Murthy, Amar A and Raghunandana, K (2022) Stability Analysis of a Lemon Bearing Operating with Nonnewtonian Lubricant Considering Slip between the Sliding Surfaces. Engineered Science, 18. pp. 288-298. ISSN 2576-988X

Prabhu, Aruna and Raghunandana, K and Pai, Yogesh P (2021) Investigation on the Performance of Order Release Methods in a Flow shop with Bottlenecks. Jordan Journal of Mechanical and Industrial Engineering, 15 (4). ISSN 1995-6665

Murthy, Amar A and Raghunandana, K (2019) A technical review on the study of stability analysis of Non-circular bearings lubricated with Newtonian/non-newtonian fluids. International Journal of Mechanical and Production, 9 (1). pp. 457-470. ISSN 2249-6890

Srinivas, G and Raghunandana, K and Shenoy, Satish B (2018) Flow blockage in a transonic axial flow compressor: simulation analysis under distorted conditions. International Journal of Engineering and Technology(UAE), 7 (221). pp. 43-49. ISSN 2227-524X

Srinivas, G and Raghunandana, K and Shenoy, Satish B (2018) Axial Flow Compressor Analysis under Distorted Phenomena at Transonic Flow Conditions. Cogent Engineering, 5 (1). pp. 1-20. ISSN 2331-1916

Potti Srinivasa, Rao and Viswanadhan, K G and Raghunandana, K (2018) Model of Excellence for the Young Self-financing Engineering Colleges in India: Faculty Members’ Perspective. Quality - Access to Success, 19 (162). pp. 73-81. ISSN 1582-2559

Sachidananda, H K and Raghunandana, K and Shivamurthy, B (2018) Power loss analysis in altered tooth-sum spur gearing. In: Power loss analysis in altered tooth-sum spur gearing, 21/12/2017.

Srinivas, G and Raghunandana, K and Shenoy, Satish B (2017) Flow Blockage in a Transonic Axial Flow Compressor: Simulation Analysis under Distorted Conditions. In: CISCON 2013, 03/11/2017, MIT, Manipal.

Srinivas, G and Raghunandana, K and Shenoy, Satish B (2017) Recent developments in turbomachinery component materials and manufacturing challenges for aero engine applications. In: International Conference on Advances in Metallurgy, Materials and Manufacturing, 06/03/2017, Hotel CJ Pallajio Salem.

Srinivas, G and Raghunandana, K and Shenoy, Satish B (2017) Recent developments of axial flow compressors under transonic flow conditions. Frontiers in Automobile and Mechanical Engineerin, 197. ISSN 1757-8981

Murthy, Amar A and Raghunandana, K (2017) Study of Dimple Effect on the Friction Characteristics of a Journal Bearing using Taguchi Method. In: International Conference on Advances in Metallurgy, Materials and Manufacturing, 06/03/2017, Hotel CJ Pallajio Salem.

Sachidananda, H K and Raghunandana, K and Shivamurthy, B (2017) Study of a supply chain system with the presence of bullwhip effect. In: International Conference on Research in Mechanical Engineering Sciences, 21/12/2017, MIT, Manipal.

Sachidananda, H K and Raghunandana, K and Shivamurthy, B (2016) Comparison of Meshing Stiffness of Altered Tooth Sum Spur Gear Tooth with Different Pressure Angles. In: International Conference on Aerospace, Mechanical, Automotive and Materials Engineering, 15/02/2016, Barcelona, Spain.

Sachidananda, H K and Raghunandana, K and Shivamurthy, B (2016) Comparison of meshing stiffness of altered tooth sum spur gear tooth with different pressure anglesR. International Journal of Mechanical,Arospace,Industrial, Mechatronic & Manufacturing Engineering, 10 (2). pp. 321-327.

Srinivas, G and Raghunandana, K and Shenoy, Satish B (2016) Recent Developments of Axial Flow Compressors Under Transonic flow Conditions. In: International Conference on Frontiers in Automobile and Mechanical Engineering, 17/06/2016, Sathyabama University, Chennai.

