Items where Author is "Jagannath, K"
Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 80.

Article

Dinesha, P and Jagannath, K and Mohanan, p (2018) Effect of varying 9-Octadecenoic acid (oleic fatty acid) content in biofuel on the performance and emission of a compression ignition engine at varying compression ratio. Biofuels, 09 (04). pp. 441-448. ISSN 1759-7269

Dinesha, P and Jagannath, K (2018) Comparison of Performance and Emission Characteristics of Biofuel and Diesel Fired Engine. Distributed Generation and Alternative Energy Journal, 33 (4). pp. 68-77. ISSN 2156-3306

Dinesha, P and Jagannath, K (2018) Comparison of Performance and Emission Characteristics of Biofuel and Diesel Fired Engine. Distributed Generation and Alternative Energy Journal, 33 (4). pp. 68-77. ISSN 2156-3306

Jagannath, K and Dinesha, P (2017) Performance Comparison of Phase Change Materials for Thermal Energy Storage. Materials Science Forum, 909. pp. 231-236. ISSN 1662-9752,

Kini, Achutha U and Sharma, S S and Jagannath, K and Prabhu, P R and Bhat, Chandrashekhar and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2016) Comparative Study of EPHO and CBTC as Corrosion Inhibitors for 15 vol. % 6061 al Alloy/SiCp Composite in 1 M Hydrochloric Acid Medium. International journal of industrial and Mechanical Engineering Sciences, 2 (1). pp. 5-9.

Prabhu, P R and Sharma, S S and Jagannath, K and Gowri Shankar, M C and Kini, Achutha U and Kulkarni, S M (2016) Design of Experiment Based Approach to Optimize Turn-Assisted Deep Cold Rolling Process Parameters. International Journal of Industrial and Mechanical Engineering Sciences, 2 (1). pp. 17-23.

Bhat, Chandrashekhar and Sharma, S S and Jagannath, K and Kini, Achutha U and Pandey, Sunil Kumar and Saravana, Venkatesh and Kumar, Praveen K S (2016) Waste Heat Recovery System for a Heavy Duty Six Cylinder Engine. International Journal of Industril and Mechanical Engineering Sciences, 2 (1). pp. 10-16.

Jagannath, K and Sharma, S S and Prabhu, P R and Gowri Shankar, M C and Harisha, S R (2016) Effect of Artificial Aging on Fracture Behavior of Al6061-Silica (SiO2) Composites. Materials Science Forum, 880 (1). pp. 59-62. ISSN 1662-9752

Ghosh, Madhurima and Santhosh, R and Das, S K and Das, G and Mahato, B and Jagannath, K and Kumar, S and Singh, P K (2016) Effect of Structural Heterogeneity on In Situ Deformation of Dissimilar Weld Between Ferritic and Austenitic Steel. Metallurgical and Materials Transactions, 46 (8). pp. 3555-3568. ISSN 1073-5623

Santhosh, R and Singh, P K and Das, G and Jagannath, K and Das, S K and Kumar, S and Ghosh, Madhurima (2016) Effect of different parameters on uncertainty during evaluation of strength of dissimilar metal weld. Materialwissenschaft und Werkstofftechnik, 47 (9). pp. 845-851. ISSN 0933-5137

Sharma, S S and Jagannath, K and Prabhu, P R and Gowri Shankar, M C and Harisha, S R and Kini, Achutha U (2016) Metallography & Bulk Hardness of Artificially Aged Al6061-B4C-SiC Stir Cast Hybrid Composites. Materials Science Forum, 880 (1). pp. 140-143. ISSN 1662-9752

Prabhu, Raghavendra and Sharma, S S and Jagannath, K and Kumar, Krishna and Kulkarni, S M (2016) Surface Improvement of Shafts by Turn-Assisted Deep Cold Rolling Process. MATEC Web of Conferences, 77 (10006). pp. 1-4. ISSN 2261-236x

Santhosh, R and Das, S K and Das, G and Jagannath, K and Kumar, S and Singh, P K and Ghosh, Madhurima (2016) Three-Dimensional Thermomechanical Simulation and Experimental Validation on Failure of Dissimilar Material Welds. Metallurgical and Materials Transactions, 47A (5). pp. 1-11. ISSN 1073-5623

