 | Up a level |
Prabhu, Deepa and Sharma, S S and Prabhu, P R and Jomy, Jilna and Sadanand, Ramakrishna Vikas (2022) Analysis of the inhibiting action of pectin on corrosion of AISI1040 dual‑phase steel with ferrite–martensite and ferrite–bainite structure: a comparison in 0.5 M sulphuric acid. Journal of the Iranian Chemical Society, 19. pp. 1109-1128. ISSN 1735207X
Maithri, M and Raghavendra, U and Gudigar, Anjan and Samanth, Jyothi and Barua, Prabal Datta and Murugappan, Murugappan and Chakole, Yashas and Acharya, Rajendra U (2022) Automated emotion recognition: Current trends and future perspectives. Computer Methods and Programs. ISSN 0169-2607
Pathan, Sameena and Ali, Tanweer and Vincent, Shweta and Nanjappa, Yashwanth and David, Rajiv Mohan and Kumar, Om Prakash (2022) A Dermoscopic Inspired System for Localization and Malignancy Classification of Melanocytic Lesions. Applied Science Basel, 12 (9). ISSN 2076-3417
Nayak, Sachin and Vincent, Shweta and Sumathi, K and Kumar, Om Prakash and Pathan, Sameena (2022) An Ensemble of Statistical Metadata and CNN Classification of Class Imbalanced Skin Lesion Data. International Journal of Electronics and Telecommunications, 68 (2). pp. 251-257. ISSN 2081-8491
Dash, Santanu Kumar and Chakraborty, Suprava and Roccotelli, Michele and Sahu, Umesh Kumar (2022) Hydrogen Fuel for Future Mobility: Challenges and Future Aspects. Optimal Scheduling of Dynamic Pricing Based V2G and G2V, 14 (14). ISSN 2071-1050
Jaiswal, Ankur and Jawale, H P (2022) Infuence of tolerances on error estimation in P3R and 4R planar mechanisms. Journal of the Brazilian Society of Mechanical Sciences and Engineering. pp. 44-62. ISSN 1678-5878
Jomy, Jilna and Prabhu, P R (2022) Inhibitors Incorporated Into Water‑Based Epoxy Coatings on Metals for Corrosion Protection: A Review. Journal of Bio- and Tribo-Corrosion, 8 (44). ISSN 2198-4220
Deepak, D and Gowrishankar, M C and Shreyas, Sai S (2022) Investigation on the Wire Electric Discharge Machining Performance of artificially aged Al6061/B4 C composites by Response Surface Method. Materials Research. ISSN 1516-1439
Shenoy, Prajwal and Sompur, Vignesh and Vardhan, SKM (2022) Methods for Measurement and Analysis of Full Hand Angular Kinematics Using Electromagnetic Tracking Sensors. IEEE Access, 10. pp. 42673-42689. ISSN 2169-3536
Prabhu, Subramanya R B and Shettigar, Arun Kumar and Herbert, Mervin A and Rao, Srikanth S (2022) Optimization of FSW process parameters for maximum UTS of AA6061/rutile composites using Taguchi technique. Scientia Iranica B, 29 (2). pp. 534-542. ISSN 1026-3098
Doreswamy, Deepak and Shreyas, Sai S and Bhat, Subraya Krishna and Rao, Rajath N (2022) Optimization of material removal rate and surface characterization of wire electric discharge machined Ti-6Al-4V alloy by response surface method. Manufacturing Review, 9 (15). ISSN 2265-4224
Prabhu, Deepa and Hiremath, Pavan and Prabhu, P R and Gowri Shankar, M C (2022) Optimization of the Parameters Influencing the Control of Dual-Phase AISI1040 Steel Corrosion in Sulphuric Acid Solution with Pectin as Inhibitor Using Response Surface Methodology. Protection of Metals and Physical Chemistry of Surfaces, 58 (2). pp. 394-413. ISSN 2070-2051
Shivashankar, H and Rajole, Sangamesh and Pavankumar, S and Mathias, Kevin Amith and Kulkarni, S M (2022) Physico-mechanical behavior of carbon black-infused polymer composite. Bulletin of Materials Science, 45 (6). ISSN 0250-4707
Sadani, Kapil and Nag, Pooja and Pisharody, Lakshmi and Thian, Xiao Yun and Bajaj, Geetika and Mukherji, Suparna and Mukherjia, Soumyo (2022) Polyphenol stabilized copper nanoparticle formulations for rapid disinfection of bacteria and virus on diverse surfaces. Nanotechnology, 33. ISSN 0957-4484
Madival, Abhishek S and Doreswamy, Deepak and Maddasani, Srinivasulu and Shettar, Manjunath and Shetty, Raviraj (2022) Processing, Characterization of Furcraea foetida (FF) Fiber and Investigation of Physical/Mechanical Properties of FF/Epoxy Composite. Polymers for Advanced Technologies, 14 (1476). ISSN 1042-7147
Patro, Abhimanyu Kumar K and Kumar, Maddikuntla Praveen and Acharya, Bibhundendra (2022) An efficient dual-stage pixel-diffusion based multimedia-image encryption using one-type 1D chaotic maps. Sadhana - Academy Proceedings in Engineering Sciences, 47 (161). ISSN 0256-2499
Mohan, Vijay and Nikhil, P and Panjwani, Bharti and Kamath, Dattaguru V (2022) A novel cascaded fractional fuzzy approach for control of fermentation process. Bioresource Technology, 357. ISSN 0960-8524
Suresh, Shilpa and Rajan, Ragesh M and Pushparaj, Jagalingam and Asha, C S and Shyam, Lal and Reddy, Chintala Sudhakar (2021) Dehazing of Satellite Images using Adaptive Black Widow Optimization-based framework. Remote Sensing Applications: Society and Environment, 42 (13). pp. 5068-5086. ISSN 2352-9385
