Items where Author is "Prabhu, P R"
Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 72.

Article

Prabhu, P R and Hiremath, Pavan and Prabhu, Deepa and Gowrishankar, M C and Gurumurthy, B M (2021) Chemical, electrochemical, thermodynamic and adsorption study of EN8 dual‑phase steel with ferrite‑martensite structure in 0.5 M H2SO4 using pectin as inhibitor. Chemical Papers, 75. pp. 6083-6099. ISSN 0366-6352

Prabhu, P R and Prabhu, Deepa and Chaturvedi, Ayush and Dodhia, Priyank Kishore (2021) Corrosion inhibition of ferrite bainite AISI1040 steel in H2SO4 using biopolymer. Cogent Engineering, 8 (1). ISSN 2331-1916

Hiremath, Pavan and Gowri Shankar, M C and Shettar, Manjunath and Sharma, S S and Prabhu, P R and Kumar, Nitesh (2021) Effect of Microstructure, Phase Formation on the Mechanical and Surface Characteristics of Low Alloy Medium Carbon Forged Steels – A Review. International Review of Mechanical Engineering, 15 (6). ISSN 19708734

Prabhu, Deepa and Prabhu, P R and Padmalatha, * (2021) Thermodynamics, adsorption, and response surface methodology investigation of the corrosion inhibition of aluminum by Terminalia chebula Ritz. extract in H3PO4. Chemical Papers, 75. pp. 653-667. ISSN 0366-6352

Prabhu, P R and Prabhu, Deepa and Padmalatha, * (2020) Analysis of Garcinia indica Choisy extract as eco-friendly corrosion inhibitor for aluminum in phosphoric acid using the design of experiment. Journal of Materials Research and Technology, 9 (3). pp. 3622-3631. ISSN 2238-7854

Prabhu, P R and Kulkarni, S M and Sharma, S S (2020) Multi-response optimization of the turn-assisted deep cold rolling process parameters for enhanced surface characteristics and residual stress of AISI 4140 steel shafts. Journal of Materials Research and Technology, 9. pp. 11402-11423. ISSN 2238-7854

Prabhu, P R and Prabhu, Deepa and Padmalatha, * (2020) Optimization of the parameters influencing the inhibition efficiency of 6063 al alloy in 0.5 m naoh using response surface methodology. International Journal of Mechanical and Production, 10 (2). pp. 51-64. ISSN 2249-6890

Kini, Achutha U and Sharma, S S and Jagannath, K and Prabhu, P R and Bhat, Chandrashekhar and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2016) Comparative Study of EPHO and CBTC as Corrosion Inhibitors for 15 vol. % 6061 al Alloy/SiCp Composite in 1 M Hydrochloric Acid Medium. International journal of industrial and Mechanical Engineering Sciences, 2 (1). pp. 5-9.

Prabhu, P R and Sharma, S S and Jagannath, K and Gowri Shankar, M C and Kini, Achutha U and Kulkarni, S M (2016) Design of Experiment Based Approach to Optimize Turn-Assisted Deep Cold Rolling Process Parameters. International Journal of Industrial and Mechanical Engineering Sciences, 2 (1). pp. 17-23.

Jagannath, K and Sharma, S S and Prabhu, P R and Gowri Shankar, M C and Harisha, S R (2016) Effect of Artificial Aging on Fracture Behavior of Al6061-Silica (SiO2) Composites. Materials Science Forum, 880 (1). pp. 59-62. ISSN 1662-9752

Sharma, S S and Jagannath, K and Prabhu, P R and Gowri Shankar, M C and Harisha, S R and Kini, Achutha U (2016) Metallography & Bulk Hardness of Artificially Aged Al6061-B4C-SiC Stir Cast Hybrid Composites. Materials Science Forum, 880 (1). pp. 140-143. ISSN 1662-9752