Ghosh, MK and Santhosh, R and Das, S K and Mahato, B and Jagannath, K and Kumar, S and Singh, P K (2015) Effect of Structural Heterogeneity on In Situ Deformation of Dissimilar Weld Between Ferritic and Austenitic Steel. Metallurgical and Materials Transactions, 46A (6). pp. 2323-2792. ISSN 1073-5623

Sharma, S S and Jagannath, K and Bhat, Chandrashekhar and Kini, Achutha U and Prabhu, P R and Gowri Shankar, M C and Jayashree, P K (2015) Age Hardening and Cold Deformation Assisted Aging Treatment on the Characteristics of Quartz Powder Reinforced Stir-Cast Aluminium-Zinc Alloy Metal Matrix Composites. International Journal of Industrial and Mechanical Engineering Sciences, 1 (1). 01-05.

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K and Kini, Achutha U (2015) Analysis of Surface Hardness, Surface Roughness, and Near Surface Microstructure of AISI 4140 Steel Worked with Turn-Assisted Deep Cold Rolling Process. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9 (6). pp. 999-1005.

Kini, Achutha U and Sharma, S S and Jagannath, K and Prabhu, P R and Gowri Shankar, M C (2015) Characterization Study of Aluminium 6061 Hybrid Composite. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 9 (6). pp. 578-582.

Sharma , S S and Prabhu, P R and Jagannath, K and Kini, Achutha U and Gowri Shankar , M C (2015) Enhancement of Hardness Related Properties of Grey Cast Iron Powder Reinforced AA7075 Metal Matrix Composites through T6 and T8 Heat Treatments. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 9 (6). pp. 675-681.

Jagannath, K and Kotian, Akhilesh and Sharma , S S and Kini, Achutha U and Prabhu, P R (2015) Investigation of Bubble Growth during Nucleate Boiling Using CFD. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9 (6). pp. 988-992.

Sharma , S S and Jagannath, K and Prabhu, P R and Gowri Shankar , M C (2014) Mechanical property assessment of austempered and Conventionally hardened AISI 4340 Steel. International Journal Of Mechanical Engineering And Technology , 5 (9). 08-14. ISSN 0976 – 6359

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K (2014) Surface layer alterations in AISI 4140 steel from turn-assisted deep cold rolling process. International Journal Of Mechanical Engineering And Technology , 5 (9). pp. 245-250. ISSN 0976 – 6359

Jagannath, K and Lobo, Princeton (2014) Performance Evaluation of Thermoacoustic Refrigeration System. Journal of Refrigeration, Air Conditioning, Heating and Ventilation, 1 (1). pp. 22-29.

Jagannath, K and Sharma , S S and Mohan, N S and Prabhu, P R (2013) Characteristic study for low melting point MMC using stir casting technique. World Journal of Engineering, 10 (6). pp. 529-534. ISSN 1708-5284

Kini, Achutha U and Jagannath, K and Sharma , S S and Bhat, Chandrashekhar and Shetty, Prakash and Shetty, Divakara S (2013) Effect of Ethyl-2-phenyl-hydrozono-3-oxobutyrate on the Corrosion inhibition of AA 6061 in HCl medium. International Journal of Research in Engineering and Technology (IJRET), 2 (3). pp. 132-136. ISSN 2277 – 4378

Sharma , S S and Jagannath, K and Bhat, Chandrashekhar and Kini, Achutha U and Prabhu, P R and Jayashree, P K and Gowri Shankar , M C (2013) Improvement in Mechanical Properties of AISI 4147 Spring Steel through Heat Treatment Technique. International Journal of Research in Engineering and Technology (IJRET), 2 (3). pp. 127-131. ISSN 2277 – 4378

Jagannath, K and Sharma , S S and Bhat, Chandrashekhar and Kini, Achutha U and Prakash, Prannoy (2013) Low cost traction control system for two wheeler. International Journal of Research in Engineering and Technology (IJRET), 2 (3). ISSN 2277 – 4378