Shettigar, Prajwal J and Lochan, Kshetrimayum and Jeppu, Gautham and Palanki, Srinivas and Indiran, Thirunavukkarasu (2021) Development and Validation of Advanced Nonlinear Predictive Control Algorithms for Trajectory Tracking in Batch Polymerization. ACS Omega, 6. pp. 22857-22865. ISSN 2470-1343
Manohar Shankar, B S and Hiremath, Shivashankarayya and Kulkarni, S M (2021) Effect of ketjenblack and barium titanate on the piezoresistive behaviour of silicone rubber particulate composites. Engineering Research Express, 3. ISSN 2631-8695
Karthik, Aravind and Chiniwar, Dundesh and Das, Mayukh and Pai, Prashanth M and Prabhu, Phalguni and Mulimani, Prashanth and Samanth, Kaustubh and Naik, Nithesh (2021) Electric Propulsion for Fixed Wing Aircrafts – A Review on Classifications, Designs, and Challenges. Engineered Science, 16. pp. 129-145. ISSN 2576-988X
Prabhu, Subramanya R B and Shettigar, Arun Kumar and Herbert, Mervin A and Rao, Srikantha S (2021) Experimental assessment of FSW process to join AA6061/Rutile composite and parametric optimization using TGRA. Engineering Research Express, 3 (3). ISSN 2631-8695
Mathias, Kevin Amith and Hiremath, Shivashankarayya and Kulkarni, S M (2021) Experimental studies on mechanical and dielectric behavior of Glycerol filled Silicone rubber composites. Engineering Research Express. ISSN 2631-8695
Shivashankar, H and Kevin, A M and Manohar, S B S and Kulkarni, S M (2021) Investigation on dielectric properties of PDMS based nanocomposites. Physica B :Physics of Condensed Matter, 602. ISSN 0921-4526
Rane, Pranav Rajendra and Vincent, Shweta (2021) Landslide Susceptibility Mapping Using Machine Learning Algorithms for Nainital, India. Engineered Science, 17. pp. 142-155. ISSN 2576-988X
Hiremath, Shivashnkar and Sangappa, Vidyashree and Rajole, Sangamesh and Kulkarni, Satyabodh M (2021) Numerical Analysis of Polymer Composites for Actuation. Revue des Composites et des Matériaux Avancés-Journal of Composite and Advanced Materials, 30 (5-6). pp. 211-216. ISSN 1169-7954
Prabhu, Subramanya R B and Shettigar, Arun Kumar and Herbert, Mervin A and Rao, Shrikantha S (2021) Parameter investigation and optimization of friction stir welded AA6061/TiO2 composites through TLBO. Welding in the World. ISSN 0043-2288
Koreboina, Vijay Babu and Narasimharaju, B L and Kumar, Vinod D M (2021) Performance investigation on ANFIS and FFNN assisted direct and indirect PV-fed switched reluctance motor water pumping system. International Journal of Modelling and Simulation, 42 (2). ISSN 0228-6203
Singh, Jay Prakash and Koley, Jit and Lochan, Kshetrimayum and Roy, Krishna Binoy (2021) Presence of Megastability and Infinitely Many Equilibria in a Periodically and Quasi-Periodically Excited Single-Link Manipulator. International Journal of Bifurcation and Chaos,, 31 (2). pp. 2130005-1. ISSN 0218-1274
Ravikanth, Dadi and Hariharan, P (2021) Psychophysics Experiment to Check the Temperature Impacts Over Human Fingertips for the Application of Textural Applications in Haptics Technology. Arabian Journal for Science and Engineering. ISSN 1319-8025
Shivashankar, H and Mathias, Kevin Amith and Sondar, Pavan kumar R and Shrishail, M H and Kulkarni, S M (2021) Study on low-frequency dielectric behavior of the carbon black/polymer nanocomposite. Journal of Materials Science: Materials in Electronics. pp. 28674-28686. ISSN 0957-4522
Kumar, Om Prakash and Kumar, Pramod and Ali, Tanweer and Kumar, Pradeep and Vincent, Shweta (2021) Ultrawideband Antennas: Growth and Evolution. Micromechanics, 13. ISSN 2072-666X
Pagaria, Shreyansh and Naik, Nithesh and Shivalingappa, Dundesh and Chiniwar, . and Sooriyaperakasam, Nilakshman and Rathee, Udit (2020) Simulation of Smarter Battery Management System and Charging for Electrical Vehicle Application. Journal of Green Engineering (JGE), 10 (9). ISSN 19044720
Bhiradi, Ishwar and Raju, Leera and Hiremath, Somashekhar S (2020) Adaptive neuro-fuzzy inference system (ANFIS):Modelling, analysis, and optimisation of process parameters in the micro-EDM process. Advances in Materials and Processing Technologies, 6 (1). pp. 133-145. ISSN 2374-0698
Naga, Pooja and Sadani, Kapil and Mukherji, Suparna and Mukherjia, Soumyo (2020) Beta-lactam antibiotics induced bacteriolysis on LSPR sensors for assessment of antimicrobial resistance and quantification of antibiotics. Sensors & Actuators: B. Chemical, 311. ISSN 0925-4005
kanu, Sumit and Khoja, Rohit and Lal, Shyam and Raghavendra, B S and Asha, C S (2020) CloudX-net: A robust encoder-decoder architecture for cloud detection from satellite remote sensing images. Remote Sensing Applications: Society and Environment, 20. ISSN 2352-9385
Bhiradi, Ishwar and Hiremath, Somashekhar S (2020) Energy efficient and cost effective method for generation of in-situ silver nanofluids: Formation, morphology and thermal properties. Advanced Powder Technology, 31. pp. 4031-4044. ISSN 0921-8831