Sharma , S S and Gowri Shankar , M C and Kini, Achutha U and Shivaprakash, Y M and Prabhu, P R (2015) Microstructure and sliding wear behaviour of stircast Ti-gr and Ti –Fe metal matrix composites. International Journal of Research in Engineering and Technology, 04 (02). pp. 222-227. ISSN 2319-1163

Sharma, S S and Jagannath, K and Bhat, Chandrashekhar and Kini, Achutha U and Prabhu, P R and Gowri Shankar, M C and Jayashree, P K (2015) Age Hardening and Cold Deformation Assisted Aging Treatment on the Characteristics of Quartz Powder Reinforced Stir-Cast Aluminium-Zinc Alloy Metal Matrix Composites. International Journal of Industrial and Mechanical Engineering Sciences, 1 (1). 01-05.

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K and Kini, Achutha U (2015) Analysis of Surface Hardness, Surface Roughness, and Near Surface Microstructure of AISI 4140 Steel Worked with Turn-Assisted Deep Cold Rolling Process. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9 (6). pp. 999-1005.

Kini, Achutha U and Sharma, S S and Jagannath, K and Prabhu, P R and Gowri Shankar, M C (2015) Characterization Study of Aluminium 6061 Hybrid Composite. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 9 (6). pp. 578-582.

Gowri Shankar, M C and Kini, Achutha U and Sharma, S S and Prabhu, P R (2015) Effect of SiC particulate reinforcement on the precipitation hardening behavior of two step stir cast Al 6061 alloy. International Journal of Applied Engineering Research, 10 (78). pp. 19-24. ISSN 0973-4562

Sharma , S S and Prabhu, P R and Jagannath, K and Kini, Achutha U and Gowri Shankar , M C (2015) Enhancement of Hardness Related Properties of Grey Cast Iron Powder Reinforced AA7075 Metal Matrix Composites through T6 and T8 Heat Treatments. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 9 (6). pp. 675-681.

Gowri Shankar, M C and Kini, Achutha U and Sharma, S S and Prabhu, P R (2015) Influence of aging temperature and aging time on the mechanical property and microstructure during precipitation hardening of Al 6061 alloy. International Journal of Applied Engineering Research, 10 (78). pp. 25-31. ISSN 0973-4562

Jagannath, K and Kotian, Akhilesh and Sharma , S S and Kini, Achutha U and Prabhu, P R (2015) Investigation of Bubble Growth during Nucleate Boiling Using CFD. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9 (6). pp. 988-992.

Prabhu, P R and Sharma, S S and Kulkarni, S M and Gowri Shankar, M C (2015) Turn-assisted Deep Cold Rolling: An Innovative Manufacturing Method for the improvement of fatigue life. International Journal of Applied Engineering Research, 10 (78). pp. 64-68. ISSN 0973-4562

Sharma , S S and Jagannath, K and Prabhu, P R and Gowri Shankar , M C (2014) Mechanical property assessment of austempered and Conventionally hardened AISI 4340 Steel. International Journal Of Mechanical Engineering And Technology , 5 (9). 08-14. ISSN 0976 – 6359

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K (2014) Surface layer alterations in AISI 4140 steel from turn-assisted deep cold rolling process. International Journal Of Mechanical Engineering And Technology , 5 (9). pp. 245-250. ISSN 0976 – 6359

Prabhu, P R and Kulakarni, Satyabodh and Sharma , S S (2014) Turn-assisted deep cold rolling - a cost effective mechanical surface treatment technique for surface hardness enhancement. Journal of Manufacturing Engineering, 9 (1). 022-029.