Sharma , S S and Jagannath, K and Prabhu, P R (2013) Microstructure and Mechanical Characterization of Heat Treated Stir Cast Silica (Sea Sand) Reinforced 7XXX Al Alloy MMCs. World Academy of Science, Engineering and Technology, 7 (1). pp. 1356-1361. ISSN 2010-3778

Bhat, Chandrashekhar and Deepak, P D and Ramakumar, B V N and Jagannath, K and Sharma , S S and Kini, Achutha U (2013) Numerical Investigation of Heat Transfer Characteristics of Nozzle Ribs in a Gas Turbine Blade. International Journal of Research in Engineering and Technology (IJRET), 2 (5). pp. 209-217. ISSN 2277 – 4378

Jagannath, K (2012) Evaluation of Critical speed of Generator rotor with external load. International Journal of Engineering Research and Development, 1 (11). pp. 11-16. ISSN 2278-067X

Jagannath, K (2012) Performance Evaluation of a Solar Drier with concentrator. Cooling India, 8 (3). pp. 32-35.

Jagannath, K (2012) Prediction of Inter-Laminar stresses in composite laminates using mixed finite element model. International Journal of Management, IT and Engineering, 2 (5). pp. 325-338. ISSN 2249-0558

Sharma , S S and Jagannath, K and Bhat, Chandrashekhar and Prabhu, P R (2012) Cold Deformation Effect on the Conventionally Aged Stircast Iron Powder Reinforced Aluminum Alloy Metal Matrix Composites. International Journal of Research in Engineering and Technology, 1 (3). ISSN 2277 – 4378

Bhat, Chandrashekhar and Anoop, A D and Gopinath, K and Jagannath, K and Sharma , S S and Prabhu, P R (2012) Surface Failure and Fatigue Life investigation of Boron Steel. International Journal of Research in Engineering and Technology, 1 (3). pp. 167-171. ISSN 2277 – 4378

Jagannath, K (2011) Performance analysis of atmospheric water generator. Cooling India , 7 (5). pp. 30-31.

Jagannath, K (2010) Effect of roughness on journal Bearing performance with non-Newtonian fluids. Journal of Mechanical Engineering, 7 (1). pp. 1-13. ISSN 1823-5514

Bhat, Chandrashekhar and Sharma , S S and Jagannath, K and Mohan, N S and Sathisha, S G (2010) Design and Analysis of a Expansion Chamber Mufflers. World Journal of Engineering, 7 (3). pp. 117-118. ISSN 1708-5284

Mohan, N S and Jagannath, K and Sharma , S S and Bhat, Chandrashekhar (2010) Optimization of drilling conditions of Glass fibre reinforced plastic composite material using genetic algorithm. World Journal of Engineering, 7 (2). pp. 811-812. ISSN 1708-5284

Bhat, Chandrashekhar and Sharma , S S and Jagannath, K and Mohan, N S and Sathisha, S G (2010) Prediction of Sound Attenuation Characteristics of Mufflers. World Journal of Engineering, 7 (3). pp. 115-116. ISSN 1708-5284

Jagannath, K and Sharma , S S and Mohan, N S and Prabhu, P R (2010) Stir Casting Technique for low Melting point Metal Matrix Composites and Characteristic study. World Journal of Engineering, 7 (3). pp. 511-5121. ISSN 1708-5284

Sharma , S S and Jagannath, K and Mohan, N S and Bhat, Chandrashekhar and Prabhu, P R and Chadaga, R C (2010) Thermomechanical and Precipitation Hardening of Stir-Cast Silica Reinforced Aluminium alloy Matrix Composites. World Journal of Engineering, 7 (3). pp. 1007-1008. ISSN 1708-5284

Jagannath, K and Raghunandana, K and Chincholkar, A M (2007) Performance Characteristics of Two Lobe Bearings Operating with Non Newtonian Lubricants. Journal of Solid Mechanics and Materials Engineering, 1 (4). pp. 421-430. ISSN 1880 – 9871

