Items where Author is "Gurumurthy, B M"
Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 42.

Article

Prabhu, P R and Hiremath, Pavan and Prabhu, Deepa and Gowrishankar, M C and Gurumurthy, B M (2021) Chemical, electrochemical, thermodynamic and adsorption study of EN8 dual‑phase steel with ferrite‑martensite structure in 0.5 M H2SO4 using pectin as inhibitor. Chemical Papers, 75. pp. 6083-6099. ISSN 0366-6352

Kowshik, Suhas C S and Gowri Shankar, M C and Shettar, Manjunath and Bhat, Ritesh R and Gurumurthy, B M (2021) Durability prediction analysis on mechanical properties of GFRP upon immersion in water at ambient temperature. Cogent Engineering. ISSN 2331-1916

Hegde, Ananda and Gurumurthy, B M and Hindi, Jamaluddin and Sharma, S S and Gowri Shankar, M C (2021) Effect of austempering temperature and manganese content on the impact energy of austempered ductile iron. Cogent Engineering, 8. ISSN 2331-1916

Gurumurthy, B M and Hindi, Jamaluddin and Kini, Achutha U and Sharma, S S (2021) Investigation and analysis of aging behavior and tensile fracture study on precipitation hardened al7075-white cast iron particulate reinforced composites. Cogent Engineering, 8 (1). ISSN 2331-1916

Harisha, S R and Sharma, S S and Kini, Achutha U and Gurumurthy, B M and Hegde, Ananda (2021) Micro-hardness variation of micro-phases during spheroidisation of AISI4340 steel. Cogent Engineering. ISSN 2331-1916

Hiremath, Pavan and Sharma, S S and Gowri Shankar, M C and Shettar, Manjunath and Gurumurthy, B M (2020) Effect of post carburizing treatments on residual stress distribution in plain carbon and alloy steels – A numerical analysis. Journal of Materials Research and Technology, 9 (20). pp. 8439-8450. ISSN 2238-7854

Gurumurthy, B M and Shivaprakash, Y M and Sharma, S S and Kini, Achutha U (2020) Mechanical characterization of dual phase and austempered Aisi 1040 normalized steel. International Journal of Mechanical and Production, 10 (2). pp. 247-258. ISSN 2249-6890

Gurumurthy, B M and Gowri Shankar, M C and Sharma, S S and Kini, Achutha U and Shettar, Manjunath and Hiremath, Pavan (2020) Microstructure authentication on mechanical property of medium carbon Low alloy duplex steels. Journal of Materials Research and Technology, 9 (3). pp. 5105-5111. ISSN 2238-7854

Sharma, S S and Gurumurthy, B M and Gowri Shankar, M C and Kini, Achutha U and Shettar, Manjunath and Hiremath, Pavan (2019) Aging Kinetics and Microstructural Features of Al6061-SiC+B4C Stir Cast Hybrid Composites. International Journal of Automotive and Mechanical Engineering, 16 (4). pp. 7211-7224. ISSN 2229-8649

Gurumurthy, B M and Sharma, S S and Vikas, Ramakrishna S and Kini, Achutha U (2019) Mechanical Characterization and Microstructural Analysis of AISI 4340 Ferrite-Martensite Dual Phase Steel. International Journal of Mechanical Engineering and Robotics Research, 8 (7). pp. 553-558. ISSN 2278-0149

Shivaprakash, Y M and Gurumurthy, B M and Siddhartha, M A and Kumar, Siddesh N M and Dutta, Avishek (2019) Studies on mild steel particulates reinforced Duralumin composite fabricated through Powder metallurgy route. International Journal of Mechanical and Production, 9 (2). pp. 903-920. ISSN 2249-6890

Gowri Shankar, M C and Shivapraksh, G and Jayashree, P K and Gurumurthy, B M (2019) Study on tensile strength on Artificially aged al-mg-si alloy using Taguchi’s technique. International Journal of Mechanical Engineering and Technology, 10 (1). pp. 1312-1320. ISSN 0976-6340

Hindi, Jamaluddin and Gurumurthy, B M and Sharma, S S and Gowri Shankar, M C and Jain, Novakar and Muralidhar, Madhukar (2018) Analytical study on the effect of Copper and nickel in austempered Ductile iron using analysis of Variance. International Journal Of Mechanical Engineering And Technology, 9 (8). pp. 286-295. ISSN 0976 – 6359

Gurumurthy, B M and Sharma, S S and Kini, Achutha U and Mansoor, Syed Insiyath (2018) Effect of preheat treatment structure On mechanical characterization of aisi 4340 ferrite bainite dual phase steel. International Journal Of Mechanical Engineering And Technology, 9 (8). pp. 84-89. ISSN 0976 – 6359