Sharma , S S and Prabhu, P R and Jayashree, P K and Gowri Shankar , M C and Porwal, Suvit and Singh, Harshdeep (2013) The Tensile and Wear Property Enhancement of Al – Zn –Mg Alloys by Precipitation Hardening and Thermomechanical Treatments. International Journal of Current Engineering and Technology, 3 (4). pp. 1510-1515. ISSN 2277 - 4106

Jagannath, K and Sharma , S S and Mohan, N S and Prabhu, P R (2013) Characteristic study for low melting point MMC using stir casting technique. World Journal of Engineering, 10 (6). pp. 529-534. ISSN 1708-5284

Sharma , S S and Jagannath, K and Bhat, Chandrashekhar and Kini, Achutha U and Prabhu, P R and Jayashree, P K and Gowri Shankar , M C (2013) Improvement in Mechanical Properties of AISI 4147 Spring Steel through Heat Treatment Technique. International Journal of Research in Engineering and Technology (IJRET), 2 (3). pp. 127-131. ISSN 2277 – 4378

Sharma , S S and Jagannath, K and Prabhu, P R (2013) Microstructure and Mechanical Characterization of Heat Treated Stir Cast Silica (Sea Sand) Reinforced 7XXX Al Alloy MMCs. World Academy of Science, Engineering and Technology, 7 (1). pp. 1356-1361. ISSN 2010-3778

Sharma , S S and Jagannath, K and Bhat, Chandrashekhar and Prabhu, P R (2012) Cold Deformation Effect on the Conventionally Aged Stircast Iron Powder Reinforced Aluminum Alloy Metal Matrix Composites. International Journal of Research in Engineering and Technology, 1 (3). ISSN 2277 – 4378

Prabhu, P R and Kulkarni, S M and Sharma , S S (2012) Experimental Investigations of Process Parameters Influence on Surface Roughness in Deep Cold Rolling of AISI 4140 Steel. International Journal of Research in Engineering and Technology, 1 (3). pp. 159-163. ISSN 2277 – 4378

Bhat, Chandrashekhar and Anoop, A D and Gopinath, K and Jagannath, K and Sharma , S S and Prabhu, P R (2012) Surface Failure and Fatigue Life investigation of Boron Steel. International Journal of Research in Engineering and Technology, 1 (3). pp. 167-171. ISSN 2277 – 4378

Prabhu, P R and Kulkarni, S M and Sharma , S S (2011) Mechanical Surface Enhancement (MSE) Techniques for Fatigue Life Improvement-A Review. Journal of Manufacturing Engineering,, 6 (4). pp. 211-219.

Prabhu, P R and Kulkarni, S M and Sharma , S S (2011) An Experimental Investigation on the Effect of Deep cold Rolling Parameters on Surface Roughness and Hardness of AISI 4140 Steel. World Academy of Science, Engineering and Technology, 60. pp. 1594-1598. ISSN 2010-3778

Prabhu, P R and Kulkarni, S M and Sharma , S S (2010) Influence of deep cold rolling and low plasticity burnishing on surface hardness and surface roughness of AISI 4140 steel. World Academy of Science, Engineering and Technology, 72. pp. 619-624. ISSN 2010-3778

Jagannath, K and Sharma , S S and Mohan, N S and Prabhu, P R (2010) Stir Casting Technique for low Melting point Metal Matrix Composites and Characteristic study. World Journal of Engineering, 7 (3). pp. 511-5121. ISSN 1708-5284

Sharma , S S and Prabhu, P R and Chadaga, R C (2010) Thermal treatments & characteristics study on unalloyed structural (AISI 1140) steel. World Academy of Science, Engineering and Technology, 70. pp. 770-775. ISSN 2010-3778

Sharma , S S and Jagannath, K and Mohan, N S and Bhat, Chandrashekhar and Prabhu, P R and Chadaga, R C (2010) Thermomechanical and Precipitation Hardening of Stir-Cast Silica Reinforced Aluminium alloy Matrix Composites. World Journal of Engineering, 7 (3). pp. 1007-1008. ISSN 1708-5284

Conference or Workshop Item

Sharma, S S and Gowri Shankar, M C and Kini, Achutha U and Jagannath, K and Prabhu, P R (2016) Aging and Mechanical Characteristics of Precipitation Hardening Stir cast Al6061 Hybrid Composite. In: International multidisciplinary research conference, 02/02/2016, Colombo.

