Effect of Solutionizing, Artificial Ageing and Thermo Mechanical Treatment (TMT) on Hardness and Toughness of Al 6XXX Alloy. In: National Conference on Frontiers in Mechanical Engineering, 29th April 2015, Canara Engineering College Mangalore.

Mathew, Shijin and Sharma , S S and Chadaga, RajGopal P (2015) Effect of heat treatment on mechanical properties of cold rolled structural steel. In: National Conference on Frontiers in Mechanical Engineering, 29th April 2015, Canara Engineering College Mangalore.

Paious, Melvin and Sharma , S S and John, Jithu C (2015) Homogenize Annealing Effect on Mechanical Properties of Stir Cast Silicon Carbide Powder Reinforced Aluminium Alloy Metal Matrix Composite. In: National Conference on Frontiers in Mechanical Engineering, 29th April 2015, Canara Engineering College Mangalore.

Nayak, Suhas Y and Shenoy, Srinivas H and Agarwal, Sumit (2015) Tensile and Penetration Behaviour of Glass Fibre Reinforced Polymer Composites. In: International Conference On Engineering and Technology, March 17, 18 2015, Colombo, Srilanka.

Shenoy, Srinivas H and Nayak, Suhas Y and Gupta, Yash Vardhana and Chowgule, Revati and Bharadwaj, Kapil B (2015) Analysis of a forming press for composite panel fabrication. In: National Conference on Energy and Manufacturing Scenario, March 14th 2015, Punalkulam.

Nayak, Arvind and Irani, Azalea and Manjunath, M S (2015) CFD Analysis of Jet Plate Solar Air Heater for Heat Transfer Enhancement. In: International Conference on Current Advances in engineering and Technology, 08/11/2015, Pune.

Vijay, G S and Patil, Vijay M and Kumar, H S and Vishwash, B (2015) Comparison of Dimensionality Reduction Techniques for Effective Fault Diagnosis of Rolling Element Bearing. In: International Conference on Emerging Trends in Engineering (ICETE-15), 8th – 9th May, 2015, NMAM Institute of Technology, Nitte.

Vikas, Ramakrishna S and Sharma, S S and Shenoy, Vishal P and Krishna, Navaneetha V and Ghosh, Devpriyo (2015) Effect of low temperature thermomechanical Treatment on the hardness and tensile Properties of aa6061. In: Proceedings of International Conference on Mechanical Engineering and Industrial Automation, 21-22, No v, 2015,, Dubai.

Prabhu, Subramanya R B and Shettigar, Arun Kumar and Rao, Karthik M C and Nigalye, Akshay and Herbert, Mervin A and Rao, Srikanth S (2015) Effect of process parameters on tensile strength of friction stir welded Al-Cu-Mg-Si-SiCp composite. In: International Conference on Science, engineering and Technology, 21/11/2015, Ras Al Khaimah, UAE Dubai.

Sharma , S S and Prabhu, P R and Jagannath, K and Kini, Achutha U and Gowri Shankar , M C (2015) Enhancement of Hardness Related Properties of Grey Cast Iron Powder Reinforced AA7075 Metal Matrix Composites through T6 and T8 Heat Treatments. In: International Conference on Mechanical, Aeronautical and Manufacturing Engineering, June 4-5, 2015, New York, USA.

Shettar, Manjunath and Hiremath, Pavan and Mohan, N S and Chauhan, Vithal Rao and Nikhil, R (2015) Fabrication and Experimental Study of Mechanical Properties of GFRP with Cement as Filler Material for Fishing Boat Application. In: 4th World Conference on Applied Sciences, Engineering & Technology, 24-26 October 2015, Kumamoto University, Japan.

Augustine, Nevin and Santhosh, M and Ramesh, T and Kapil, Sadani (2015) Finite element analysis of a thermally actuated biocompatible stainless steel 316 microgripper for microassembly and bio-applications. In: 2nd international conference on Microelectronics, Circuits and systems, July, 11st -12th, 2015, Hotel Peerless INN, Dharmatala,Kolkata, West Bengal, India..

Shenoy, Srinivas H and Nayak, Suhas Y and Vikas, Ramakrishna S and Shenoy, Vishal P and Vernekar, Navaneet Krishna (2015) Flexural Strength Analysis Of Areca Frond Reinforced Starch Based Composites By Taguchi Method. In: National Conference on Emerging Trends in Mechanical Engineering, 7th and 8th Aug, 2015, St Joseph Engineering College – Vamanjoor, Mangaluru.

Mohan, N S and Shettar, Manjunath and Hiremath, Pavan (2015) Influence of Drilling Conditions of Glass Fiber-Reinforced Plastic [GFRP] Composite Materials. In: 4th World Conference on Applied Sciences, Engineering & Technology, 24-26 October 2015, Kumamoto University, Japan.

Shenoy, Srinivas H and Nayak, Suhas Y and Prakash, Ayush and Awasti, Ankit and Kochhar, Rishabh Singh (2015) Interlaminar shear and flexural properties of E-glass/jute reinforced polymer matrix Composites. In: Proceedings of International Conference on Mechanical Engineering and Industrial Automation, 21-22, No v, 2015,, Dubai.

Herbert, Mervin A and Shettigar, Arun Kumar and Nigalye, Akshay and Rao, Srikanth S (2015) Investigation on microstructure and mechanical properties of Friction Stir Welded AA6061-4.5Cu-10SiC composite. In: iMEC-APCOMS 2015, 12/11/2015, Swiss-Garden Hotel Kuala Lumpur.

Herbert, Mervin A and Shettigar, Arun Kumar and Nigalye, Akshay V and Rao, Shrikantha S (2015) Investigation on microstructure and mechanical properties of Friction Stir Welded AA6061-4.5Cu-10SiC composite. In: iMEC-APCOMS 2015, 12/11/2015, Swiss-Garden Hotel Kuala Lumpur.

Hindi, Jamaluddin and Kini, Achutha U and Sharma , S S and Gurumurthy, B M and Gowri Shankar , M C (2015) Mechanical Characterization of Stir Cast Al 6063 Matrix SiC Reinforced Metal Matrix Composites. In: 5th International Conference on Automotive, Mechanical and Materials Engineering, August 16-17, 2015, Bali (Indonesia).

Shetty, Nagaraj and Shetty, Divakara S and Krishna Kumar, P and Vijay, G S (2015) Mechanical characterization of uni-directional carbon fiber reinforced polymer composite. In: 2nd International Conference on Computational methods in engineering and health sciences (ICCMEH), 18/12/2015, University of Putra Malaysia, Malaysia.

Singh, Prabhpreet Data and Shetty, Nagaraj (2015) New conceptual design of solar powered aircraft. In: Proceedings of International Conference on Mechanical and Aeronautical Engineering, July 15-16, 2015, Singapore.

Arunachala, U C and Ambuj, B and Eklavya, S and Vinay, J R (2015) Performance Investigation of a Shell and Tube Heat Exchanger Using Water Based Al2O3 as a Nanofluid. In: World Conference on Applied Sciences, Engineering & Technology, 24-26 October 2015,, Kumamoto University, Japan.

Bhat, Ritesh R and kumar, Atul and Moni, Pushkar and Kumar, Sourabh (2015) Repurposing the Tin-Lead Solder Scrap Generated in an Educational Institute. In: 4th World Conference on Applied Sciences, Engineering & Technology, 24-26 October 2015, Kumamoto University, Japan.

Harisha, S R and Gowda, Thamme C S and Prabhu, Subramanya R B (2015) Study and Characterization of Magneto Rheological Fluid Damper for vibration Isolation using LabView. In: Proceedings of international conference on International Conference on Engineering and Technology, 29th March-2015 , Panjim, Goa. .

Prabhu, P R and Sharma , S S and Kulkarni, S M and Gowri Shankar , M C (2015) Turn-assisted Deep Cold Rolling: An Innovative Manufacturing Method for the improvement of fatigue life. In: International Conference on Emerging Trends in Mechanical & Industrial Engineering, JULY 18, 2015, ITM University, Gurgaon, Haryana.

Nayak, Suhas Y and Shenoy, Srinivas H and Sharma, Pratul and Aman, Iqbal and Dey, Sukanta (2015) Use of egg shell particulate as fillers in E-glass/epoxy composites. In: Proceedings of International Conference on Mechanical Engineering and Industrial Automation, 21-22, No v, 2015,, Dubai.