Gurumurthy, B M and Hindi, Jamaluddin and Rajbafna, . (2018) Experimental study on mechanical Behaviour of as cast aluminium 7075 Matrix reinforced with al2o3. International Journal Of Mechanical Engineering And Technology, 9 (7). pp. 1477-1484. ISSN 0976 – 6359

Gurumurthy, B M and Sharma, S S and Kini, Achutha U and Hegde, Ananda and Patil, Ajinkya (2018) Mechanical characteristics evaluation of dual phase and related hardening techniques on AISI 4340 steel. Journal of Mechanical Engineering and Sciences, 12 (4). pp. 4018-4029. ISSN 2289-4659

Anarghya, A and Harshith, D N and Rao, Nitish and Nayak, Nagraj S and Gurumurthy, B M and Abhishek, V N and Patil, Ishwar Gouda (2018) Thrust and torque force analysis in the drilling of aramid fibre-reinforced composite laminates using RSM and MLPNN-GA. Heliyon, 4 (7). pp. 1-39. ISSN 2405-8440

Gurumurthy, B M and Sharma, S S and Kini, Achutha U (2017) Ferrite-Martensite Dual Phase Treatment of AISI 1040 Steel and Mechanical Characterization. Key Engineering Materials, 748. pp. 280-283. ISSN 1013-9826

Gowri Shankar, M C and Sharma, S S and Kini, Achutha U and Hiremath, Pavan and Gurumurthy, B M (2017) Microstructure and fracture behaviour of two stage stir cast Al6061-SiC composites. Journal of Materials and Environmental Science, 8 (1). pp. 257-263. ISSN 2028-2508

Gowri Shankar, M C and Sharma, S S and Kini, Achutha U and Jayashree, P K and Gurumurthy, B M (2016) Study of Wear Behavior and Mechanical Mixed Layer on Artificial Aged Al6061 Composite Reinforced with B4C Particles. Indian Journal of Science and Technology, 9 (12). ISSN 0974-6846

Mehta, Darshan Bhavesh and Sharma, S S and Gurumurthy, B M and Bairy, Kishan S and Dsouza, Eril Joy and Mendonca, Antony Prajwal (2016) Characteristic Study and Comparison of Different Hardening Methods on Low-Alloy Medium-Carbon Spring Steel. International Journal of Applied Engineering Research, 11 (2). pp. 1542-1547. ISSN 0973-4562

Anarghya, A and Yatheesha, R B and Gurumurthy, B M and Nitish, R and Ranjith, B S (2016) Drill-Ability Studies of Laser Drilled Micro Holes on CFRP Composites. New Developments in Biology, Biomedical & Chemical Engineering and Materials Science, 2. pp. 11-17. ISSN 978-1-6180

Shivaprakash, Y M and Jayashree, P K and Gowri Shankar, M C and Gurumurthy, B M and Hiremath, Anupama and Prasad, Sreenivasa K V (2016) Experimental Studies on Heat Treated AA6061+GCI Composite. Indian Journal of Science and Technology. ISSN 0974-6846

Prabhu, Sandesh M and Kini, Achutha U and Sharma, S S and Gurumurthy, B M (2016) Heat treatment and mechanical characterisation Of dual phase (ferrite-martensite) medium carbon Low alloy steels. International Journal For Technological Research In Engineering, 3 (8). pp. 1776-1779. ISSN 2347 - 4718

Gowri Shankar, M C and Sharma, S S and Kini, Achutha U and Shivaprakash, Y M and Gurumurthy, B M (2016) Influence of artificial aging on the stir cast al6061-sic metal matrix composites under different aging conditions. International Journal of Technology, 7 (6). pp. 1000-1008. ISSN 2086-9614

Anarghya, M and Nitish, S R and Yatheesha, R B and Gurumurthy, B M and Ranjith, B S (2016) Investigation of CO2 Laser Drilled Micro Holes for Heat Affected Zone and Structural Integrity in CFRP Composites. International Journal of Materials, 3. pp. 33-43. ISSN 2313-0555

Gurumurthy, B M and Hiremath, Anupama and Shivaprakash, Y M and Gowri Shankar, M C and Jayashree, P K (2016) Self- Healing Materials, A New Era In Material Technology: A Review. International Journal of Applied Engineering Research, 11 (2). pp. 1934-1399. ISSN 0973-4562

Gurumurthy, B M and Sharma, S S and Gowri Shankar, M C and Sowmith, . and Abhishek, . and Abhishek, Devar (2016) Study of Mechanical Properties of Dual Phase EN19 Steel (AISI4140). Indian Journal of Science and Technology, 9 (37). pp. 37-42. ISSN 0974-6846