Jagannath, K and Sharma, S S and Prabhu, P R and Gowri Shankar, M C and Harisha, S R (2016) Effect of Artificial aging on Fracture behavior of Al6061- Silica (SiO2) composites. In: 4th Asia conference on Mechanical and Materials Engineering, 14/07/2016, Kuala Lumpur, Malaysia.

Sharma, S S and Jagannath, K and Prabhu, P R and Gowri Shankar, M C and Harisha, S R and Kini, Achutha U (2016) Metallography & Bulk Hardness of Artificially Aged Al6061-B4C-SiC Stir Cast Hybrid Composites. In: 4th Asia conference on Mechanical and Materials Engineering, 14/07/2016, Kuala Lumpur, Malaysia.

Gowri Shankar , M C and Kini, Achutha U and Sharma , S S and Prabhu, P R (2015) Effect of SiC particulate reinforcement on the precipitation hardening behavior of two step stir cast Al 6061 alloy. In: International Conference on Emerging Trends in Mechanical & Industrial Engineering, JULY 18, 2015, ITM University, Gurgaon, Haryana.

Gowri Shankar , M C and Kini, Achutha U and Sharma , S S and Prabhu, P R (2015) Influence of aging temperature and aging time on the mechanical property and microstructure during precipitation hardening of Al 6061 alloy. In: International Conference on Emerging Trends in Mechanical & Industrial Engineering, JULY 18, 2015, ITM University, Gurgaon, Haryana.

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K and Kini, Achutha U (2015) Analysis of Surface Hardness, Surface Roughness and Near Surface Microstructure of AISI 4140 Steel Worked with Turn-Assisted Deep Cold Rolling Process. In: International Conference on Mechanical, Aeronautical and Manufacturing Engineering, June 4-5, 2015, New York, USA.

Kini, Achutha U and Sharma , S S and Jagannath, K and Prabhu, P R and Gowri Shankar , M C (2015) Characterization Study of Aluminium 6061 Hybrid Composite. In: International Conference on Mechanical,Aeronautical and Manufacturing Engineering, June, 4-5, 2015, New York, USA.

Jagannath, K and Kotian, Akhilesh and Sharma , S S and Kini, Achutha U and Prabhu, P R (2015) Investigation of Bubble Growth During Nucleate Boiling Using CFD. In: International Conference on Mechanical,Aeronautical and Manufacturing Engineering, June, 4-5, 2015, New York, USA.

Sharma , S S and Prabhu, P R and Jagannath, K and Kini, Achutha U and Gowri Shankar , M C (2015) Enhancement of Hardness Related Properties of Grey Cast Iron Powder Reinforced AA7075 Metal Matrix Composites through T6 and T8 Heat Treatments. In: International Conference on Mechanical, Aeronautical and Manufacturing Engineering, June 4-5, 2015, New York, USA.

Prabhu, P R and Sharma , S S and Kulkarni, S M and Gowri Shankar , M C (2015) Turn-assisted Deep Cold Rolling: An Innovative Manufacturing Method for the improvement of fatigue life. In: International Conference on Emerging Trends in Mechanical & Industrial Engineering, JULY 18, 2015, ITM University, Gurgaon, Haryana.

Sharma, S S and Jagannath, K and Bhat, Chandrashekhar and Kini, Achutha U and Prabhu, P R and Jayashree, P K and Gowri Shankar, M C (2014) Age Hardening and Cold Deformation Assisted Aging Treatment on the Characteristics of Quartz Powder Reinforced Stir-Cast Aluminium-Zinc Alloy Metal Matrix Composites. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Kini, Achutha U and Sharma , S S and Jagannath, K and Prabhu, P R and Bhat, Chandrashekhar and Shetty, Prakash and Shetty, Divakara S and Isloor, Arun M (2014) Comparative Study of EPHO and CBTC as Corrosion Inhibitors for 15 vol. % 6061 al Alloy/SiCp Composite in 1 M Hydrochloric Acid Medium. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Prabhu, P R and Sharma, S S and Jagannath, K and Gowri Shankar, M C and Kini, Achutha U and Kulkarni, S M (2014) Design of Experiment Based Approach to Optimize Turn-Assisted Deep Cold Rolling Process Parameters. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Jagannath, K and Sharma , S S and Kini, Achutha U and Prabhu, P R and Manjesh, B (2014) Analysis of Cryogenic assisted Ammonia-water power Cycle. In: 2nd International Conference on Current Trends in Engineering and Management (ICCTEM-2014), 17-19, Mysore.