Anuranjeeta, . and sharma, shiru and Sharma, Neeraj and Singh, Munendra and Shukla, K K (2020) Enhancement and segmentation of histopathological images of cancer using dynamic stochastic resonance. International Journal of of Medical Engineering and Informatics, 10. ISSN 1755-0653
Venkatesh, Vishal and Sharma, S S and Singh, Munendra (2020) Intensity inhomogeneity correction of MRI images using InhomoNet. Computerized Medical Imaging and Graphics, 84. ISSN 0895-6111
Hiremath, Shivashnkar and Desai, Sushmita and Kulkarni, Satyabodh M and Karanth, Navin and Desai, Vijay (2020) Investigations on the thermal actuation of carbon black reinforced pdms composite uni-layer and bi-layer cantilever beams. International Journal of Modern Manufacturing Technology, 12 (1). p. 56. ISSN 2067-3604
Kumar, Pramod and Kumar, Om Prakash and Vincent, Shweta and Ali, Tanweer (2020) Modeling of a microstrip fifth order low pass filter for wimax application. Telecommunications and Radio Engineering, 79 (12). pp. 1-9. ISSN 0040-2508
Asha, C S and Munedra, Singh and Shilpa, Suresh and Shyam, Lal (2020) Optimized Dynamic Stochastic Resonance framework for enhancement of structural details of satellite images. Remote Sensing Applications: Society and Environment, 20. ISSN 2352-9385
Singh, Munendra and Venkatesh, Vishal and Verma, Ashish and Sharma, Neeraj (2020) Segmentation of MRI data using multi-objective antlion based improved fuzzy c-means. Biocybernetics and Biomedical Engineering. ISSN 0208-5216
Pagaria, Shreyansh and Naik, Nithesh and Chiniwar, Dundesh and Sooriyaperakasam, Nilakshman and Rathee, Udit (2020) Simulation of Smarter Battery Management System and Charging for Electrical Vehicle Application. Journal of Green Engineering, 10 (9). pp. 5365-5379. ISSN 1904-4720
Venkatesh, Vishal and Sharma, Neeraj and Srivastava, Vivek and Singh, Munendra (2020) Unsupervised smoke to desmoked laparoscopic surgery images using contrast driven Cyclic-DesmokeGAN. Computers in Biology and Medicine, 123. ISSN 0010-4825
Nagarajan, Anandh and Fusic, Julius S (2019) Analysis and Design of LCS Resonant Cell Based Enhanced Zero-Voltage Transition DC-DC Boosting Converter. Serbian Journal of Electrical Engineering, 16 (1). pp. 105-121. ISSN 1451-4869
Vincent, Shweta and Francis, Sharmila Anand John and Raimond, Kumudha (2019) An Analysis of Metaheuristic Algorithms Used for the Recovery of a Failed Antenna Element in an Antenna Array. International Journal on Communications Antenna and Propagation, 9 (6). pp. 409-418. ISSN 2039-5086
Lochan, Kshetrimayum and Roy, B K and Subhudhi, Bidyadhar (2019) Chaotic tip trajectory tracking and deflection suppression of a two-link flexible manipulator using second-order fast terminal SMC. Transaction of the Institute of Measurement and Control, 4 (12). pp. 3392-3308. ISSN 0142-3312
Naik, Nithesh and Prajwal, S (2019) Effect of Splitters in Recirculation Channels on Performance of Turbocharger Compressors Used in Gasoline Engines- A CFD Study. International Journal of Automotive and Mechanical Engineering, 16 (1). pp. 6214-6229. ISSN 2229-8649
Rao, Karthik M C and Malghan, Rashmi L and Arunkumar, S and Rao, Srikanth S and Herbert, Mervin A (2019) An Efficient Approach to Optimize Wear Behavior of Cryogenic Milling Process of SS316 Using Regression Analysis and Particle Swarm Techniques. Transactions of the Indian Institute of Metals, 72 (1). pp. 191-204. ISSN 0972-2815
Shetty, Seemitha and Prabhu, Sumathi and Shetty, Veena and Shetty, Avinash K. (2019) Knowledge, attitudes and factors associated with acceptability of human papillomavirus vaccination among undergraduate medical dental and nursing students in South india. Human Vaccinse and Immunotherapeutics, 15 (7-8). pp. 1656-1665. ISSN 2164-5515
Sadani, Kapil and Nag, Pooja and Mukherjia, Soumyo (2019) LSPR based optical fiber sensor with chitosan capped gold nanoparticles on BSA for trace detection of Hg (II) in water, soil and food samples. Biosensors and Bioelectronics, 134. pp. 90-96. ISSN 0956-5663
Sadani, Kapil and Nag, Pooja and Mukherjia, Soumyo (2019) LSPR based optical fiber sensor with chitosan capped gold nanoparticles on BSA for trace detection of Hg (II) in water, soil and food samples. Biosensors and Bioelectronics, 134. pp. 90-96. ISSN 0956-5663
Naik, Nithesh and Shenoy, Prajwal and Nayak, Nithin and Awasthi, Swetank and Samant, Rashmi (2019) Mesh convergence test for finite element method on high pressure gas turbine disk rim using energy norm: an alternate approach. International Journal Of Mechanical Engineering And Technology, 10 (1). pp. 765-775. ISSN 0976 – 6359
Prabhu, Subramanya R B and Shettigar, Arun Kumar and Herbert, Mervin A and Rao, Shrikantha S (2019) Microstructure and mechanical properties of rutile-reinforced AA6061 matrix composites produced via stir casting process. Transaction of Nonferrous Metals society of China, 29. pp. 2229-2236.
