Items where Author is "Jayashree, P K"
Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 31.

Article

Hiremath, Pavan and Kini, Achutha U and Shettar, Manjunath and Sharma, S S and Jayashree, P K (2021) Investigation on tensile properties and analysis of wear property of glass fiber-epoxy-nonclay ternary nanocomposite using response surface methodology. Cogent Engineering, 8. ISSN 2331-1916

Jayashree, P K and Gowri Shankar, M C and Sharma, S S and Shetty, Raviraj and Hiremath, Pavan and Shettar, Manjunath (2021) The effect of SiC content in aluminum-based metal matrix composites on the microstructure and mechanical properties of welded joints. Journal of Materials Research and Technology, 12. pp. 2325-2339. ISSN 2238-7854

Jayashree, P K and Gowri Shankar, M C and Sharma, S S and Shetty, Raviraj and Shettar, Manjunath and Hiremath, Pavan (2020) Influence of homogenization and aging on tensile strength and fracture behavior of TIG welded Al6061-SiC composites. Journal of Materials Research and Technology, 9 (3). pp. 3598-3613. ISSN 2238-7854

Gowri Shankar, M C and Kumar, Nitesh and Jayashree, P K (2019) Numerical analysis of viscoelastic Propellant grains subjected to Pressure load. International Journal of Mechanical Engineering and Technology, 10 (1). pp. 1521-1527. ISSN 0976-6340

Gowri Shankar, M C and Shivapraksh, G and Jayashree, P K and Gurumurthy, B M (2019) Study on tensile strength on Artificially aged al-mg-si alloy using Taguchi’s technique. International Journal of Mechanical Engineering and Technology, 10 (1). pp. 1312-1320. ISSN 0976-6340

Jayashree, P K and Sharma, S S and Shetty, Raviraj and Gowri Shankar, M C (2018) The Hardness Behaviour of Tig Welded Al6061 Alloy Using Statistical Tool. Iranian Journal of Material Science and Engineering, 15 (02). pp. 88-96. ISSN 2251-7510

Jayashree, P K and Sharma, S S and Shetty, Raviraj (2018) Effect of Post Welded Heat Treatment on Tungsten Inert Gas Welded Al6061-SiC Composites. International Journal of Mechanical Engineering and Robotics Research, 7 (4). pp. 331-337. ISSN 2278-0149

Gowri Shankar, M C and Jayashree, P K and Sharma, S S and Kini, Achutha U (2018) Effect of precipitation hardening on stir cast. International Journal of Mechanical and Production, 8 (5). pp. 459-466. ISSN 2249-6890

Gowri Shankar, M C and Shettar, Manjunath and Sharma, S S and Kini, Achutha U and Jayashree, P K (2018) Enhancement in Hardness and Influence of Artificial Aging on Stir Cast Al6061-B4C and Al6061-SiC Composites. Materials Today: Proceedings, 5 (1P3). pp. 2435-2443. ISSN 2214-7853

Gowri Shankar, M C and Jayashree, P K and Sharma, S S and Shetty, Raviraj and Vinay, K (2018) Quality Enhancement of TIG Welded Al6061 SiCp Composites by Age Hardening Process. International Journal of Automotive and Mechanical Engineering, 15 (3). pp. 5573-5582. ISSN 2229-8649

Jayashree, P K and Sharma, S S and Shetty, Raviraj (2017) Effect of Homogenizing and Age Hardening on Mechanical PropertyEnhancement of TIG Welded Al6061 SiCp Composites. Materials Science Forum, 909. pp. 89-93. ISSN 1662-9752

Gowri Shankar, M C and Sharma, S S and Kini, Achutha U and Jayashree, P K and Gurumurthy, B M (2016) Study of Wear Behavior and Mechanical Mixed Layer on Artificial Aged Al6061 Composite Reinforced with B4C Particles. Indian Journal of Science and Technology, 9 (12). ISSN 0974-6846

Shivaprakash, Y M and Jayashree, P K and Gowri Shankar, M C and Gurumurthy, B M and Hiremath, Anupama and Prasad, Sreenivasa K V (2016) Experimental Studies on Heat Treated AA6061+GCI Composite. Indian Journal of Science and Technology. ISSN 0974-6846

Gurumurthy, B M and Hiremath, Anupama and Shivaprakash, Y M and Gowri Shankar, M C and Jayashree, P K (2016) Self- Healing Materials, A New Era In Material Technology: A Review. International Journal of Applied Engineering Research, 11 (2). pp. 1934-1399. ISSN 0973-4562

Sharma, S S and Jagannath, K and Bhat, Chandrashekhar and Kini, Achutha U and Prabhu, P R and Gowri Shankar, M C and Jayashree, P K (2015) Age Hardening and Cold Deformation Assisted Aging Treatment on the Characteristics of Quartz Powder Reinforced Stir-Cast Aluminium-Zinc Alloy Metal Matrix Composites. International Journal of Industrial and Mechanical Engineering Sciences, 1 (1). 01-05.