Harisha, S R and Gowda, Thamme C S and Sarika, Arnav (2015) A predictive work on prospect and current status on Energy for domestic application with the Improvement towards Solar Energy. In: Proceedings of international conference on Emerging Trends in Engineering , 8th -9th May-2015 , N.M.A.M.I.T., Nitte.

Pawlik, Mateusz and Baliga, Ravishanker B and Shenoy, Satish B and Pai, Raghuvir B (2014) Comparative approach to knee endoprosthesis stem materials –static analysis of bone-implant system by the means of FEM. In: Proceedings of International Conference on compputational Methods in Engineering and Health Sciences, December 17-19 ,2014, Manipal.

Pawlik, Mateusz and Baliga, Ravishanker B and Shenoy, Satish B and Pai, Raghuvir B (2014) Comparative static analysis of knee endoprosthesis implants for shor and long stem lengths by the means of FEB. In: Proceedings of International conference on Computational Methods in Engineering and Health Sciences, December 17-19 2014, Manipal.

Sharma , S S and Jagannath, K and Bhat, Chandrashekhar and Kini, Achutha U and Prabhu, P R and Jayashree, P K and Gowrishankar, M C (2014) Age Hardening and Cold Deformation Assisted Aging Treatment on the Characteristics of Quartz Powder Reinforced Stir-Cast Aluminium-Zinc Alloy Metal Matrix Composites. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Kini, Achutha U and Sharma , S S and Jagannath, K and Prabhu, P R and Bhat, Chandrashekhar and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2014) Comparative Study of EPHO and CBTC as Corrosion Inhibitors for 15 vol. % 6061 al Alloy/SiCp Composite in 1 M Hydrochloric Acid Medium. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Prabhu, P R and Sharma , S S and Jagannath, K and Gowrishankar, M C and Kini, Achutha U and Kulkarni, S M (2014) Design of Experiment Based Approach to Optimize Turn-Assisted Deep Cold Rolling Process Parameters. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Gowri Shankar , M C and Shravan, * and Rakesh, * and Rahul, * and Kini, Achutha U and Sharma , S S (2014) Effect of Artificial Aging on Strength and Wear Behaviour of Solutionized Aluminium 6061 Alloy. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Gowri Shankar , M C and Jayashree, P K and Kini, Achutha U and Sharma , S S (2014) Effect of silicon oxide (SIO2) reinforced Particles on ageing behavior of AI-2024 Alloy. In: 2nd International Conference on Current Trends in Engineering and Management (ICCTEM-2014), 17-19, Mysore.

Jagannath, K and Sharma , S S and Bhat, Chandrashekhar and Kini, Achutha U and Prabhu, Raghavendra B and Agarwal, Manish (2014) Energy Efficient Liquid Desiccant Cooling Systems. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Nayak, Rajesh and Shetty, Raviraj and Shetty, Sawan (2014) Investigation of Cutting Force in Elastomer Machining under Ambient and Cryogenic Conditions Using Response Surface Methodology. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Bhat, Chandrashekhar and Sharma , S S and Jagannath, K and Kini, Achutha U and Pandey, Sunil Kumar and Saravana, Venkatesh and Kumar, Praveen K S (2014) Waste Heat Recovery System for a Heavy Duty Six Cylinder Engine. In: 3rd World Conference on Applied Science, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Jagannath, K and Sharma , S S and Kini, Achutha U and Prabhu, P R and Manjesh, B (2014) Analysis of Cryogenic assisted Ammonia-water power Cycle. In: 2nd International Conference on Current Trends in Engineering and Management (ICCTEM-2014), 17-19, Mysore.

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K (2014) Surface layer alterations in AISI 4140 Steel from turn-assisted deep cold rolling process. In: Second international conference on Current Trends in Engineering and Management ICCTEM-2014, 17-19 July 2014, Vidyavardhaka College of Engineering, Mysore.

Nayak, Rajesh and Shetty, Raviraj (2014) Cutting force and surface roughness in cryogenic nachining of elastomer. In: Proceedings of the 2nd International Conference on Current Trends in Engineering and Management, 17 – 19, July 2014,, Mysore, Karnataka, India.

Sharma , S S and Prabhu, P R and Gowri Shankar , M C and Sudhakar, A V B (2014) Mechanical Property Assessment of Austempered and Conventionally Hardened AISI 4340 Steel. In: Second international conference on Current Trends in Engineering and Management ICCTEM-2014, 17-19 July 2014, Vidyavardhaka College of Engineering, Mysore.

Sudarshan, Yashasvini and Gangadhar, N.H and Nagaraja, . (2014) A Case Study on the Determination of Optimal Angle of Mounting of Solar Collector on Balconies of High-Rise Apartments. In: International conference on recent trends in Engg. & Tech, Jan 18-19, Cochin.

Pawlik, Mateusz and Baliga, Ravishanker B and Shenoy, Satish B and Pai, Raghuvir B (2014) Comparative approach to knee endoprosthesis stem materials – static analysis of bone-implant system by the means of FEM. In: International Conference on Computational methods in engineering and health sciences (ICCMEH), 19/12/2014, MIT, MANIPAL.

Shenoy, Satish B and Pai, Rammohan S and Rao, Srikanth D and Kini, Vijaya M and Pai, Raghuvir B (2014) Comparison of Dynamic characteristics of 3-axial groove water lubricated bearing with typical water based lubricant. In: International Conference on Environment and Sustainable Technologies (iCEST-2014), January 03-05, 2014, MIT, Manipal, India.

Pai, Rammohan S and Shenoy, Satish B and Rao, Srikanth D and Pai, Raghuvir B (2014) Comparison of Static and Dynamic characteristics of 4-axial and 6-axial groove water lubricated journal bearings: Reynolds and JFO Models. In: National conference on Advanced Aerial/Road Vehicle and its applications, 18 - 19, 2014, MIT, Manipal, India..

Pai, Rammohan S and Rao, Srikanth D and Shenoy, Satish B and Kini, Vijaya M and Pai, Raghuvir B (2014) Comparison of Static characteristics of 3-axial groove water lubricated bearing with water based lubricant. In: International Conference on Environment and Sustainable Technologies (iCEST-2014), January 03-05, 2014, MIT, MIT, Manipal, India.

Krishna Kumar, P and Adhikari, Raviraj and Prabhu, P R and Keni, Laxmikanth (2014) Deep cold rolling simulation of AISI 4140 steel using ANSYS LSDYNA. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Gurumurthy, B M and Harisha, S R and Prabhu, Subramanya R B (2014) Design of Virtual Instrumentation approach for A Multi-Purpose online Mechanical Vibration Experiment Using Labview. In: Proceedings of international conference on advances in Engineering and Technology, 8th -9th January 2014, Nagpur, Maharashtra.

Prabhu, Subramanya R B and Harisha, S R and Gangadharan, K V (2014) Design, Synthesis and fabrication of Magneto Rheological Fluid Damper for low Frequency Application. In: Proceedings of international conference on advances in Engineering and Technology, 8th -9th January 2014, Nagpur, Maharashtra.

Pai, Rammohan S and Shenoy, Satish B and Rao, Srikanth D and Pai, Raghuvir B (2014) Dynamic Characteristics of 3 –Axial Groove Journal Bearings Lubricated With Water Based Lubricant. In: Proceedings of International conference on Computational Methods in Engineering and Health Sciences, December 17-19 2014, Manipal.

Gowri Shankar , M C and Prabhu, P R and Kini, Achutha U and Sharma , S S (2014) Effects of Age Hardening Parameters on Hardness of Al 6061 Alloy Using Design of Experiments. In: Proceedings of International Conference on Computational Methods in Engineering and health Science, December 17-19 2014.

Harisha, S R and Gowda, Thamme C S (2014) Energy-use pattern of Conventional and Non conventional Energies for cooking with the Improvements towards Solar energy. In: Proceedings of Environment and Sustainable Technologies (ICEST-2014), 3rd – 5th January 2014, MIT, Manipal.

Nayak, Rajesh and Shetty, Raviraj and Shetty, Sawan (2014) Experimental and finite element analysis on chip formation mechanism in Machining of Elastomers. In: International Conference on Emerging Technology, Chennai, Tamilnadu.

Manikandan, M and Shivaprasad, U and Suvarna, Ashish Ashok and Bhat, Anuj B and Nair, Vinayak and Shivakrishna, Gunda (2014) External Aerodynamic Analysis of TATA Nano using Numerical Tool. In: International Conference on Advances in Mechanical Sciences, 16/01/2014, Vardhaman college of engineering ,Shamshabad.