Prabhu, Subramanya R B and Shettigar, Arun Kumar and Herbert, Mervin A and Rao, Shrikantha S (2019) Microstructureevolutionandmechanicalpropertiesoffrictionstir weldedAA6061/rutilecomposite. Materials Research Express, 6. ISSN 2053-1591
Vincent, Shweta and Francis, Sharmila Anand John and Raimond, Kumudha and Ali, Tanweer and Kumar, Om Prakash (2019) A Novel Planar Antenna Array for a Ground-Based Synthetic Aperture Radar. Serbian Journal of Electrical Engineering, 16 (2). pp. 195-209. ISSN 1451-4869
Shivamurthy, B and Doreswamy, Deepak and Nishanth, Joseph and Shivaprasad, H C (2019) Physical and tribo-mechanical properties of waste rubber tyre/epoxy composites. Materials Research Express, 6 (9). ISSN 2053-1591
Mathur, Vidit and Prabhu, Subramanya R B and Patel, Manjunath G C and Shettigar, Arun Kumar (2019) Reinforcement of titanium dioxide nanoparticles in aluminium alloy AA 5052 through friction stir process. Advances in Materials and Processing Technologies, 5 (2). pp. 329-337. ISSN 2374-0698
Vincent, Shweta and Francis, Sharmila Anand John and Raimond, Kumudha and Kumar, Om Prakash (2019) A Study of Types of Sensors Used in Remote Sensing. International Journal of Electronics and Telecommunications, 65 (2). pp. 217-228. ISSN 2081-8491
Lochan, Kshetrimayum and Roy, B K and Subhudi, Bidyadhar (2019) Use of memristive chaotic signal as a desired trajectory for a two-link flexible manipulator using contraction theory based on a composite control technique. The European Physical Journal, 228. pp. 2215-2231. ISSN 1951-6355
Murthy, Amar A and Raghunandana, K (2019) A technical review on the study of stability analysis of Non-circular bearings lubricated with Newtonian/non-newtonian fluids. International Journal of Mechanical and Production, 9 (1). pp. 457-470. ISSN 2249-6890
Dattaprasad, Shetve and Rao, Yedukondala V (2018) A Survey of Various Robot Learning Techniques. International Journal of Pure and Applied Mathematics, 118 (20). ISSN 1314-3395
Srinivas, G and Raghunandana, K and Shenoy, Satish B (2018) Flow blockage in a transonic axial flow compressor: simulation analysis under distorted conditions. International Journal of Engineering and Technology(UAE), 7 (221). pp. 43-49. ISSN 2227-524X
Vincent, Shweta and Francis, Sharmila Anand John and Rajsingh, Elijah Blessing (2018) An Alternate Antenna Array Geometry for a GB-SAR System Used in Landslide Monitoring. Journal of the Indian Society of Remote Sensing, 43 (4). pp. 761-768. ISSN 0255660X
Shintre, Pallavi and Mahapatra, Shweatlana and Vincent, Shweta and Kumar, Om Prakash (2018) An Analysis of Concealed Object Detection Using Decision Tree and Random Forest Algorithms. International Journal of Engineering and Technology(UAE), 7 (4.41). pp. 154-157. ISSN 2227-524X
Shintre, Pallavi and Mahapatra, Shweatlana and Vincent, Shweta and Kumar, Om Prakash (2018) An Analysis of Concealed Object Detection Using Decision Tree and Random Forest Algorithms. International Journal of Engineering and Technology(UAE), 7 (4.41). pp. 154-157. ISSN 2227-524X
Srinivas, G and Raghunandana, K and Shenoy, Satish B (2018) Axial Flow Compressor Analysis under Distorted Phenomena at Transonic Flow Conditions. Cogent Engineering, 5 (1). pp. 1-20. ISSN 2331-1916
Ganesan, Saampras and Bettoli, Avichal and Vincent, Shweta and D’Souza, Sandra (2018) Brain Computer Interface for Multiple Application Control. Journal of Advanced Research in Dynamical and Control Systems, 10 (5). pp. 565-571. ISSN 1943-023X
Sadani, Kapil and Prabhakar, D A P and Nag, Pooja (2018) A Cardio pulmonary resuscitation device for stretchers. International Journal of Engineering and Technology(UAE), 7 (21). pp. 62-65. ISSN 2227-524X
Sinha, Priyanka and Vincent, Shweta and Kumar, Om Prakash (2018) A Comparative Analysis of Machine Learning Models for Prediction of Wave Heights in Large Waterbodies. International Journal of Engineering and Technology(UAE), 7 (4.41). pp. 91-95. ISSN 2227524X
Sinha, Priyanka and Vincent, Shweta and Kumar, Om Prakash (2018) A Comparative Analysis of Machine Learning Models for Prediction of Wave Heights in Large Waterbodies. International Journal of Engineering and Technology(UAE), 7 (4.41). pp. 91-95. ISSN 2227-524X
Shenoy, Prajwal and Shenoy, Praveen K and Khan, Lukhman and Aziz, Sabdar and Afran, Sayed and Kumar, Kamlesh (2018) Design and Development of a novel triphibian quadcopter. International Journal of Engineering and Technology(UAE), 7 (21). ISSN 2227-524X
Potti Srinivasa, Rao and Viswanadhan, K G and Raghunandana, K (2018) Model of Excellence for the Young Self-financing Engineering Colleges in India: Faculty Members’ Perspective. Quality - Access to Success, 19 (162). pp. 73-81. ISSN 1582-2559
Jesna, Sherine V A and Netto, Winston and Ushakumari, S (2018) Nonlinear Adaptive Sliding Mode Control of a Rigid Rotor via Contactless Active Bearing. International Journal of Mechanical Engineering and Robotics Research, 8 (1). pp. 52-58. ISSN 2278-0149
Singh, Munendra and Verma, V and Sharma, N (2018) An Optimized Cascaded Stochastic Resonance for the Enhancement ofBrain MRI. IRBM, 39 (5). pp. 334-342. ISSN 1959-0318
Raghavendra, U and Gudigar, Anjan and Maithri, M and Gertych, Arkadiusz and Meiburger, Kristen M and Yeong, Chai Hong and Madla, Chakri and Kongmebhol, Pailin and Molinari, Filippo and Ng Hoong, Kwan and Acharya, Rajendra U (2018) Optimized multi-level elongated quinary patterns for the assessment of thyroid nodules in ultrasound images. Computers in Biology and Medicine, 95 (1). pp. 55-62. ISSN 0010-4825
Ananthakrishna, T and Kumara, Shama and Maithri, M (2018) Performance Analysis of Isolated Speech Recognition System Using Kannada Speech Database. Pertanika Journal of Science and Technology, 26 (4). pp. 1849-1866. ISSN 01287680
Agarwal, Siddhant and Arora, Sachin and Tarana, Yashashvi and Kumar, Neelotpala (2018) Smart Walking Stick. Journal of Advanced Research in Dynamical and Control Systems, 10 (03). pp. 171-178. ISSN 1943023X
Anarghya, A and Harshith, D N and Rao, Nitish and Nayak, Nagraj S and Gurumurthy, B M and Abhishek, V N and Patil, Ishwar Gouda (2018) Thrust and torque force analysis in the drilling of aramid fibre-reinforced composite laminates using RSM and MLPNN-GA. Heliyon, 4 (7). pp. 1-39. ISSN 2405-8440