Jagannath, K and Raghunandana, K and Chincholkar, A M (2007) Performance Characteristics of Two-Lobe bearings operating with non-Newtonian Lubricants. Journal of Solid Mechanics and Materials Engineering, 1 (4). pp. 421-430. ISSN 1880 – 9871

Jagannath, K and Raghunandana, K and Chincholkar, A M (2006) Performance Characteristics of two lobe bearings operating with non- Newtonian Lubricants. Journal of Solid Mechanics and Materials Engineering. pp. 421-430. ISSN 1880 – 9871

Jagannath, K and Raghunandana, K and Chincholkar, A M (2004) Thermo hydrodynamic Analysis of steadily Loaded Journal Bearings. Journal of The Institution of Engineer (India) , 85. pp. 131-137. ISSN 0020 – 3408

Jagannath, K and Raghunandana, K and Chincholkar, A M (2004) Thermodynamic analysis of Steadily loaded Journal Bearings. Journal of the Institution of Engineers (India) Mechanical Engineering Division, 85. pp. 131-137. ISSN 0020-3408

Conference or Workshop Item

Dinesha, P and Jagannath, K and Nayak, Vighnesha and Mohanan, p (2017) Influence of higher injection pressure on the performance and emission characteristics of a Diesel engine fueled by Biofuel. In: 8th International Science, Social Science, Engineering and Energy Conference, 15th-17th March,2017,, Thailand.

Dinesha, P and Jagannath, K (2017) Performance analysis of Portable solar Areca nut (Areca catechu L.) dryer. In: International Conference on Researches in Science & Technology, 14/07/2017, Bali, Indonesia.

Jagannath, K and Dinesha, P (2017) Performance comparison of Phase Change Materials for Thermal Energy Storage. In: Asia Conference on Mechanical and Materials Engineering, 09/06/2017, Tokyo, Japan.

Sharma, S S and Gowri Shankar, M C and Kini, Achutha U and Jagannath, K and Prabhu, P R (2016) Aging and Mechanical Characteristics of Precipitation Hardening Stir cast Al6061 Hybrid Composite. In: International multidisciplinary research conference, 02/02/2016, Colombo.

Jagannath, K and Sharma, S S and Prabhu, P R and Gowri Shankar, M C and Harisha, S R (2016) Effect of Artificial aging on Fracture behavior of Al6061- Silica (SiO2) composites. In: 4th Asia conference on Mechanical and Materials Engineering, 14/07/2016, Kuala Lumpur, Malaysia.

Kini, Achutha U and Sharma, S S and Jagannath, K (2016) Effect of the Process Parameters on Build Time in Fused Deposition Modeling using Taguchi Method. In: International multidisciplinary research conference, 02/02/2016, Colombo.

Sharma, S S and Jagannath, K and Prabhu, P R and Gowri Shankar, M C and Harisha, S R and Kini, Achutha U (2016) Metallography & Bulk Hardness of Artificially Aged Al6061-B4C-SiC Stir Cast Hybrid Composites. In: 4th Asia conference on Mechanical and Materials Engineering, 14/07/2016, Kuala Lumpur, Malaysia.

Jagannath, K and Gupta, Archith and Sharma, S S and Kini, Achutha U (2016) Performance enhancement of refrigerator with de-superheater. In: International multidisciplinary research conference, 02/02/2016, Colombo.

Prabhu, Raghavendra and Sharma, S S and Jagannath, K and kumar, krishna P (2016) Surface Improvement of Shafts by Turn-Assisted Deep Cold Rolling Process. In: 4th Asia conference on Mechanical and Materials Engineering, 14/07/2016, Kuala Lumpur, Malaysia.

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K and Kini, Achutha U (2015) Analysis of Surface Hardness, Surface Roughness and Near Surface Microstructure of AISI 4140 Steel Worked with Turn-Assisted Deep Cold Rolling Process. In: International Conference on Mechanical, Aeronautical and Manufacturing Engineering, June 4-5, 2015, New York, USA.

Kini, Achutha U and Sharma , S S and Jagannath, K and Prabhu, P R and Gowri Shankar , M C (2015) Characterization Study of Aluminium 6061 Hybrid Composite. In: International Conference on Mechanical,Aeronautical and Manufacturing Engineering, June, 4-5, 2015, New York, USA.