Harisha, S R and Gowda, Thamme C S (2014) Feasibility Study on Semi Active Control of Magneto-Rheological Fluid Damper using Artificial Neural Network for Earthquake Vibration Monitoring. In: Proceedings of International conference on Computational Methods in Engineering and Health Sciences, December 17-19 2014, Manipal.

Vinyas, . and Sampath, K and Bhat, Chandrashekhar and Nayak, Prabhakar K and Hareesha , K S (2014) Feature based modelling of lumbar and thoracic vertebrae for 3-D reconstruction of spine. In: Proceedings of International conference on Computational Methods in Engineering and Health Sciences, December 17-19 2014, Manipal.

Nayak, Rajesh and Shetty, Raviraj and Keni, Laxmikanth (2014) Finite Element Analysis and Simulation of Machining of Elastomers. In: Proceedings of International conference on Computational Methods in Engineering and Health Sciences, December 17-19 2014, Manipal.

Harisha, S R and Prabhu, Subramanya R B and Gangadharan, K V (2014) Implementation of Real Time Condition Monitoring of a Single Degree Freedom System Using Skyhook Control. In: Proceedings of international conference on advances in Engineering and Technology, 8th -9th January 2014, Nagpur, Maharashtra.

Rao, Sathish U and Rodrigues, Lewlyn L R (2014) Influence of Machining Parameters on Tool Wear in Drilling of GFRP Composites –Taguchi Analysis and ANOVA Methodology. In: Proceedings of the International Conference on Advances in Mechanical and Robotics Engineering, Malasia.

Kini, Achutha U and Sharma , S S and Jagannath, K and Prabhu, P R (2014) Inhibiting behaviour of MMATT on 6061 Al alloy–15 vol% SiC(p) Composite in HCl Solution. In: Proceedings of 2nd International Conference on Current trends in Engineering and Management (ICCTEM-2014), 17 – 19, July 2014, Mysore, Karnataka, India.

Shetty, Nagaraj and Herbert, Mervin A and Shetty, Divakara S and Krishna Kumar, P (2014) Mechanical Characterization of Bi-Directional Carbon Fiber Reinforced Polymer Composite. In: Proceedings of International conference on Computational Methods in Engineering and Health Sciences, December 17-19 2014, Manipal.

Kini, Vijaya M and Pai, Rammohan S and Shenoy, Satish B and Rao, Srikanth D and Pai, Raghuvir B (2014) Non-linear transient analysis for 3-axial groove water based lubricant. In: International Conference on Environment and Sustainable Technologies (iCEST-2014), January 03-05, 2014, MIT, Manipal, India..

Jayashree, P K and Shetty, Raviraj and Sharma , S S and Shetty, Divakara S (2014) Optimization of Process Parameters during Tungsten Inert Gas Welding of 6061 Aluminum Alloy Using Design of Experiments. In: Proceedings of International conference on Computational Methods in Engineering and Health Sciences, December 17-19 2014.

Singh, Kunwardeep Khanna and Umananda, K V (2014) Optimization of a Suspension Geometry of a Solar Car. In: International Conference on Computational Methods in Engineering & Health Sciences, 17-19 December, 2014, Manipal.

Vikas, Ramakrishna S and Maiya, Manjunatha U and Jayakumar, E and Ranjan, T P D and Pai, B C and Nagaraja, . (2014) Processing and Characterization of SiCp Reinforced Functionally Graded AA 6061 Aluminium Metal Matrix Composites. In: Proceedings of the International Conference on Advances in Mechanical and Robotics Engineering, 8th-9thMarch 2014, Malaysia.

Mahesha, G T and Rao, Pakshit and Shenoy, Satish B and Kini, Vijaya M and Srinivas, G (2014) Review of natural fiber composites. In: International Conference on Environmant and Sustainable Trechnologies (ICEST-2014), 3 t0 5 January 2014, MIT Manipal.

Pai, Rammohan S and Shenoy, Satish B and Rao, Srikanth D and Pai, Raghuvir B (2014) Stability Characteristics of Multiple Axial Groove Journal Bearings Lubricated With Water Based Lubricant. In: International conference on Computational Method and Engineering, Health Science, December 17 - 19, 2014, MIT, Manipal, India.

Pai, Rammohan S and Rao, Srikanth D and Shenoy, Satish B and Pai, Raghuvir B (2014) Static characteristics of 3-axial groove journal bearing lubricated with water based lubricant. In: National conference on Advanced Aerial/Road Vehicle and its applications, 18 - 19, 2014, MIT, Manipal, India..

Pai, Rammohan S and Shenoy, Satish B and Rao, Srikanth D and Pai, Raghuvir B (2014) Stiffness and Damping Coefficients of 3-axial groove water lubricated journal bearings. In: National conference on Advanced Aerial/Road Vehicle and its applications, July 18 - 19, 2014, MIT, Manipal, India..

Prabhu, Subramanya R B and Harisha, S R (2014) Study of Multi agent behaviour of Autonomous Robots. In: International conference on advances in engineering and technology , 2014.

Revankar, Goutam D and Shetty, Raviraj and Rao, Srikanth S and Gaitonde, Vinayak N (2013) Response Surface Model for Surface Roughness during Finish Turning of Titanium Alloy under Minimum Quantity Lubrication. In: International Conference on Emerging Trends in Engineering and Technology, 7th and 8th December 2013, Patong Beach, Phuket (Thailand).

Sharma , S S and Sharma, Sukanya M and Kumari, Rachana (2013) Microstructure and Some Mechanical Properties of Fly Ash Particulate Reinforced Aluminum Alloy Composites Prepared By Different Casting Procedures with and without Wetting Agents. In: National symposium ―Safety in process industries and chemical industries (Chemignite 2k13), October 25th-26th, MIT, Manipal.

Rao, Sathish U and Rodrigues, Lewlyn L R (2013) Application of Taguchi Analysis and ANOVA to determine the Influence of Process Parameters on Tool Wear in Drilling of Polymer Matrix Composites. In: International Conference on Engoneering Materials and Processes, 23rd and 24th May 2013, Chennai.

Madhwesh, N and Karanth, Vasudeva K and Sharma, Yagnesh N (2013) Effect of Staggered Splitters on the Flow Characteristics in a Centrifugal Fan – A Numerical Study. In: 3rd International Engineering Symposium - IES, March 4-6,, Kumamoto University, Japan.

Umananda, K V and Shetty, Divakara S and Sharma , S S (2013) Study of Mechanical and Corrosion Properties of AISI 50110 (EN31) Steel With and Without Heat Treatment. In: International Conference ‘World Congress on Frontiers of Mechanical, Aeronautical and Automobile, 2nd - 3rd Feb, IIT Delhi.

Gowri Shankar , M C and Prabhu, Raghavendra B and Jayashree, C and Sharma , S S and Kini, Achutha U (2013) Machinability study on truning of TI-6AL-4V Alloy under high pressure cooling using neat oil and water soluble oil. In: 3rd International Conference On Recent Advances in Material Processing Technology (RAMPT’13), Jan 7-9, Kovilpatti, Tamilnadu.

Kumar, H S and Pai, Srinivasa P and Sriram, N S and Vijay, G S (2013) ANN based evaluation of performance of wavelet transform for condition monitoring of rolling element bearing. In: International Conference on design and Manufactiring (IConDM 2013), 18-20 july 2013, Kancheepuram Chennai.

Ahmed, Rounaq and Pai, Srinivasa P and Sriram, N S and Vijay, G S (2013) Comparison of Wavelet Based Denoising techniques for Gear Condition Monitoring. In: International Conference on Convergence of Science, Engineering and Management in Education and Research, 26-27 September 2013, Dayananda Sagar Institutions, Bangalore.

Kini, Achutha U and Jagannath, K and Sharma , S S and Bhat, Chandrashekhar and Shetty, Prakash and Shetty, Divakara S (2013) Corrosion Inhibition of AA 6061 in Acidic Medium using Ethyl-2-Phenyl- hydrozono-3-oxobutyrate. In: 3rd International Conference on Mechanical, Automotive and Materials Engineering (ICMAME'2013), April 29-30, 2013 , Singapore.

Bhat, Chandrashekhar and Deepak, P D and Ramakumar, B V N and Jagannath, K and Sharma , S S and Kini, Achutha U (2013) Design and Analysis of Nozzle Ribs in a Gas Turbine. In: 3rd International Conference on Mechanical, Automotive and Materials Engineering (ICMAME'2013), April 29-30, 2013 , Singapore.