Naik, Nithesh and Bhat, Rithesh and Shenoy, Prajwal and George, Varghese and Kowshik, Suhas C S (2018) A study on energy norm as an Alternate approach to mesh Convergence on circumferential disk Dovetail of aircraft engine Compressor. International Journal of Mechanical Engineering and Technology, 9 (13). pp. 1293-1301. ISSN 0976-6340
Shettigar, Arun Kumar (2018) A systematic approach to model and optimize wear behaviour of castings produced by squeeze casting process. Journal of Manufacturing Processes, 32 (4). pp. 199-212. ISSN 1526-6125
Patel, Manjunath G C and Shettigar, Arun Kumar and Krishna, Prasad and Parappagoudar, Mahesh B. (2017) Back propagation genetic and recurrent neural network applicationsin modelling and analysis of squeeze casting process. Applied Soft Computing, 59. pp. 418-437. ISSN 1568-4946
Jacob, Jennifer and Mathew, Robins and Hiremath, Somashekhar S and Bhat, Chandrashekhar (2017) Detection and Tracking of Wheeled Mobile Robot by Image Processing. International Journal of Engineering Research in Mechanical and Civil Engineering, 2 (3). pp. 505-511. ISSN 2456-1290
Malghan, Rashmi L and Rao, Karthik M C and Arunkumar, S (2017) Effect of process parameters in face milling operation and analysis of cutting force using indirect method. Materials and Manufacturing Processes, 33 (5). pp. 1-9. ISSN 1532-2475
Veeranki, Yedukondala Rao B and Paradhasaradhi, Damarla and Reddy, Madan Sankar G and Siva Kumar, Kuppa Pm (2017) Implementation of low power sram cell Structure at deep submicron technologies. Journal of Theoretical and Applied Information Technology, 95 (10). pp. 2182-2190. ISSN 1992-8645
Sarawgi, Disha and Iyer, Vignesh and Pai, Akshatha Rakesh (2017) Improvised power assisted stretchers for hospitals. Advanced Science Letters, 23 (3). pp. 1830-1832. ISSN 1936-6612
Mehndiratta, Adarsh and Breitkopf, Karl Vacili and Reddy, Satish and Gadamsetti, Teja and Pai, Akshatha R (2017) Retrofit Leakage Prevention Using Real-Time Gas Detection and Classification. Advanced Science Letters, 23 (3). pp. 1741-1744. ISSN 1936-6612
Gupta, Avish and Methi, Sagar and Marfatia, Parth and Rao, Yedukondala (2017) Temperature sensing and control of a thermo-electric cooler. International Journal of Pure and Applied Mathematics, 117. pp. 341-344. ISSN 1314-3395
Mannam, Venkata Varunbabu A and Veeranki, Yedukondala Rao B (2016) Design of Narrowband Band Pass Filter using Open-loop Square Resonators with Loading Element. Indian Journal of Science and Technology, 9 (47). pp. 1-9. ISSN 0974-5645
Kini, Achutha U and Sharma, S S and Jagannath, K and Prabhu, P R and Bhat, Chandrashekhar and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2016) Comparative Study of EPHO and CBTC as Corrosion Inhibitors for 15 vol. % 6061 al Alloy/SiCp Composite in 1 M Hydrochloric Acid Medium. International journal of industrial and Mechanical Engineering Sciences, 2 (1). pp. 5-9.
Bhat, Chandrashekhar and Sharma, S S and Jagannath, K and Kini, Achutha U and Pandey, Sunil Kumar and Saravana, Venkatesh and Kumar, Praveen K S (2016) Waste Heat Recovery System for a Heavy Duty Six Cylinder Engine. International Journal of Industril and Mechanical Engineering Sciences, 2 (1). pp. 10-16.
Malghan, Rashmi L and Rao, Karthik M C and Shettigar, Arun Kumar and Rao, Shashikantha and D’Souza, R J (2016) Application of particle swarm optimization and response surface methodology for machining parameters optimization of aluminium matrix composites in milling operation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 38 (8). pp. 37-40. ISSN 1678-5878
Netto, Winston and Jesna, Sherine V A (2016) Ascent Trajectory Optimiztion for the First Stage of a two – Stage – to – Orbit Reusable Launch Vehicle with Load Factor Constraint During re – entry. International Journal of Control Theory and Applications, 9 (39). pp. 223-230. ISSN 09745572
Sachidananda, H K and Raghunandana, K and Shivamurthy, B (2016) Comparison of meshing stiffness of altered tooth sum spur gear tooth with different pressure anglesR. International Journal of Mechanical,Arospace,Industrial, Mechatronic & Manufacturing Engineering, 10 (2). pp. 321-327.
Harsh Mohan, Lal and Bumb, Prateek and Daniel, John and Rao, Yedukondala (2016) Design of Automobiles speed control system using RFID. International Journal of Computer Trends and Technology, 37 (2). pp. 55-59. ISSN 2231-2803
Nag, Pooja and Sadani, Kapil (2016) Factors Governing Gas Sensing Characteristics of some Transition Metal Oxides. International Journal of Control Theory and Applications, 8 (3). pp. 1225-1233. ISSN 09745572
Potti Srinivasa, Rao and Viswanadhan, K G and Raghunandana, K (2016) Roadmaps to Excellence for the Young Self-financing Engineering Colleges in India. Quality - Access to Success, 17 (154). pp. 46-54. ISSN 1582-2559
Sachidananda, H K and Raghunandana, K and Gonsalvis, J (2016) Sliding velocity in profile-corrected gears. Lubrication Science, 29 (1). pp. 43-58. ISSN 0954-0075
Nag, Pooja and Mathew, Ansu and Sadani, Kapil (2016) Speech Transmission Using Ultrasonic Actuation of Piezo Elements for Cochlear Implants. International Science Press, 9 (39). pp. 121-125.
Jesna, Sherine V.A and Netto, Winston (2015) Stabilization and Control of Three Pole Active Magnetic Bearing: A Sliding mode control Approach on Extended System Dynamics. International Journal of Control Theory and Applications, 8 (3). pp. 1041-1051. ISSN 09745572
Prabhu, Subramanya R B and Shettigar, Arun Kumar and Rao, Karthik M C and Nigalye, Akshay and Herbert, Mervin A and Rao, Srikanth S (2015) Effect of process parameters on tensile strength of riction stir Welded al-cu-mg-si-sicp composite. International Journal of Researchers in Biosciences, Agriculture and Technology, 2 (7). pp. 5-10. ISSN 2347 – 517X
Viswanathan, Arjun and Chiniwar, Dundesh and Christopher, J and Rao, Pallanti and Naik, Nithesh (2015) An Intelligent Solid State Switch for Starter Motor as an Alternate Solution to Solenoid with Contact Bouncing Issues. International Journal of Current Engineering and Technology, 5 (5). pp. 3144-3149. ISSN 2277 - 4106
Sharma, S S and Jagannath, K and Bhat, Chandrashekhar and Kini, Achutha U and Prabhu, P R and Gowri Shankar, M C and Jayashree, P K (2015) Age Hardening and Cold Deformation Assisted Aging Treatment on the Characteristics of Quartz Powder Reinforced Stir-Cast Aluminium-Zinc Alloy Metal Matrix Composites. International Journal of Industrial and Mechanical Engineering Sciences, 1 (1). 01-05.