Gurumurthy, B M and Sharma, S S and Gowri Shankar, M C and Walia, Romit and Agarwal, Tanishq (2016) Study on Dual-Phase Structure of AISI4140 Steel. Indian Journal of Science and Technology, 9 (33). ISSN 0974-6846

Shivaprakash, Y M and Gurumurthy, B M and Gowri Shankar, M C and Sharma, S S and Kini, Achutha U (2015) Comparative studies on mechanical properties of aisi 4340 high-strength alloy steel under time- quenched and austempered conditions. International Journal of Research in Engineering and Technology (IJRET), 4 (2). pp. 530-535. ISSN 2277 – 4378

Gurumurthy, B M and Harisha, S R and Prabhu, Subramanya R B and Gangadharan, K V (2015) Design of Virtual Instrumentation approach for A Multi-Purpose online Mechanical Vibration Experiment Using Labview. Journal of Mechanical and Civil Engineering (IOSR-JMCE), 68 (71). pp. 68-71. ISSN 2278-1684

Gowri Shankar , M C and Jayshree, BS and Shivaprakash, Y M and Gurumurthy, B M and Shettar, Manjunath and Sharma , S S (2015) Machinability study on turning of ti-6al-4v alloy under high Pressure cooling using neat oil & water soluble oil. Global Journal of Engineering Science and Research Management, 2 (6). pp. 169-181. ISSN 2349-4506

Shivaprakash, Y M and Gurumurthy, B M and Sharma, S S and Jayashree, P K and Gowri Shankar, M C (2015) Production, testing and microstructural investigation on Fly ash reinforced Aluminium alloy matrix composite. International Journal of Applied Engineering Research, 10 (20). pp. 41583-41590. ISSN 0973-4562

Anarghya, A and Gurumurthy, B M and Sharma , S S and Nitish, R and Yathish, R B (2014) Manual Stir Cast Processing Method, Hardness and Compression Characteristics of Quartz Reinforced Al Metal Matrix Composites. International journal of engineering sciences & research Technology, 3 (10). ISSN 2277-9655

Book Section

Shivaprakash, Y M and Gurumurthy, B M and Sharma, S S and Jayashree, P K and Gowri Shankar, M C (2017) Production, Testing and Microstructural Investigation on Fly ash Reinforced Aluminium Alloy Matrix Composite. In: Advanced Engineering Research and Applications 79. Research India Publications, pp. 78-98.

Conference or Workshop Item

Gurumurthy, B M and Sharma, S S and Kini, Achutha U (2017) Ferrite-Bainite Dual Phase Structure and Mechanical Characterization of AISI 4340 Steel. In: IConAMMA_2017, 17/08/2017, amruth school of engineering bangalore.

Gurumurthy, B M and Sharma, S S and Kini, Achutha U (2017) Ferrite-martensite dual phase treatment of AISI 1040 steel and mechanical characterization. In: International Conference on Advanced Materials and Building Materials, 21/04/2017, Kuala Lumpur, Malaysia.

Murthy, Amar A and Rakesh, L and Gurumurthy, B M and Hattangady, Vikram Harin and Puri, Suneet Singh (2016) Development of Cost Effective Chassis Dynamometer for Engine Output Power Measurements. In: International Conference on Advances in Mechanical and Robotics Engineering, june 12th 2014, Institute of Research Engineers and Doctors, Malys.

Gurumurthy, B M and Sharma, S S and Gowri Shankar, M C and Kini, Achutha U and Shivaprakash, Y M (2016) Mechanical Characteristics Evaluation of Conventional and Special Hardening Treatments on AISI 4340 Steel. In: international conference on current research in Mechanical, Mechatronics, Robotics and Civil Engineering, 16/12/2016, singapore.

Gurumurthy, B M and Murthy, Amar A and Hindi, Jamaluddin and Sharma , S S and Kini, Achutha U (2015) Characteristics Evaluation of Normalized and Conventionally Hardened AISI 4340 steel. In: 5th International Conference on Automotive, Mechanical and Materials Engineering, August 16-17, 2015, Bali (Indonesia).

Hindi, Jamaluddin and Kini, Achutha U and Sharma , S S and Gurumurthy, B M and Gowri Shankar , M C (2015) Mechanical Characterization of Stir Cast Al 6063 Matrix SiC Reinforced Metal Matrix Composites. In: 5th International Conference on Automotive, Mechanical and Materials Engineering, August 16-17, 2015, Bali (Indonesia).

Gurumurthy, B M and Harisha, S R and Prabhu, Subramanya R B (2014) Design of Virtual Instrumentation approach for A Multi-Purpose online Mechanical Vibration Experiment Using Labview. In: Proceedings of international conference on advances in Engineering and Technology, 8th -9th January 2014, Nagpur, Maharashtra.

This list was generated on Wed Jan 19 22:02:09 2022 UTC.