Harisha, S R and Gangadharan, K V (2013) Dynamic Analysis of Magneto Rheological Fluid Damper for low Frequency Single Degree Freedom System. In: Proceedings of First International Conference on Emerging Trends in Engineering and Technolog, 4th- 5th October -2013, Munnar, Kerala. .

Sharma , S S and Jagannath, K and Bhat, Chandrashekhar and Kini, Achutha U and Prabhu, P R and Jayashree, P K and Gowri Shankar , M C (2013) Effect of Heat Treatment on Mechanical Properties of AISI 4147 Spring Steel. In: 3rd International Conference on Mechanical, Automotive and Materials Engineering (ICMAME'2013), April 29-30, 2013, Singapore.

Ahmed, Rounaq and Pai, Srinivasa P and Sriram, N S and Vijay, G S (2013) Fast Fourier Transform and Discrete Wavelet Transform for Fault Diagnosis of Gear. In: International Conference on Emerging Trends in Engineering, 15 and 16 May 2013, NITTE Karnataka.

Shetty, Divakara S and Kini, Achutha U and Shetty, Prakash (2013) Inhibition Behaviour of PHOH and PAOH on the Corrosion of 15 Vol. % 6061 Al Alloy/Sicp Composite. In: International Conference on Mechanical Engineering and Mechatronics, August 8-9 2013, Toronto, Ontario, Canada,.

Shetty, Divakara S and Kini, Achutha U and Shetty, Prakash (2013) Inhibition Behaviour of PHOH and PAOH on the Corrosion of 15 Vol. % 6061 Al Alloy/Sicp Composite in 0.5 M Hydrochloric Acid Medium. In: Proceedings of the2nd International Conference on Mechanical Engineering and Mechatronics, August 8-9 2013, Toronto, Ontario, Canada.

Rakshit, NH and Rodrigues, Lewlyn L R (2013) Lean transformation for green and financially Viable foundries. In: International Conference on Advanced Research in Mechanical Engineering, 6th Jan 2013, Hyderabad.

Nayak, Rajesh and Shetty, Raviraj and Shetty, Sawan (2013) Machinability study on elastomer under ambient and cryogenic conditions using taguchi’s design of experiments. In: 3rd International Conference On Recent Advances in Material Processing Technology (RAMPT’13), Jan 7-9, Kovilpatti, Tamilnadu.

Gowri Shankar , M C and Prakash, Shiva and Jayashree, P K and Sharma , S S (2013) Study on Chip-morphology in Turning of Ti-6Al-4V Alloy Under High Pressure Neat oil and Soluble oil. In: 3rd International Engineering Symposium - IES 2013, March 4-6, 2013, Kumamoto University, Japan.

Sharma , S S and Prabhu, P R and Jayashree, P K and Gowri Shankar , M C (2013) The Tensile and wear property Enhancement of AL–ZN–MG Alloys by Precipitation Hardening and Thermomechanical Treatments. In: 3rd International Conference On Recent Advances in Material Processing Technology (RAMPT’13), 7th to 9th January 2013, Kovilpatti, Tamilnadu.

Jagannath, K and Sharma , S S and Bhat, Chandrashekhar and Kini, Achutha U and Prakash, Prannoy (2013) Traction Control System – An Integrated Safety for Two Wheeler. In: 3rd International Conference on Mechanical, Automotive and Materials Engineering (ICMAME'2013, April 29-30, 2013 , Singapore.

Nayak, Rajesh and Shetty, Raviraj and Shetty, Divakara S (2012) Experimental investigation on cutting force and chip morphology under ambient and cryogenic condition during machining of elastomers. In: International conference on Mechanical and Industrial Engineering, 19th August 2012, Goa.

Prabhu, P R and Kulkarni, S M and Sharma , S S (2012) Influence of deep cold rolling and low plasticity burnishing on surface hardness and surface roughness of AISI 4140 steel. In: International Conference on Mechanical and Industrial Engineering (ICMIE 2010, August 25-27, Singapore.

Revankar, Goutam D and Shetty, Raviraj and Shetty, Divakara S and Rao, Srikanth S (2012) Mathematical modelling of burnishing force on ball burnishing of titanium alloy using response surface methodology. In: Proceedings of International Conference in Mechanical and Industrial Engineering, 19th August 2012, Goa.

Sharma , S S and Jagannath, K and Bhat, Chandrashekhar and Prabhu, P R (2012) Age hardening and Thermomechanical Treatment of Stircast Iron Powder Reinforced Al Alloy Metal Matrix Composites. In: International Conference on Mechanical, Production and Materials Engineering (ICMPME'2012), June 16-17 , Bangkok.

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K and Bhat, Chandrashekhar (2012) Deep Cold Rolling Process on AISI 4140 Steel and Optimization of Surface Roughness by Response Surface Methodology. In: International Conference on Mechanical, Production and Materials Engineering (ICMPME'2012, June 16-17, Bangkok.

Sharma , S S (2012) Effect of Precipitation Hardening And Thermo Mechanical Treatments on The Characteristics of Aluminium Alloys. In: Proceedings of National Conference on Mechanical Engineering Technology, June 2, SJCET, Pal ai, India.

Bhat, Chandrashekhar and Anoop, A D and Gopinath, K and Jagannath, K and Sharma , S S and Prabhu, P R (2012) Experimental Investigation of Surface Failure and Fatigue Life of Boron Steel. In: International Conference on Mechanical, Production and Materials Engineering (ICMPME'2012), June 16-17, Bangkok.

Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2012) Propanoyl(1E)-N-(2-acetylphenyl)-2- oxopropanehydrazonoate as a Corrosion Inhibitor for 6061 Al alloy–15 vol% SiC(p) Composite in 0.5 M Hydrochloric Acid. In: International Conference on Mechanical, Production and Materials Engineering (ICMPME'2012), June 16-17, Bangkok.

Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2012) Propanoyl(1E)-N-(2-acetylphenyl)-2-oxopropanehydrazonoate as a Corrosion Inhibitor for 6061 Al alloy–15 vol% SiC(p) Composite in 0.5 M Hydrochloric Acid Solution. In: International Conference on Mechanical, Production and Materials Engineering (ICMPME'2012), June 16-17 , Bangkok.

Jagannath, K and Sharma , S S and Bhat, Chandrashekhar and Prabhu, P R (2012) Thermal Expansion Coefficient for Lead- Graphite and Lead-Iron Metal Matrix Composites. In: International Conference on Mechanical, Production and Materials Engineering (ICMPME'2012), June 16-17, Bangkok.

Pai, Srinath and Kumar, Sathish M and Madhwesh, N and Sharif, Abdul (2012) Study of Performance of Petrol Engine with Variable Compression Ratio using Ethanol as a Blend. In: Recent Advances and Challenges in Energy, January 4 – 6,, Manipal Institute of Technology.

Rao, Sathish U and Rodrigues, Lewlyn L R (2012) Applying wear maps in the optimisation of Machining parameters in drilling of polymer Matrix composites – A review. In: international conference on , Vandavasi.

Harisha, S R and Umashankar, K S and Manujesh, B J and Gowda, Rame D (2012) The Design, Characterization and Application of nano science in the field of metallurgy. In: A National Conference on Emerging Trends in Materials for Advanced Technology, 20th-21st march 2012 , K.V.G. College of Engineering, Sullia. .

Umananda, K V and George, Libu B and Raviraja, A (2012) Design, fabrication and performance evaluation of a hybrid electric vehicle. In: International Conference on Recent Advances and Challenges in Energy, January 4 –6, 2012, MIT, Manipal.

Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M and Herle, Ramadev (2012) Effect of Echo as Corrosion Inhibitor for 15 vol.% 6061 Al Alloy/Sicp Composite in 1 M Hydrochloric Acid Medium. In: Adavnces in New Engineering Materials & Characterization AMC-2010, KVGCE, Sullia (D.K).

Shenoy, Satish B and Pai, Rammohan S and Pai, Raghuvir B and Rao, Srikanth D (2012) Effect of turbulence and offset loading on the performance of a single pad externally adjustable fluid film bearing. In: Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition, November 9-15, 2012, Houston, Texas, USA..

Vijay, G S and Pai, Srinivasa P and Sriram, N S (2012) Genetic Algorithm based Neural Network for Classification of Rolling Element Bearing Condition. In: National Symposium on Acoustics (NSA-2012), Dec 5 toDec 7 2012, Tamilnadu, India.