Potti Srinivasa, Rao and Viswanadhan, K G and Raghunandana, K (2015) Best Practices for Quality Improvement—Lessons from Top Ranked Engineering Institutions. International Education Studies, 8 (11). pp. 169-183. ISSN 1913-9020
Sachidananda, H K and Raghunandana, K and Gonsalvis, J (2015) Design of Spur Gears using Profile Modification. Tribology Transactions, 58 (4). pp. 736-744. ISSN 1040-2004
Gurumurthy, B M and Harisha, S R and Prabhu, Subramanya R B and Gangadharan, K V (2015) Design of Virtual Instrumentation approach for A Multi-Purpose online Mechanical Vibration Experiment Using Labview. Journal of Mechanical and Civil Engineering (IOSR-JMCE), 68 (71). pp. 68-71. ISSN 2278-1684
Rao, Karthik M C and Malaghan, Rashmi L and Kumar, Arun S and Rao, Srikantha S (2015) Development of a Prediction Model for Optimized Surface Roughness in Face Milling Operation Using Recurrent Neural Network Technique. International Journal of Applied Engineering Research, 10 (11). pp. 10474-10480. ISSN 0973-4562
Shettigar, Arun Kumar and Prabhu, Subramanya R B and Malghan, Rashmi L and Herbert, Mervin A and Rao, Shrikantha S (2015) Effect of welding parameters on microstructure and mechanical Properties of friction stir welded metal matrix composite. International journal of researches in biosciences, agriculture and technology, 2 (7). pp. 41-45. ISSN 2347 – 517X
Srinivas, CR and Senthilnathan, R and Subhasree, P and Sivaramakrishnan, R and Srividya, R (2015) Evaluation of Statistical Focus Measures in a Parallax Affected SFF-Inspired Approach. IJCTA, 20 (10). pp. 1-11.
George, Anna Merine and Kurian, Ciji Pearl and George, V I and George, Mary Ann (2015) Hardware in Loop Simulation of an Adaptive Traffic Light Control System. International Journal of Applied Engineering Research, 10 (19). pp. 39999-40004. ISSN 0973-4562
Malghan, Rashmi L and Rao, Karthik M C and Kumar, Arun S and Rao, Srikantha S and D'souza, R J (2015) Multiple Response Optimizations in Milling Using Taguchi and Grey Relational Analysis. International Journal of Applied Engineering Research, 10 (11). pp. 10609-10613. ISSN 0973-4562
Senthilnathan, R and Subhasree, P and Sivaramakrishnan, R and Srinivasan, C R and Srividhya, R (2015) Performance Analysis of Focus Measures in a SFF-Inspired Approach for Sparse Scene Reconstruction. IJCTA, 20 (10). pp. 1-11.
Sunil, Kumar and Raghunandana, K (2014) Vibration Analysis of a Piping System Attached With Pumps and Subjected to Resonance. International Journal of Emerging Technology and Advanced Engineering, 4 (9). pp. 1-6. ISSN 2250-2459
Potti Srinivasa, Rao and Viswanadhan, K G and Raghunandana, K (2014) Anempirical study on the performance of self-financing Engineering colleges (autonomous and non-autonomous) - Ateacher’s perspective. International Journal of Management Research and Development, 4 (1). pp. 68-84. ISSN 2248 – 938X
Sachidananda, H K and Raghunandana, K (2014) Effect of Bending and Contact Stresses in Altered Tooth-Sum Gearing. International Journal of Emerging Technology and Advanced Engineering, 4 (9). pp. 7-12. ISSN 2250-2459
Harisha, S R and Prabhu, Subramanya R B and Gangadharan, K V (2014) Implementation of Real Time Condition Monitoring of a Single Degree Freedom System Using Skyhook Control. Journal of Mechanical and Civil Engineering (IOSR-JMCE). pp. 77-80. ISSN 2278-1684
Prabhu, Subramanya R B and Harisha, S R and Gangadharan, K V Design, Synthesis and fabrication of Magneto Rheological Fluid Damper for low Frequency Application. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE). pp. 60-63. ISSN 2278-1684
Raghunandana, K Editorial. STM Journals.
Pansari, Shashank and Mathew, Ansu and Nargundkar, Aniket (2018) An Investigation of Burr Formation and Cutting Parameter Optimization in Micro-drilling of Brass C-360 Using Image Processing. In: Advances in Intelligent Systems and Computing. Springer, singapore, pp. 289-302.
Paious, Melvin and Adhikari, Raviraj and Nagaraja, . (2019) Experimental Investigation on Tapping of Al6061-SiC Metal Matrix Composite with HSS Machine Taps. In: Proceedings of International conference on Computational Fluid Dynamics in Engineering and Health Sciences, 19/12/2015, Malysia.
Vincent, Shweta and Francis, Sharmila Anand John and Kumar, Om Prakash and Raimond, Kumudha (2018) A Comparative Performance Evaluation of Beamforming Techniques for a 2×6 Coaxial Cavity Horn Antenna Array for MELISSA. In: Engineering Vibration, Communication and Information Processing, 09/03/2018, manipal university jaipur.
Nikhil, Myadam and Prakash, Vasu and Pansari, Shashank (2018) Design and Analysis of FSAE Crash Box. In: International Conference on Contemporary Design and Analysis of Manufacturing and Industrial Engineering Systems, 18/01/2018, National Institute of Technology, Trichy.
Vincent, Shweta and Francis, Sharmila Anand John and Kumar, Om Prakash and Raimond, Kumudha (2018) Recovery of a Failed Antenna Element Using Genetic Algorithm and Particle Swarm Optimization for MELISSA. In: Advances in Signal Processing and Intelligent Recognition Systems, 19/09/2018, PES INSTITUTE OF TECHNOLOGY BANGALORE.
Ganesan, Saampras and Bettoli, Avichal and Vincent, Shweta and D’Souza, Sandra (2017) Brain Computer Interface for Multiple Application Control. In: Brain Computer Interface for Multiple Application Control, 03/11/2017, Manipal Institute ofTechnology.