Jagannath, K and Kotian, Akhilesh and Sharma , S S and Kini, Achutha U and Prabhu, P R (2015) Investigation of Bubble Growth During Nucleate Boiling Using CFD. In: International Conference on Mechanical,Aeronautical and Manufacturing Engineering, June, 4-5, 2015, New York, USA.

Sharma , S S and Prabhu, P R and Jagannath, K and Kini, Achutha U and Gowri Shankar , M C (2015) Enhancement of Hardness Related Properties of Grey Cast Iron Powder Reinforced AA7075 Metal Matrix Composites through T6 and T8 Heat Treatments. In: International Conference on Mechanical, Aeronautical and Manufacturing Engineering, June 4-5, 2015, New York, USA.

Sharma, S S and Jagannath, K and Bhat, Chandrashekhar and Kini, Achutha U and Prabhu, P R and Jayashree, P K and Gowri Shankar, M C (2014) Age Hardening and Cold Deformation Assisted Aging Treatment on the Characteristics of Quartz Powder Reinforced Stir-Cast Aluminium-Zinc Alloy Metal Matrix Composites. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Kini, Achutha U and Sharma , S S and Jagannath, K and Prabhu, P R and Bhat, Chandrashekhar and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2014) Comparative Study of EPHO and CBTC as Corrosion Inhibitors for 15 vol. % 6061 al Alloy/SiCp Composite in 1 M Hydrochloric Acid Medium. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Prabhu, P R and Sharma, S S and Jagannath, K and Gowri Shankar, M C and Kini, Achutha U and Kulkarni, S M (2014) Design of Experiment Based Approach to Optimize Turn-Assisted Deep Cold Rolling Process Parameters. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Jagannath, K and Sharma , S S and Bhat, Chandrashekhar and Kini, Achutha U and Prabhu, Raghavendra B and Agarwal, Manish (2014) Energy Efficient Liquid Desiccant Cooling Systems. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Bhat, Chandrashekhar and Sharma , S S and Jagannath, K and Kini, Achutha U and Pandey, Sunil Kumar and Saravana, Venkatesh and Kumar, Praveen K S (2014) Waste Heat Recovery System for a Heavy Duty Six Cylinder Engine. In: 3rd World Conference on Applied Science, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Jagannath, K and Sharma , S S and Kini, Achutha U and Prabhu, P R and Manjesh, B (2014) Analysis of Cryogenic assisted Ammonia-water power Cycle. In: 2nd International Conference on Current Trends in Engineering and Management (ICCTEM-2014), 17-19, Mysore.

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K (2014) Surface layer alterations in AISI 4140 Steel from turn-assisted deep cold rolling process. In: Second international conference on Current Trends in Engineering and Management ICCTEM-2014, 17-19 July 2014, Vidyavardhaka College of Engineering, Mysore.

Kini, Achutha U and Sharma , S S and Jagannath, K and Prabhu, P R (2014) Inhibiting behaviour of MMATT on 6061 Al alloy–15 vol% SiC(p) Composite in HCl Solution. In: Proceedings of 2nd International Conference on Current trends in Engineering and Management (ICCTEM-2014), 17 – 19, July 2014, Mysore, Karnataka, India.

Kini, Achutha U and Jagannath, K and Sharma , S S and Bhat, Chandrashekhar and Shetty, Prakash and Shetty, Divakara S (2013) Corrosion Inhibition of AA 6061 in Acidic Medium using Ethyl-2-Phenyl- hydrozono-3-oxobutyrate. In: 3rd International Conference on Mechanical, Automotive and Materials Engineering (ICMAME'2013), April 29-30, 2013 , Singapore.

Bhat, Chandrashekhar and Deepak, P D and Ramakumar, B V N and Jagannath, K and Sharma , S S and Kini, Achutha U (2013) Design and Analysis of Nozzle Ribs in a Gas Turbine. In: 3rd International Conference on Mechanical, Automotive and Materials Engineering (ICMAME'2013), April 29-30, 2013 , Singapore.