Upadhyaya, Y S and Sridhara, B K (2012) Strain Controlled fatigue Crack initiation life prediction of Materials. In: Proceedings of 3rd Asian Conference on Mechanics of Functional Materials and Structures ACMFMS 2012.

Rodrigues, Lewlyn L R and Hebbar, Sunith and Herle, Ramadev (2011) Bullwhip Effect Mitigation in Trading System: A System Dynamics Approach. In: Proceedings of the World Congress on Engineering 2011, July 6 - 8, 2011, London, U.K..

Manjunath, M S and Karanth, Vasudeva K and Sharma, Yagnesh N (2011) Three Dimensional Numerical Analysis of Conjugate Heat Transfer for Enhancement of Thermal Performance using Finned Tubes in an Economical Unglazed Solar Flat Plate Collector. In: Proceedings of the World Congress on Engineering 2011, July 6 - 8, 2011, London, U.K..

Madhwesh, N and Karanth, Vasudeva K and Sharma, Yagnesh N (2011) Impeller Treatment for a Centrifugal Fan using Splitter Vanes – A CFD Approach. In: Proceedings of the World Congress on Engineering 2011 Vol III, 2011, July 6 - 8,, London, U.K..

Mohan, N S and Jagannath, K and Sharma , S S and Bhat, Chandrashekhar (2011) Optimization of drilling conditions of Glass fibre reinforced plastic composite material using genetic algorithm. In: The Nineteenth Annual Int.Conf. on Composites or Nano Engg.(ICCE 19, July 24-30,2011, SHANGHI, CHAINA.

Bhat, Chandrashekhar and Sharma , S S and Jagannath, K and Mohan, N S and Sathisha, S G (2011) Prediction of Sound Attenuation Characteristics of Mufflers. In: The Nineteenth Annual Int.Conf. on Composites or Nano Engg.(ICCE 19, July 24-30, SHANGHI, CHAINA.

Jagannath, K and Sharma , S S and Mohan, N S and Prabhu, P R (2011) Stir Casting Technique for Low Melting Point Metal Matrix Composities and Characteristic Study. In: The Nineteenth Annual Int.Conf. on Composites or Nano Engg.(ICCE 19), July 24-30, Shanghi, Chaina.

Sharma , S S and Jagannath, K and Mohan, N S and Bhat, Chandrashekhar and Prabhu, P R and Chadaga, R C (2011) Thermomechanical and Precipitation Hardening of Stir-Cast Silica Reinforced Aluminium alloy Matrix Composites. In: The Nineteenth Annual Int.Conf. on Composites or Nano Engg.(ICCE 19), July 24-30, Shanghi, Chaina.

Vijay, G S and Pai, Srinivasa P and Sriram, N S and Rao, Raj B K N (2011) Bearing Diagnostics – A Radial Basis Function Neural Network Approach. In: International Conference COMADEM 2011 (24th International Congress on Condition Monitoring and Diagnostics Engineering Management, Advances in Industrial Asset Integrity Management, 30th May – 1st June, , Clarion Hotel Stavanger Stavanger, Norway.

Arunachala, U C (2011) Performance Deterioration of Thermosiphon Solar flat plate water heater due to Scaling. In: International Conference on Mechanical, Automotive and Aerospace Engineering, May 17 – 19, 2011., Legend Hotel, Kuala Lumpur, Malaysia..

Raghunandana, K and Corda, John V (2011) Static Characteristics of a Journal Bearing with Engineered Slip/no-slip Surfaces. In: International Engineering Symposium, IES , March 3 – 5, Kumomoto University, Japan..

Battu, Sreenath and Upadhyaya, Y S and Rao, Venugopal A and Kumar, Vikas (2011) Expert System for Fatigue Life Prediction of Materials. In: National Conference on Advances in Mechanical Engineering, 03 – 05 January, 2011.

Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2011) Inhibition of Corrosion of 304 SS in Acid Medium by N – Furfuryl –N'– Phenyl thiourea. In: National Conference on Advances in Mechanical Engineering, Jan 03- 05, 2011, M.I.T.,Manipal. (Submitted)

Vijay, G S and Pai, Srinivasa P and Sriram, N S (2011) Discrete Wavelet Transform for Fault Diagnosis of Rolling Element Bearing. In: Proceedings of the National Conference on Advances in Mechanical Engineering , Jan 3rd – 5th, Manipal Institute of Technology, Manipal.

Chandak, Shriharsh and Anjaiah, D and Sharma , S S (2011) Dynamic Theory of Motivation New Success Model for Youth (Part -1). In: National Conference on Advances in Mechanical Engineering, 03 – 05 January, MIT Manipal.

Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M and Herle, Ramadev (2011) Inhibition of corrosion of 15 Vol. % 6061 Al Alloy/SiCp composite using MMATT in 0.5 M Hydrochloric acid medium. In: National Conference on Advances in Mechanical Engineering 2011, 03 – 05 January, 2011, Jan 3-5, Manipal.

Pai, Dayananda and Rao, Srikanth S and Shetty, Raviraj (2011) Studies on Application of Response Surface Methodology for the analysis of Specific Energy during grinding of DRAC‟s. In: National Conference on Advances in Mechanical Engineering, 03 – 05 January 2011, MIT Manipal.

Prabhu, P R and Kulkarni, S M and Sharma , S S (2011) The effects of deep cold rolling and low plasticity burnishing process on surface hardness of AISI 4140 steel. In: National Conference on Advances in Mechanical Engineering, 03 – 05 January, MIT Manipal.

Kini , Chandrakant R and Shenoy, Satish B and Sharma, Yagnesh N (2011) A Computational Conjugate Thermal Analysis of HP Stage Turbine Blade Cooling with Innovative Cooling Passage Geometries. In: Proceedings of the World Congress on Engineering, July 6 - 8, 2011, London, U.K..

Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2011) Corrosion Inhibition of Al6061- SiCp Composite in 0.5 M Hydrochloric Acid. In: 2011 International Conference on Chemistry and Chemical Process, Bangkok, Thailand.

Harisha, S R and Umashankar, K S and Manujesh, B J and Gowda, Rame D (2011) Design, Development and Fabrication of the paraboloidal dish Solar concentrator for domestic Applications. In: National conference onRecent trends in Alternate Sources of Energy and pollution control , 13th & 14th May 2011, K.V.G. College of Engineering, Sullia.

Rao, Vijayalakshmi R and Manujesh, B J and Umashankar, K S and Harisha, S R and Sham Aan, M P (2011) Design, Synthesis, and Characterization of Hybrid Sandwich Composites for Structural Applications. In: National Conference on Advances in Mechanical Engineering, 03 – 05 January, 2011 , Manipal.

Harisha, S R and Umashankar, K S and Manujesh, B J and Gangadharan, K V (2011) Dynamic analysis of Magneto-Rheological Fluid Damper for low frequency applications. In: National Conference on Advances in Mechanical Engineering, 03 – 05 January, MIT Manipal.

Suvarna, Hemanth and Shankar, K S and Madhwesh, N and Rao, Mohan (2011) Effect of Injection Timing on the Performance of Single Cylinder Stationary Diesel Engine Operated with Waste Cooking Oil Biodiesel. In: National Conference on Advances in Mechanical Engineering 2011, 03 – 05 January, M I T Manipal..

Pai, Dayananda and Rao, Srikanth S and Shetty, Raviraj (2011) Multi-Objective Optimisation by Combination of Response Surface Methodology and Desirability Function for Grinding of DRACs. In: Proceedings of the International Conference on Design and Advances in Mechanical Engineering, 16 - 17 December, 2011., SKP Engineering College, Tiruvannamalai, TamilNadu., India.

Harisha, S R and Umashankar, K S and Manujesh, B J and Gowda, Thamme C S and Gowda, Rame D (2011) Survey and Energy-use pattern of Conventional and Non conventional Energies for Domestic Applications and Suggestions on Improvements towards Sustainability. In: National conference on Recent trends in Alternate Sources of Energy and pollution control , 13th-14th May 2011 , K.V.G. College of Engineering, Sullia.

Prabhu, P R and Kulkarni, S M and Sharma , S S (2011) An investigation of the Surface topography of deep cold rolled aisi 4140 steel. In: National Conference on "Trends and Advances in Manufacturjng Engineering", 29-3rd' Sept.2011, TAME-20ll .