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K (2014) Surface layer alterations in AISI 4140 Steel from turn-assisted deep cold rolling process. In: Second international conference on Current Trends in Engineering and Management ICCTEM-2014, 17-19 July 2014, Vidyavardhaka College of Engineering, Mysore.

Sharma , S S and Prabhu, P R and Gowri Shankar , M C and Sudhakar, A V B (2014) Mechanical Property Assessment of Austempered and Conventionally Hardened AISI 4340 Steel. In: Second international conference on Current Trends in Engineering and Management ICCTEM-2014, 17-19 July 2014, Vidyavardhaka College of Engineering, Mysore.

Krishna Kumar, P and Adhikari, Raviraj and Prabhu, P R and Keni, Laxmikanth (2014) Deep cold rolling simulation of AISI 4140 steel using ANSYS LSDYNA. In: 3rd World Conference on Applied Sciences, Engineering and Technology, 27-29 September 2014, Kathmandu, Nepal.

Gowri Shankar , M C and Prabhu, P R and Kini, Achutha U and Sharma , S S (2014) Effects of Age Hardening Parameters on Hardness of Al 6061 Alloy Using Design of Experiments. In: Proceedings of International Conference on Computational Methods in Engineering and health Science, December 17-19 2014.

Kini, Achutha U and Sharma , S S and Jagannath, K and Prabhu, P R (2014) Inhibiting behaviour of MMATT on 6061 Al alloy–15 vol% SiC(p) Composite in HCl Solution. In: Proceedings of 2nd International Conference on Current trends in Engineering and Management (ICCTEM-2014), 17 – 19, July 2014, Mysore, Karnataka, India.

Sharma , S S and Jagannath, K and Bhat, Chandrashekhar and Kini, Achutha U and Prabhu, P R and Jayashree, P K and Gowri Shankar , M C (2013) Effect of Heat Treatment on Mechanical Properties of AISI 4147 Spring Steel. In: 3rd International Conference on Mechanical, Automotive and Materials Engineering (ICMAME'2013), April 29-30, 2013, Singapore.

Sharma , S S and Prabhu, P R and Jayashree, P K and Gowri Shankar , M C (2013) The Tensile and wear property Enhancement of AL–ZN–MG Alloys by Precipitation Hardening and Thermomechanical Treatments. In: 3rd International Conference On Recent Advances in Material Processing Technology (RAMPT’13), 7th to 9th January 2013, Kovilpatti, Tamilnadu.

Prabhu, P R and Kulkarni, S M and Sharma , S S (2012) Influence of deep cold rolling and low plasticity burnishing on surface hardness and surface roughness of AISI 4140 steel. In: International Conference on Mechanical and Industrial Engineering (ICMIE 2010, August 25-27, Singapore.

Sharma , S S and Jagannath, K and Bhat, Chandrashekhar and Prabhu, P R (2012) Age hardening and Thermomechanical Treatment of Stircast Iron Powder Reinforced Al Alloy Metal Matrix Composites. In: International Conference on Mechanical, Production and Materials Engineering (ICMPME'2012), June 16-17 , Bangkok.

Prabhu, P R and Kulkarni, S M and Sharma , S S and Jagannath, K and Bhat, Chandrashekhar (2012) Deep Cold Rolling Process on AISI 4140 Steel and Optimization of Surface Roughness by Response Surface Methodology. In: International Conference on Mechanical, Production and Materials Engineering (ICMPME'2012, June 16-17, Bangkok.