Sadani, Kapil and Prabhakar, D.A.P and Nag, Pooja (2017) A Cardio Pulmonary Resuscitation Device for Stretchers. In: CISCON 2013, 03/11/2017, MIT, Manipal.
Sadani, Kapil and Prabhakar, D A P and Nag, Pooja (2017) A Cardio Pulmonary Resuscitation Device for Stretchers. In: CISCON 2013, 03/11/2017, MIT, Manipal.
Shenoy, Prajwal and Nithesh, Naik and Shettar, Manjunath and Debarghya, . and Abbas, Wasim (2017) Design and Analysis of Split Fixture for Gear Hobbing Machine. In: International Conference on Research in Mechanical Engineering Sciences, 21/12/2017, MIT, Manipal.
Shenoy, Praveen K and Shenoy, Prajwal and Khan, Lukhman and Aziz, Sabdar and Afran, Sayed and Kumar, Kamlesh (2017) Design and development of a novel triphibian quadcopter. In: CISCON 2017, 03/11/2017, Manipal.
Mocherlla, Edwin Paul and Netto, Winston and Jesna, Sherine V A (2017) Design of LQR controller for Ballbot and hardware implementation. In: International Conference on Information Technology and Electrical Engineering, 12/10/2017, Phuket, Thailand.
Mocherlla, Edwin Pau and Netto, Winston and Jensa, Sherine V A (2017) Design of LQR controller for Ballbot and hardware implementation. In: International Conference on Information Technology and Electrical Engineering, 12/10/2017, Phuket, Thailand.
Srinivas, G and Raghunandana, K and Shenoy, Satish B (2017) Flow Blockage in a Transonic Axial Flow Compressor: Simulation Analysis under Distorted Conditions. In: CISCON 2013, 03/11/2017, MIT, Manipal.
Prabhu, Subramanya R B and Murthy, Amar A and Shettigar, Arun Kumar and Herbert, Mervin A and Rao, Shrikantha (2017) Friction stir welding of Aluminium matrix composites – A Review. In: RIMES Internaitonal Conference, 21/12/2017, MiT-Manipal.
Bhiradi, Ishwar and Rai, Anamika and Agrawal, Rajeev (2017) Implementation of advanced planning and Scheduling framework for small scale industry.. In: International conference on agile manufacturing systems ICAM, Dayalbagh Educational Institute, Agra, INDIA, 18/12/2011.
Pansari, Shashank and Mathew, Ansu and Nargundkar, Aniket (2017) An Investigation of Burr formation and cutting parameter optimization in Micro Drilling of Brass C-360 using Image Processing. In: International Conference on Data Engineering and Communication Technology, 06/12/2017, Symbiosis Institute of Technology, Pune.
Khushal, Brahmbhatt and Pai, Akshatha R and Singh, Sanjay (2017) Neural Network Approach for Vision-Based Track Navigation using Low-Powered Computers on MAVs. In: Sixth International Conference on Advances in Computing, Communications and Informatics (ICACCI'17), 2017, Manipal University Manipal.
Bhat, Bharath K and Adhikari, Raviraj and Acharya, Kiran KV (2017) Numerical investigation on human knee joint for verifying Intactness of anterior cruciate ligament. In: International and 18th ISME Conference ISME, 23/02/2017, NIT Warangal, Warangal.
Vincent, Shweta and Francis, Sharmila Anand John and Kumar, Om Prakash and Raimond, Kumudha (2017) Optimization of Gain and Return Loss of a 2 x 6 Planar Coaxial Cavity Horn Antenna Array for MELISSA. In: International Conference on Antenna Innovations &Modern Technologies for Ground, Aircraft and Satellite Applications, 24/11/2017, Sterlings Mac Hotel, Bangalore.
Arora, Sachin and Prabhakar, D A P and Sadani, Kapil (2017) Properties and Applications of Acoustic Metamaterials: A Mini Review. In: CISCON 2013, 03/11/2017, MIT, Manipal.
Koratkar, Prajakta Vinod and Pansari, Shashank (2017) Proportional Integral Derivative controller Tuning application using Ziegler-Nichols method for Automated Plastic Packaging machine. In: International Conference on Applied Science Engineering and Technology, 18/05/2017, sri sairam college of engineering.
Srinivas, G and Raghunandana, K and Shenoy, Satish B (2017) Recent developments in turbomachinery component materials and manufacturing challenges for aero engine applications. In: International Conference on Advances in Metallurgy, Materials and Manufacturing, 06/03/2017, Hotel CJ Pallajio Salem.
Ghag, Nikhil and Pansari, Shashank and Sawant, Himanshu (2017) Root cause analysis of inlet hole and leak off hole operation missing problem in cri body using shainin approach. In: International Conference on Applied Sciences, Engineering & Technology, 10/07/2017, MIT, Manipal.
Goswami, Tanusha and Iyer, Srinivas Ramesh and Singh, Nitesh Kumar and Yadav, Kumud Darshan and Shekar, Spoorthi and Singh, Balbir (2017) Space Debris Removal Using an Automated Capturing and Self Stabilizing System, C.L.E.O. In: International Conference on Mechanical and Aerospace Engineering (ICMAE 2010), 22/07/2017, Prague, Czech Republic.
Jesna, Sherine V A and Ushakumari, S (2017) Stabilization of Three pole Active Magnetic Bearing by Sliding Mode Control Techniques. In: International Conference on Green Technologies (ICGT), 18/12/2012, MBCET, Trivandrum.
Murthy, Amar A and Raghunandana, K (2017) Study of Dimple Effect on the Friction Characteristics of a Journal Bearing using Taguchi Method. In: International Conference on Advances in Metallurgy, Materials and Manufacturing, 06/03/2017, Hotel CJ Pallajio Salem.
Gupta, Avish and Methi, Sagar and Sinha, Rishab and Marfatia, Parth and Rao, Yedukondala (2017) Temperature sensing and control of a Thermo-Electric Cooler. In: International Conference on Internet of Things and Challenges, 14/12/2017, Chennai.
Deep, Akash and Goel, Vasu and Rao, Yedukondala and Reddy, Vivek M (2017) Wireless Smart Automation Using IOT Based Raspberry Pi. In: International Conference on Internet of Things and Challenges, 14/12/2017, Chennai.
Mathew, Ansu and Nag, Pooja and Sadani, Kapil (2017) A non-contact flow monitoring system for rotameters. In: ICARM, 05/05/2017, Srm university,chennai.