Vijay, G S and Pai, Srinivasa P and Sriram, N S (2010) A Comparative Study of Soft Computing Techniques for Rolling Element Bearing Condition Monitoring using Vibration Signal Analysis. In: International Conference ICETMCA 2010 (International Conference on Emerging Trends in Mathematics and Computer Applications 2010, December 16th to 18th, Mepco Schlenk Engineering College, Sivakasi, .

Vijay, G S and Pai, Srinivasa P and Sriram, N S (2010) Artificial Neural Network based Condition Monitoring of Rolling Element Bearing using Vibration Signals. In: Proceedings of NAME 2010, November 12th to 13th, JNN College of Engineering, Shimoga.

Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2010) N – furfuryl –N'– phenyl Thiourea as Inhibitor for the Corrosion of Stainless steel type 304 in HCl solution. In: Proceedings of NAME 2010, 23-24 September 2010, Shimoga. (Submitted)

Murthy, B R N and Rodrigues, Lewlyn L R and Sharma, Yagnesh N and Anjaiah, D (2010) Influence of process parameters on the quality of hole in drilling of GFRP composites – An Experimental Investigation using DOE. In: International Conference on Mechanical and Electrical Technology (ICMET 2010), 10-12 Sept. 2010 .

Shetty, Pradeep Kumar and Rodrigues, Lewlyn L R (2010) Total Productive Maintenance of a Diesel Power Generating Unit of a Institution Campus. In: International Conference on Mechanical and Electrical Technology (ICMET 2010), 10-12 Sept. 2010 .

Sharma , S S and Prabhu, P R and Chadaga, RajGopal P (2010) Thermal treatments & characteristics study on Unalloyed Structural (AISI 1140)steel. In: International Conference on Mechanical and Industrial Engineering (ICMIE 2010), August 25-27,, Singapore.

Vijay, G S and Pai, Srinivasa P and Sriram, N S (2010) Artificial Neural Network based Condition Monitoring of Rolling Element Bearing. In: Artificial Neural Network based Condition, 7th May, 2010.

Prabhu, P R and Kulkarni, S M and Sharma , S S (2010) Development of a Low Cost Deep Cold Rolling (DCR)Set-up. In: International Conference on ‘Frontiers in Mechanical Engineering-FIME 2010’, 20-22 May, NITK, Surathkal.

Kuttan, Appu K K and Shreeprakash, B and Sharma , S S (2010) Stir casting Technique for low melting point metal matrix Composites and characteristic study of Tin- graphite Composite. In: International Conference ONl 'Frontiers in Mechanical Engineering- FIME2010, 20-22 May,, NITK Suratkal.

Arunachala, U C and Bhatt, Siddhartha M and Sreepathi, L K (2010) Performance Deterioration Analysis of Direct Solar Hot Water System in Scaling Environment. In: Proceedings of International Conference on Recent Advances in Mechanical Engg. (ICRAME2010), 8-9, April 2010, Noorul Islam University, Kumaracoil, Tamilnadu, India..

Suvarna, Hemanth and Madhwesh, N and Rao, Sriniviasa B R (2010) Comparative Study of Performance of a Dual Fuel Compression Ignition Engine with LPG and Biodiesel. In: National conference on Mechanical Engineering trends-COMET-2010, 19-20 February, BITM, Bellary.

Rao, Sathish U and Rodrigues, Lewlyn L R (2010) Application of wear mechanism maps in optimising the process parameters of drilling for polymer matrix composites – A review. In: National Conference on Approaching Scholastic Horizons in Mechanical Engineering, Banglore.

Marigoudar, Rajaneesh N and Sadashivappa, K (2010) Characterization of fly ash filled polyester composite material under Uni-Axial tension and Uni-Axial Compression. In: International Conference on ‘Frontiers in Mechanical Engineering, FIME2010, 20th to 22nd May 2010, Mangalore, Karnataka, India.

Shetty, Divakara S and Kini, Achutha U and Shetty, Prakash (2010) Corrosion Inhibition of 15 Vol. % 6061 Al Alloy/SiCp Composite in 1 M Hydrochloric Acid Medium. In: International Conference on Mechanical and Electrical Technology (ICMET 2010), Sept 10-12, Singapore.

Arunachala, U C and Sreepathi, L K (2010) Effect of scaling in solar thermosiphon flat plate collector on water temperature in storage tank. In: National Conference on Advances in Mechanical Engineering (NAME – 2010).

Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2010) Inhibition of 304 SS in Hydrochloric Acid Solution by N – Cyclohexyl – N′– Phenyl thiourea. In: International Journal of Contemporary Science, Engineering and Technology, 2010. (Submitted)

Harisha, S R and Hari Krishna., C and Jyoti Prasad., P and Mayander , Pratap and Shridhar, . and Gangadharan, K V (2009) A Case Study of Experiments on Virtual Laboratory through Internet. In: Recent Trends in Advanced Materials RTAM-2009, 2009, KVGCE, Sullia D.K.

Arunachala, U C and Bhatt, Siddhartha M and Sreepathi, L K (2009) Prediction, Evaluation and Prevention of Scaling in Flat Plate Solar Water Heaters. In: ICAMB 2009, Dec 14 – 16, 2009. , SMBS, VIT University, Vellore – 632 014, India.. (Submitted)

Sharma, Shalini Kumari and Rodrigues, Lewlyn L R (2009) Challenges in Engineering Education in the New Millennium. In: Proceedings of the National Conference on Advances in Mechanical Engineering 2009, 5 October 2009. (Submitted)

Rao, Sathish U and Rodrigues, Lewlyn L R (2009) Machining Optimization Of Polymer Matrix Composites Using Wear Mechanism Maps - A Review. In: Proceedings of the National Conference on Advances in Mechanical Engineering 2009, 5 October 2009. (Submitted)

Murthy, B R N and Rodrigues, Lewlyn L R and Sharma, Yagnesh N (2009) System Dynamics In Drilling Of Composite Materials: Issues, Perspectives And Model development - A Review. In: Proceedings of the National Conference on Advances in Mechanical Engineering 2009, 5 October 2009.

Anurag, Rathindra and Shetty, Raviraj and Nayak, Rajesh and Keni, Laxmikanth (2009) Surface Roughness Minimization for Cutting Glass Using Hot Air by Crack Propagation Method Using Taguchi’s Design of Experiments. In: Proceedings International Conference on Science, Technology and Innovation for Sustainable Well-Being, 23-24 July 2009, Mahasarakham University, Thailand.

Sharma , S S and Prabhu, P R (2009) The effect of trace element magnesium on the characteristics of age hardened and thermomechanically treated Al – Zn alloys. In: International Conference on Advances in Mechanical Engg.(ICAME 2009, June 24-25, Shahalam, MALAYSIA.

Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2009) Corrosion Inhibition of 304 SS in Hydrochloric Acid solution by N – Cyclohexyl – N′– Phenyl Thiourea. In: International conference on Modern Trends in Materials Technology-, 19-20 January,2009, Sriperumbudur, Tamilnadu.

Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M and Herle, Ramadev (2009) Corrosion inhibition behavior study of Ethyl-2-Phenyl Hydrozono-3-Oxobutyrate on 15 vol. % 6061 Al alloy/SiCp composite in hydrochloric acid media. In: National Conference on Advances in Mechanical Engineering – AIMEngg-2009, Manipal.

Murthy, Krishna and Madhwesh, N and Rao , Shrinivasa B R and Samaga, B S (2009) Effect of Injection Timing on the Performance of Dual Fuel Compression Ignition Engine with Exhaust Gas Recirculation. In: ICAMB 2009, Dec 14 – 16, 2009. , SMBS, VIT University, Vellore , India..

Pai, Rammohan S and Rao, Srikanth D and Kini, Vijaya M and Shenoy, Satish B and Pai, Raghuvir B (2009) Effect of groove location on the stability of multiple axial groove water lubricated journal bearing-A non linear transient approach. In: International conference on Applied Mechanics and Mechanical Engineering, December 25-27, 2009, Bangkok, Thailand.

Rao, Srikanth D and Pai, Rammohan S and Kini, Vijaya M and Shenoy, Satish B and Pai, Raghuvir B (2009) Effect of groove location on the static characteristics of multiple axial groove water lubricated journal bearing. In: International conference on Applied Mechanics and Mechanical Engineering, December 25-27, 2009, Bangkok, Thailand.

Sharma , S S and Prabhu, P R and Chadaga, RajGopal P (2009) Effect of thermo mechanical treatment on the Mechanical properties of 7XXX series Aluminium alloys. In: Proceedings of the National Conference on Advances in Mechanical Engineering 2009, 5 October 2009, MIT Manipal.