Bhat, Chandrashekhar and Anoop, A D and Gopinath, K and Jagannath, K and Sharma , S S and Prabhu, P R (2012) Experimental Investigation of Surface Failure and Fatigue Life of Boron Steel. In: International Conference on Mechanical, Production and Materials Engineering (ICMPME'2012), June 16-17, Bangkok.

Jagannath, K and Sharma , S S and Bhat, Chandrashekhar and Prabhu, P R (2012) Thermal Expansion Coefficient for Lead- Graphite and Lead-Iron Metal Matrix Composites. In: International Conference on Mechanical, Production and Materials Engineering (ICMPME'2012), June 16-17, Bangkok.

Jagannath, K and Sharma , S S and Mohan, N S and Prabhu, P R (2011) Stir Casting Technique for Low Melting Point Metal Matrix Composities and Characteristic Study. In: The Nineteenth Annual Int.Conf. on Composites or Nano Engg.(ICCE 19), July 24-30, Shanghi, Chaina.

Sharma , S S and Jagannath, K and Mohan, N S and Bhat, Chandrashekhar and Prabhu, P R and Chadaga, R C (2011) Thermomechanical and Precipitation Hardening of Stir-Cast Silica Reinforced Aluminium alloy Matrix Composites. In: The Nineteenth Annual Int.Conf. on Composites or Nano Engg.(ICCE 19), July 24-30, Shanghi, Chaina.

Prabhu, P R and Kulkarni, S M and Sharma , S S (2011) The effects of deep cold rolling and low plasticity burnishing process on surface hardness of AISI 4140 steel. In: National Conference on Advances in Mechanical Engineering, 03 – 05 January, MIT Manipal.

Prabhu, P R and Kulkarni, S M and Sharma , S S (2011) An investigation of the Surface topography of deep cold rolled aisi 4140 steel. In: National Conference on "Trends and Advances in Manufacturjng Engineering", 29-3rd' Sept.2011, TAME-20ll .

Sharma , S S and Prabhu, P R and Chadaga, RajGopal P (2010) Thermal treatments & characteristics study on Unalloyed Structural (AISI 1140)steel. In: International Conference on Mechanical and Industrial Engineering (ICMIE 2010), August 25-27,, Singapore.

Prabhu, P R and Kulkarni, S M and Sharma , S S (2010) Development of a Low Cost Deep Cold Rolling (DCR)Set-up. In: International Conference on ‘Frontiers in Mechanical Engineering-FIME 2010’, 20-22 May, NITK, Surathkal.

Sharma , S S and Prabhu, P R (2009) The effect of trace element magnesium on the characteristics of age hardened and thermomechanically treated Al – Zn alloys. In: International Conference on Advances in Mechanical Engg.(ICAME 2009, June 24-25, Shahalam, MALAYSIA.

Sharma , S S and Prabhu, P R and Chadaga, RajGopal P (2009) Effect of thermo mechanical treatment on the Mechanical properties of 7XXX series Aluminium alloys. In: Proceedings of the National Conference on Advances in Mechanical Engineering 2009, 5 October 2009, MIT Manipal.

Sharma , S S and Prabhu, P R and Chadaga, RajGopal P (2008) Heat treatment & Characteristics study on EN 8 steel. In: National Conference On Advances in Mechanical Engg.- 2008, MIT Manipal.

Prabhu, P R and Kulkarni, S M and Sharma , S S Turning Aided Deep Cold Rolling - A Cost Effective Mechanical Surface Treatment Technique for Surface Hardness Enhancement. In: 3rd International Conference On Recent Advances in Material Processing Technology (RAMPT’13), 7th to 9th January 2013, Kovilpatti, Tamilnadu, India.

This list was generated on Tue Jan 25 05:33:56 2022 UTC.