Sharma , S S and Jagannath, K and Bhat, Chandrashekhar and Kini, Achutha U and Prabhu, P R and Jayashree, P K and Gowri Shankar , M C (2013) Effect of Heat Treatment on Mechanical Properties of AISI 4147 Spring Steel. In: 3rd International Conference on Mechanical, Automotive and Materials Engineering (ICMAME'2013), April 29-30, 2013, Singapore.

Jagannath, K and Sharma , S S and Bhat, Chandrashekhar and Kini, Achutha U and Prakash, Prannoy (2013) Traction Control System – An Integrated Safety for Two Wheeler. In: 3rd International Conference on Mechanical, Automotive and Materials Engineering (ICMAME'2013, April 29-30, 2013 , Singapore.

Sharma , S S and Jagannath, K and Bhat, Chandrashekhar and Prabhu, P R (2012) Age hardening and Thermomechanical Treatment of Stircast Iron Powder Reinforced Al Alloy Metal Matrix Composites. In: International Conference on Mechanical, Production and Materials Engineering (ICMPME'2012), June 16-17 , Bangkok.

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K and Bhat, Chandrashekhar (2012) Deep Cold Rolling Process on AISI 4140 Steel and Optimization of Surface Roughness by Response Surface Methodology. In: International Conference on Mechanical, Production and Materials Engineering (ICMPME'2012, June 16-17, Bangkok.

Bhat, Chandrashekhar and Anoop, A D and Gopinath, K and Jagannath, K and Sharma , S S and Prabhu, P R (2012) Experimental Investigation of Surface Failure and Fatigue Life of Boron Steel. In: International Conference on Mechanical, Production and Materials Engineering (ICMPME'2012), June 16-17, Bangkok.

Jagannath, K and Sharma , S S and Bhat, Chandrashekhar and Prabhu, P R (2012) Thermal Expansion Coefficient for Lead- Graphite and Lead-Iron Metal Matrix Composites. In: International Conference on Mechanical, Production and Materials Engineering (ICMPME'2012), June 16-17, Bangkok.

Mohan, N S and Jagannath, K and Sharma , S S and Bhat, Chandrashekhar (2011) Optimization of drilling conditions of Glass fibre reinforced plastic composite material using genetic algorithm. In: The Nineteenth Annual Int.Conf. on Composites or Nano Engg.(ICCE 19, July 24-30,2011, SHANGHI, CHAINA.

Bhat, Chandrashekhar and Sharma , S S and Jagannath, K and Mohan, N S and Sathisha, S G (2011) Prediction of Sound Attenuation Characteristics of Mufflers. In: The Nineteenth Annual Int.Conf. on Composites or Nano Engg.(ICCE 19, July 24-30, SHANGHI, CHAINA.

Jagannath, K and Sharma , S S and Mohan, N S and Prabhu, P R (2011) Stir Casting Technique for Low Melting Point Metal Matrix Composities and Characteristic Study. In: The Nineteenth Annual Int.Conf. on Composites or Nano Engg.(ICCE 19), July 24-30, Shanghi, Chaina.

Sharma , S S and Jagannath, K and Mohan, N S and Bhat, Chandrashekhar and Prabhu, P R and Chadaga, R C (2011) Thermomechanical and Precipitation Hardening of Stir-Cast Silica Reinforced Aluminium alloy Matrix Composites. In: The Nineteenth Annual Int.Conf. on Composites or Nano Engg.(ICCE 19), July 24-30, Shanghi, Chaina.

Raghunandana, K and Jagannath, K and Chincholkar, A M (2006) Stability of Journal Bearings with a Load in an Arbitrary Direction: A Non-Linear Transient Analysis. In: Proceedings of IJTC 2006 STLE/ASME Tribology Conference, Oct 22-25 2006, San Atonia, TX, USA.

Jagannath, K and Raghunandana, K and Chincholkar, A M (2004) Transient Analysis of journal bearings operating with non-Newtonian lubricants under different loading conditions. In: International Conference on Advanced Tribology, 1-3 December, National University of Singapore, Singapore.

This list was generated on Mon Nov 29 05:30:47 2021 UTC.