Chadaga, RajGopal P and Appukuttan, K K and Sharma , S S (2009) Experimental Demonstration of an improved Magneto rheological fluid damper and study of damping coefficient. In: Proceedings of the International Conference on Emerging Research and Advances in Mechanical Engineering, ERA 2009, June 2009, Velammal Engineering College, Chennai.

Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2009) Inhibition of 304 SS Corrosion in Hydrochloric Acid Solution. In: Proceedings of the National Conference on Advances in Mechanical Engineering – AIMEngg-2009, Manipal Institute of Technology, Manipal.

Kini, Achutha U and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2009) Inhibition of Corrosion of 15 Vol.%6061 Al Alloy/Sicp Composite using Ethyl-2-Phenyl Hydrozono-3-Oxobutyrate in 0.1 N Hydrochloric Acid Medium. In: Recent Trends in Advanced Materials RTAM-2009, KVGCE, Sullia D.K.

Rao, Sathish U and Rodrigues, Lewlyn L R (2009) Machining optimisation of polymer matrix composites using wear mechanism maps – A Review. In: Proceedings of the National Conference on Advances in Mechanical Engineering 2009, 5 October 2009, Mysore.

Madhwesh, N (2009) Performance of Dual Fuel Compression Ignition Engine for Variable Injection Timing with Exhaust Gas Recirculation. In: Proceedings of the National Conference on Advances in Mechanical Engineering – AIMEngg-2009, Manipal Institute of Technology, Manipal.

Rai, Rajesh and Shetty, Raviraj and Rao, Srikanth S and Rao, Gangadar (2008) The statistical modeling of surface roughness in face milling of Hot work Chromium Steel (AISI H11). In: International Conference on Fascinating Advancement in Mechanical Engineering, 11-13, December 2008, Mepco Schlenk Engineering College, Sivakasi, India.

Arunachala, U C and Sreepathi, L K and Bhatt, Siddhartha M (2008) Solar Water Systems for Scaling Environments. In: Proceedings of the 2nd National Conference on “Advances in Mechanical Sciences, AIMS 2008, 27th & 28th March 2008..

Bhatt, Siddhartha M and Sreepathi, L K and Arunachala, U C (2008) Effect of Scale Formation in Thermosyphon Solar Flat Plate Water Heaters. In: ENERGY 2008, 2008, NIT Calicut.

Sharma , S S and Prabhu, P R and Chadaga, RajGopal P (2008) Heat treatment & Characteristics study on EN 8 steel. In: National Conference On Advances in Mechanical Engg.- 2008, MIT Manipal.

Kamath, Vasanth and Rodrigues, Lewlyn L R (2008) Innovation in Manufacturing sectors in India Exploiting ideas for profitable growth – A Review. In: National Conference On Advances In Mechanical Engineering - 2008, 2008. (Submitted)

Shanbhag, Narendranath and Rodrigues, Lewlyn L R (2008) Integrating Quality Function Deployment into strategic information systems planning. In: National Conference on Advances in Mechanical Engineering – 2008, 2008. (Submitted)

Pai, Srinivasa Asha and Pai, Srinivasa P and Rodrigues, Lewlyn L R (2008) Knowledge Management In Engineering Institutions : An Approach Based On Best Practices. In: National Conference on Advances In Mechanical Engineering – 2008, 2008. (Submitted)

Kamath, Vasanth and Rodrigues, Lewlyn L R (2008) Knowledge Management in Manufacturing Issues, Perspectives and Model Development – A review. In: National Conference On Advances In Mechanical Engineering 2008, 2008. (Submitted)

Pai, Asha S and Pai, Srinivasa P and Rodrigues, Lewlyn L R (2008) Knowledge management in engineering institutions: an approach based on best practices. In: National Conference on Advances in Mechanical Engineering, 28-30 October, 2008.

Herle, Ramadev and Shetty, Prakash and Shetty, Divakara S and Kini, Achutha U (2008) N-Cyclohexyl - N - Phenyl Thiourea as Correoion Inhibitor for 304 SS In Hydrochloric Acid Solution. In: National Conference On Advances In Mechanical Engineering , 2008. (Submitted)

Pai, Rammohan S and Rao, Srikanth D and Pai, Raghuvir B (2008) Non-linear transient analysis of five axial groove water lubricated journal bearing. In: International Conference on Advanced Tribology, ICAT 2004., December 1-3, National University of Singapore, Singapore.

Pai, Rammohan S and Kumar, Rajnish and Rao, Srikanth D and Pai, Raghuvir B (2008) Stability analysis of five axial groove water lubricated journal bearings. In: International Conference on Advanced Tribology, ICAT 2004., December 1-3, National University of Singapore, Singapore.

Pai, Rammohan S and Rao, Srikanth D and Shenoy, Satish B and Pai, Raghuvir B (2008) Static characteristics of 3 –axial groove water lubricated journal bearings. In: National conference on AIM Engineering, Oct. 28-30, 2008, M.I.T., Manipal.

Kumar, Ajithanjya M K and Rao, shrinivasa B R and Rodrigues, Lewlyn L R (2008) A Study of Variable Frequency Drive (VFD) For Performance Improvement In PUMPS. In: National Conference on Advances In Mechanical Engineering 2008, 2008.

Kundapur, Poornima Panduranga and Rodrigues, Lewlyn L R and Gopalkrishna , B (2008) Suitability of KM Success Models to Indian Software Sectors: A Comparative study. In: National conference on Advances In Mechanical Engineering – 2008, 2008. (Submitted)

Shenoy, B S and Sharma , S S and Appukuttan, K K (2007) Application of Fem in Orthogonal Cutting of Discrete Graphite Particulate Reinforced Lead Composite. In: International Conference on Advances in Manufacturing Engineering (lCAME - 2007), October 24 - 26,, MIT, Manipal.

Sharma , S S and Shenoy, Satish B and Shreeprakash, B and Kuttan, Appu K K (2007) Dry Sliding Wear Behavior of Lead-Graphite Cast Metal Matrix Composites. In: Int.national Conference on Advances in Manufacturing Engineering (ICAME 2007, October24 – 26, Manipal.

Shetty, Raviraj and Pai, Raghuvir B and Kumar, D (2007) Chip and built-up edge formation in turningAge hardened aa6061/15 vol. % sicp composites With steam as coolant. In: Proceedings of Second International Conference on Recent Advances in Composite Materials, 2007, New Delhi, India.

Vasudev, M and Rao, Srikanth S and Shetty, Raviraj and Pai, Raghuvir B (2007) Influence of lubrication condition on surface Roughness in turning of metal matrix composites. In: Proceedings of Sixth International Conference on composite science and technology , 2007, Durban, South Africa.

Raghunandana, K (2007) Inverse Design Methodology for the Stability Design of Elliptical Bearings Operating with Non-Newtonian Lubricants. In: Proceedings of the World Congress on Engineering and Computer Science, October 24-26, San Francisco, USA.

Pai, Asha S and Rodrigues, Lewlyn L R and Pai, Srinivasa (2007) Knowledge management models – a review and their applicability in educational institutions. In: 37th ISTE Annual Convention and National Seminar on Excellence in Technical Education Through Innovation, 17-19 December, 2007.

Shetty, Raviraj and Nayak, Rajesh and Shetty, Udaya Kumar and Kanthraj, A N and Pai, Raghuvir B (2007) Planar robot for cutting glass using hot air by crack propagation method. In: Proceedings of International Conference in Manufacturing and Automation, National University of Singapore, Singapore.

Shetty, Raviraj and Nayak, Rajesh and Pai, Raghuvir B (2007) Steam as environment friendly lubricant in metal Cutting process. In: Proceedings of 15 th Symposium on lubricants, additives, waxes and petroleum specialty products, Mumbai, India.

Kuttan, Appu K K and Sreeprakash, B and Sharma , S S (2007) Stir casting Technique for low melting point Metal matrix composites and Characteristic study of tin- graphite composite. In: National Conference on Recent Advances in Design Engineering (RADE 2007), February 22 – 24, 2007, MIT, Manipal – 576 104.

Shenoy, B S and Shetty, Raviraj and Pai, Raghuvir B (2006) Application of Finite-element analysis in orthogonal cutting of Aluminium metal matrix composites. In: International Conference on Advances in Mechanical Engineering, 14-16 December 2006, SRM Institute of Science and Technology Deemed University, Chennai, India.