Shivaprakash, Y M and Gurumurthy, B M and Sharma, S S and Jayashree, P K and Gowri Shankar, M C (2015) Production, testing and microstructural investigation on Fly ash reinforced Aluminium alloy matrix composite. International Journal of Applied Engineering Research, 10 (20). pp. 41583-41590. ISSN 0973-4562

Gowri Shankar , M C and Jayashree, P K and Kini, Achutha U and Sharma , S S (2014) Effect of Silicon oxide (SIO2) Reinforced particles on ageing behavior of AI-2024 Alloy. International Journal Of Mechanical Engineering And Technology , 5 (9). pp. 15-21. ISSN 0976 – 6359

Sharma , S S and Prabhu, P R and Jayashree, P K and Gowri Shankar , M C and Porwal, Suvit and Singh, Harshdeep (2013) The Tensile and Wear Property Enhancement of Al – Zn –Mg Alloys by Precipitation Hardening and Thermomechanical Treatments. International Journal of Current Engineering and Technology, 3 (4). pp. 1510-1515. ISSN 2277 - 4106

Gowri Shankar, M C and Jayashree, P K and Shetty, Raviraj and Kini, Achutha U and Sharma , S S (2013) Individual and Combined Effect of Reinforcements on Stir Cast Aluminium Metal Matrix Composites-A Review. International Journal of Current Engineering and Technology, 3 (3). pp. 922-934. ISSN 2277 - 4106

Jayashree, P K and Gowri Shankar, M C and Kini, Achutha U and Sharma , S S and Shetty, Raviraj (2013) Review on Effect of Silicon Carbide (SiC) on Stir Cast Aluminium Metal Matrix Composites. International Journal of Current Engineering and Technology, 3 (3). pp. 1061-1071. ISSN 2277 - 4106

Gowri Shankar , M C and Shivaprakash, Y M and Jayashree, P K and Sharma , S S (2013) Study on Chip-morphology in Turning of Ti-6Al-4V Alloy under High Pressure Neat oil and Soluble oil. International Journal of Earth Sciences and Engineering, 6 (4). pp. 832-837. ISSN 0974-5904

Sharma , S S and Jagannath, K and Bhat, Chandrashekhar and Kini, Achutha U and Prabhu, P R and Jayashree, P K and Gowri Shankar , M C (2013) Improvement in Mechanical Properties of AISI 4147 Spring Steel through Heat Treatment Technique. International Journal of Research in Engineering and Technology (IJRET), 2 (3). pp. 127-131. ISSN 2277 – 4378

Book Section

Shivaprakash, Y M and Gurumurthy, B M and Sharma, S S and Jayashree, P K and Gowri Shankar, M C (2017) Production, Testing and Microstructural Investigation on Fly ash Reinforced Aluminium Alloy Matrix Composite. In: Advanced Engineering Research and Applications 79. Research India Publications, pp. 78-98.

Conference or Workshop Item

Jayashree, P K and Sharma, S S and Shetty, Raviraj (2017) Effect of Homogenizing and Age Hardening on Mechanical Property Enhancement of TIG Welded Al6061 SiCp Composites. In: Asia Conference on Mechanical and Materials Engineering, 09/06/2017, Tokyo, Japan.

Jayashree, P K and Sharma, S S and Shetty, Raviraj and Mahato, Ashish and Gowri Shankar, M C (2017) Optimization of TIG welding parameters for 6061Al alloy using Taguchi’s design of experiments. In: International Conference on Advanced Materials and Applications (ICAMA 2017), 2017, Bangalore.

Sharma, S S and Jagannath, K and Bhat, Chandrashekhar and Kini, Achutha U and Prabhu, P R and Jayashree, P K and Gowri Shankar, M C (2014) Age Hardening and Cold Deformation Assisted Aging Treatment on the Characteristics of Quartz Powder Reinforced Stir-Cast Aluminium-Zinc Alloy Metal Matrix Composites. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Gowri Shankar , M C and Jayashree, P K and Kini, Achutha U and Sharma , S S (2014) Effect of silicon oxide (SIO2) reinforced Particles on ageing behavior of AI-2024 Alloy. In: 2nd International Conference on Current Trends in Engineering and Management (ICCTEM-2014), 17-19, Mysore.

Jayashree, P K and Shetty, Raviraj and Sharma , S S and Shetty, Divakara S (2014) Optimization of Process Parameters during Tungsten Inert Gas Welding of 6061 Aluminum Alloy Using Design of Experiments. In: Proceedings of International conference on Computational Methods in Engineering and Health Sciences, December 17-19 2014.

Sharma , S S and Jagannath, K and Bhat, Chandrashekhar and Kini, Achutha U and Prabhu, P R and Jayashree, P K and Gowri Shankar , M C (2013) Effect of Heat Treatment on Mechanical Properties of AISI 4147 Spring Steel. In: 3rd International Conference on Mechanical, Automotive and Materials Engineering (ICMAME'2013), April 29-30, 2013, Singapore.

Gowri Shankar , M C and Prakash, Shiva and Jayashree, P K and Sharma , S S (2013) Study on Chip-morphology in Turning of Ti-6Al-4V Alloy Under High Pressure Neat oil and Soluble oil. In: 3rd International Engineering Symposium - IES 2013, March 4-6, 2013, Kumamoto University, Japan.

Sharma , S S and Prabhu, P R and Jayashree, P K and Gowri Shankar , M C (2013) The Tensile and wear property Enhancement of AL–ZN–MG Alloys by Precipitation Hardening and Thermomechanical Treatments. In: 3rd International Conference On Recent Advances in Material Processing Technology (RAMPT’13), 7th to 9th January 2013, Kovilpatti, Tamilnadu.

This list was generated on Wed Dec 1 19:03:34 2021 UTC.