Shettigar, Arun Kumar and Prabhu, Subramanya R B and Malghan, Rashmi L and Rao, Srikantha and Herbert, Mervin A (2016) Application of Neural Network for the Prediction of Tensile Properties of Friction Stir Welded Composites. In: Asia Conference on Mechanical and Materials Engineering, 14/07/2016, Malaysia.
Vincent, Shweta and Anand, Sharmila and Francis, John and Kumar, Om Prakash and Blessing, Elijah and Rajsingh, . (2016) A Comparative Study of Horn Antennas suitable for the Transmitting Antenna Array Module of MELISSA Architecture. In: Discover 2016, 13/08/2016, NIT K-Surathkal.
Sachidananda, H K and Raghunandana, K and Shivamurthy, B (2016) Comparison of Meshing Stiffness of Altered Tooth Sum Spur Gear Tooth with Different Pressure Angles. In: International Conference on Aerospace, Mechanical, Automotive and Materials Engineering, 15/02/2016, Barcelona, Spain.
Varghese, Nitin M and Vincent, Shweta and Kumar, Om Prakash (2016) Design and Analysis of Cross-Fed Rectangular Array Antenna; an X-Band Microstrip Array Antenna, Operating At 11 GHz. In: Conference on Advances in Computing, Communications and Informatics (ICACCI), 21 to 24, Sept. 2016, LMNIT Jaipur.
Prabhu, Subramanya R B and Shettigar, Arun Kumar and Rao, Karthik and Rao, Srikanth S and Herbert, Mervin A (2016) Influence of Welding Process Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Aluminium Matrix Composite. In: Asia Conference on Mechanical and Materials Engineering, 14/07/2016, Malaysia.
Sachidananda, H K and Raghunandana, K (2016) Stiffness of an engaging spur gear pair in an altered tooth-sum spur gearing. In: Manipal University Research Colloquium, 04/04/2016, Manipal University.
Krishan, Sabin M P and Milind, Asterix and Kumar, Pavan and Bhiradi, Ishwar (2015) Design and development of 3d scanner with the principal of laser triangulation. In: ISME Conference on Advances in Mechanical Engineering, 03/10/2015, IIT Delhi.
Prabhu, Subramanya R B and Shettigar, Arun Kumar and Rao, Karthik M C and Nigalye, Akshay and Herbert, Mervin A and Rao, Srikanth S (2015) Effect of process parameters on tensile strength of friction stir welded Al-Cu-Mg-Si-SiCp composite. In: International Conference on Science, engineering and Technology, 21/11/2015, Ras Al Khaimah, UAE Dubai.
Herbert, Mervin A and Shettigar, Arun Kumar and Nigalye, Akshay and Rao, Srikanth S (2015) Investigation on microstructure and mechanical properties of Friction Stir Welded AA6061-4.5Cu-10SiC composite. In: iMEC-APCOMS 2015, 12/11/2015, Swiss-Garden Hotel Kuala Lumpur.
Herbert, Mervin A and Shettigar, Arun Kumar and Nigalye, Akshay V and Rao, Shrikantha S (2015) Investigation on microstructure and mechanical properties of Friction Stir Welded AA6061-4.5Cu-10SiC composite. In: iMEC-APCOMS 2015, 12/11/2015, Swiss-Garden Hotel Kuala Lumpur.
Chakravarthy, Kalyana and Raghunandana, K (2015) Stress analysis of glass fibre reinforced composites used in wind turbines. In: Proceedings of 2nd International Conference on Recent Development In Mechanical, Production, Industrial And Automobile Engineering, 25th January 2015, Bangalore.
Harisha, S R and Gowda, Thamme C S and Prabhu, Subramanya R B (2015) Study and Characterization of Magneto Rheological Fluid Damper for vibration Isolation using LabView. In: Proceedings of international conference on International Conference on Engineering and Technology, 29th March-2015 , Panjim, Goa. .
Gurumurthy, B M and Harisha, S R and Prabhu, Subramanya R B (2014) Design of Virtual Instrumentation approach for A Multi-Purpose online Mechanical Vibration Experiment Using Labview. In: Proceedings of international conference on advances in Engineering and Technology, 8th -9th January 2014, Nagpur, Maharashtra.
Prabhu, Subramanya R B and Harisha, S R and Gangadharan, K V (2014) Design, Synthesis and fabrication of Magneto Rheological Fluid Damper for low Frequency Application. In: Proceedings of international conference on advances in Engineering and Technology, 8th -9th January 2014, Nagpur, Maharashtra.
Harisha, S R and Prabhu, Subramanya R B and Gangadharan, K V (2014) Implementation of Real Time Condition Monitoring of a Single Degree Freedom System Using Skyhook Control. In: Proceedings of international conference on advances in Engineering and Technology, 8th -9th January 2014, Nagpur, Maharashtra.
Prabhu, Subramanya R B and Harisha, S R (2014) Study of Multi agent behaviour of Autonomous Robots. In: International conference on advances in engineering and technology , 2014.
Bhiradi, Ishwar and Pillai, Ajesh J (2014) Tool inventory management using rfid technology. In: All India Manufacturing Technology, Design, and Research Conference, 12/12/2014, IIT Guwahati.
Bhiradi, Ishwar and Singh, B K (2014) Work measurement approach for productivity Improvement in a heavy machine shop. In: International & 26th All India Manufacturing Technology, Design, and Research Conference, 12/12/2014, IIT Guwahati.
Prabhu, Subramanya R B (2013) Maze Searching with Multiple Autonomous Robots. In: International Conference on Emerging Trends in Engineering, 15 and 16 May 2013, NITTE Karnataka.
Bhiradi, Ishwar and Singh, B K (2013) Monte-carlo simulation technique implementation for Productivity improvement in the heavy machine shop. In: International Conference on Production and Industrial Engineering, 29/03/2013, NIT Jalandhar.
Bhiradi, Ishwar and Bhiradi, Shridhar and Singh, B K (2012) Finite element analysis on the mechanical properties of Forged a356 alloy. In: P r o c e s s i n g a n d F a b r i c a t i o n o f A d v a n c e d M a t e r i a l s – X X I, 10/12/2012, IIT Guwahati..
Bhiradi, Ishwar and Bhiradi, Shridhar and Singh, B K (2012) Finit