Dharmaraj, N and Rodrigues, Lewlyn L R and Rao, Shrinivasa B R (2006) Technology Management in Innovative Organization: A System Dynamics based Perspective. In: IEEE International Conference on Management of Innovation and Technology, 21-23 June 2006 , Singapore.

Kuttan, Appu K K and Sreeprakash, B and Sharma , S S (2006) Stir Casting Technique for low melting point metal matrix composites and characteristic study of Tin-Graphic Composite. In: Third National Conference on Mechanical Engineering (NATCON.ME, MAY2006, SIT, TUMKUR.

Rodrigues, Lewlyn L R and Rao, Shrinivasa B R and Dharmaraj, N (2006) Technology & Human Resource Optimization In Manufacturing Uisng System Dynamics Approach. In: Proceedings of National Conference on Advances in Manufacturing Engineering, April 21-22, 2006, Salem, India. (Submitted)

Pai, Rammohan S and Pai, Raghuvir B and Majumdar, B C and Hargreaves, D J (2006) Comparison of static performance characteristics of 3-Axial groove water lubricated journal bearings: Reynolds and JFO models. In: AUSTRIB, Dec 3-6, 2006, Brisbane, Australia.

Shenoy, B S and Pai, Raghuvir B and Shetty, Raviraj and Rao, Srikanth D (2006) Overall elastohydrodynamic lubrication analysis of a Journal bearing usingCFD and FSI. In: International Conference on Industrial Tribology, 2006, Banglore, India.

Shetty, Raviraj and Pai, Raghuvir B and Shenoy, B S and Rao, Srikanth S (2006) Study of tool wear in turning 15% SiCp reinforced 6061 aluminium metal matrix composite with steam as coolant. In: Proceedings of International conference on Advanced Material processing and characterization, Chennai, India.

Shetty, Raviraj and Pai, Raghuvir B and Barboza, A B V and Rao, Srikanth S (2006) Tribological studies on PCBN tool in turning metal matrix composites with steam as coolant. In: Proceedings of International Tribological conference (AUSTRIB 2006), 2006, Brisbane, Australia.

Shetty, Raviraj and Nayak, Rajesh and Pai, Raghuvir B and Rao, Srikanth S (2006) Tribological studies on steam penetration in different Directions in turning of metal matrix composites. In: International Conference on Industrial Tribology,ICIT-2006 , Nov 30th to 02nd December 2006, Indian Institute of Science, Bangalore.

Raghunandana, K and Majumdar, B C (2005) Comprehensive inverse design methodology of hydrodynamic Journal bearings. In: Proceedings of the International Conference on Recent Advances in Mechanical & Materials Engineering – ICRAMME 2005, May 30 – 31, University of Malaya, Kaulalampur..

Rodrigues, Lewlyn L R and Krishnamurthy, G R (2004) Development of Strategy Pull Type KM Model : Implications for Achieving Quality Outcomes in Engineering Educaton. In: Proceedings of International Mechanical Engineering Conference 2004, December 5-8, 2004, Kuwait. (Submitted)

Pai, Asha S and Rodrigues, Lewlyn L R (2004) Strategic competence through km & hrm in technical education. In: 34th Annual Convention of ISTE, 18-20 December 2004, Netaji Subhas Institute of Technology, New Delhi.

Jagannath, K and Raghunandana, K and Chincholkar, A M (2004) Transient Analysis of journal bearings operating with non-Newtonian lubricants under different loading conditions. In: International Conference on Advanced Tribology, 1-3 December, National University of Singapore, Singapore.

Shreeprakash, B and Sharma , S S and Appukuttan, K K (2004) Casting Techniques for MMC with High Density Matrix and Low Density Particulate Materials. In: Proceedings of the First National Conference on Development and Challenges in Manufacturing Engineering, MIT Manipal.

Raghunandana, K and Majumdar, B C (2004) Non-linear analysis for the stability of flexibly supported oil journal bearings operating with non-newtonian lubricants. In: International Conference on Advanced Tribology, ICAT 2004., December 1-3, National University of Singapore, Singapore.

Shiva Prasad, H C and Sharma, Yagnesh N and Gopalkrishna , B (2004) The scope of academic Institutions in spawning New-age technologies for building young Entrepreneurial society. In: 6th Biennial Conference, EDI, Ahamdabad .

Upadhyaya, Y S and Sridhara, B K (2003) Influence Of Testing Frequency On The Fatigue Behaviour Of Metals And Alloys. In: XIII National Conference of Indian Society of Mechanical Engineers, 30-31 December 2003, IIT Roorkee.

Sharma , S S and Shreeprakash, . and Appukuttan, K K (2003) Stir Casting Technique for Low Melting,Highdensity Cast Metal Based Graphite Composite. In: Proceedings of the National Conference on Composite Materials-Production and Proceeding, March 22, Annamalai,University, India,.

Pai, Rammohan S and Pai, Raghuvir B and Majumdar, B C and Hargreaves, D J (2003) Effect of groove angles on the static characteristics of multiple axial groove water lubricated bearings. In: National Conference of ISME, Dec. 30-31, 2003, IIT, Roorkee.

Upadhyaya, Y S and Sridhara, B K (2002) Effect of Loading Frequency on Composites : A Review. In: National Conference in Mechanical Engineering, 21 December 2002, JNTU College of Engineering Anantapur.

Raghunandana, K and Majumdar, B C and Maiti, R N (2000) Stability of Rigidly Supported Oil Journal Bearings Using non-Newtonian Lubricants: Comparison of Linear and Non-Linear Analysis. In: International Tribology Conference, ITC 2000, October 29 - November 2, , Japanese Society of Tribologists..

Murthy, Venkatesh P and Rodrigues, Lewlyn L R and Nagaraja, . (1998) Applying Deming's TQM Principles To HIgher Education: Issues and Perspectives. In: Proceedings of National Conference on Biomedical Engg, April 9-11, 1998., MIT Manipal.

Nagaraja, . and Bhat, Chandrashekhar (1998) CNC Programming using Graphical Numerical Control. In: Proc. of National conference on Intelligent Manufacturing System at Coimbatore Institute of Technology, Feb. 6-7, 1998., Coimbatore.

Kumar, Sulok and Joseph, Benjamin and Somaraju, VVJ and Nagaraja, . (1998) Development of a Hip Joint as a Component of a Hip Guidance Orthosis for Paraplegic Patients. In: Proceedings of National Conference on Biomedical Engg, April 9-11, 1998., MIT Manipal.

Setty, Srinivasa and Nagaraja, . (1991) Municipal Solid Waste Recovery Technologies – Indian Scenario. In: Proceedings of 7th National Convention of Mechanical Engineers, November 28 – 30, 1991, West Bengal State Centre, Inst. of Engineers (India),Calcutta.

Gowda, Thamme C S and Harisha, S R Design and Fabrication of Instant Water heater with Effective Utilization of Agricultural Wastes for Domestic Applications. In: Proceedings of Environment and Sustainable Technologies (ICEST-2014), 2014.

Prabhu, P R and Kulkarni, S M and Sharma , S S Turning Aided Deep Cold Rolling - A Cost Effective Mechanical Surface Treatment Technique for Surface Hardness Enhancement. In: 3rd International Conference On Recent Advances in Material Processing Technology (RAMPT’13), 7th to 9th January 2013, Kovilpatti, Tamilnadu, India.

Thesis

Khader, Abdul S M (2014) Fluid-structure interaction of blood flow Through human arteries. Phd. Thesis thesis, Manipal Institute of Technology, Manipal.

Prabhu, Raghavendra P (2014) Investigation on the effects of process Parameters for fatigue life improvement Using turn-assisted deep cold rolling process. Phd. Thesis thesis, Manipal Institute of Technology, Manipal.

Kini, Achutha U (2011) A Study on Corrosion and Corrosion Inhibition of 6061 Al alloy-15 vol. % SiC(p) Composite in Hydrochloric Acid Medium. Phd. Thesis thesis, Manipal Institute of Technology, Manipal.

Shenoy, Satish B (2008) Performance evaluation of a single pad Externally adjustable fluid film bearing. Phd. Thesis thesis, Manipal Institute of Technology, MIT, Manipal.

Rajendra, Beedu (2007) Vibration isolation for a passenger's seat in a Mobile vehicle using active and semi-active Dampers. Phd. Thesis thesis, Manipal Institute of Technology, Manipal University, Manipal.

This list was generated on Wed Mar 22 16:11:32 2017 UTC.