Potti Srinivasa, Rao and Viswanadhan, K G and Raghunandana, K (2016) Roadmaps to Excellence for the Young Self-financing Engineering Colleges in India. Quality - Access to Success, 17 (154). pp. 46-54. ISSN 1582-2559

Sachidananda, H K and Raghunandana, K and Gonsalvis, J (2016) Sliding velocity in profile-corrected gears. Lubrication Science, 29 (1). pp. 43-58. ISSN 0954-0075

Sachidananda, H K and Raghunandana, K (2016) Stiffness of an engaging spur gear pair in an altered tooth-sum spur gearing. In: Manipal University Research Colloquium, 04/04/2016, Manipal University.

Potti Srinivasa, Rao and Viswanadhan, K G and Raghunandana, K (2015) Best Practices for Quality Improvement—Lessons from Top Ranked Engineering Institutions. International Education Studies, 8 (11). pp. 169-183. ISSN 1913-9020

Sachidananda, H K and Raghunandana, K and Gonsalvis, J (2015) Design of Spur Gears using Profile Modification. Tribology Transactions, 58 (4). pp. 736-744. ISSN 1040-2004

Chakravarthy, Kalyana and Raghunandana, K (2015) Stress analysis of glass fibre reinforced composites used in wind turbines. In: Proceedings of 2nd International Conference on Recent Development In Mechanical, Production, Industrial And Automobile Engineering, 25th January 2015, Bangalore.

Potti Srinivasa, Rao and Viswanadhan, K G and Raghunandana, K and Shiva Prasad, H C (2014) A Few Unique Practices in High-Performance Engineering Colleges. International Journal of Research in Advent Technology, 2 (9). pp. 51-56. ISSN 2321-9637

Sunil, Kumar and Raghunandana, K (2014) Vibration Analysis of a Piping System Attached With Pumps and Subjected to Resonance. International Journal of Emerging Technology and Advanced Engineering, 4 (9). pp. 1-6. ISSN 2250-2459

Potti Srinivasa, Rao and Viswanadhan, K G and Raghunandana, K (2014) Anempirical study on the performance of self-financing Engineering colleges (autonomous and non-autonomous) - Ateacher’s perspective. International Journal of Management Research and Development, 4 (1). pp. 68-84. ISSN 2248 – 938X

Sachidananda, H K and Raghunandana, K (2014) Effect of Bending and Contact Stresses in Altered Tooth-Sum Gearing. International Journal of Emerging Technology and Advanced Engineering, 4 (9). pp. 7-12. ISSN 2250-2459

Potti Srinivasa, Rao and Raghunandana, K and Viwanadhan, K G and Shiva Prasad, H C (2013) An Empirical study on Skewness of test scores of a Management subject in an Autonomous engineering college – A case study. International Journal of Management Research and Management, 3 (2). pp. 83-93. ISSN 2248-9398

Raghunandana, K and John, * and Kantharaj, A N (2013) Stability of Journal Bearing considering Slip Bearing Condition;A Non-Linear Trasient Analysis. International Journal of Applied Science & Technology Research Excellence, 3 (1). pp. 46-50. ISSN 2250-2726

Potti Srinivasa, Rao and Raghunandana, K (2011) Autonomy of Technical Education: A Comparative Analysis through Teachers’ Outlook. Indian Journal of Technical Education, 34 (3). pp. 19-26.

Raghunandana, K and Corda, John V (2011) Static Characteristics of a Journal Bearing with Engineered Slip/No-Slip Surfaces. International Journal of Earth Sciences and Engineering, 4 (4). pp. 26-32. ISSN 0974-5904

Raghunandana, K and Corda, John V (2011) Static Characteristics of a Journal Bearing with Engineered Slip/no-slip Surfaces. In: International Engineering Symposium, IES , March 3 – 5, Kumomoto University, Japan..

Jagannath, K and Raghunandana, K and Chincholkar, A M (2007) Performance Characteristics of Two Lobe Bearings Operating with Non Newtonian Lubricants. Journal of Solid Mechanics and Materials Engineering, 1 (4). pp. 421-430. ISSN 1880 – 9871

Raghunandana, K (2007) Inverse Design Methodology for the Stability Design of Elliptical Bearings Operating with Non-Newtonian Lubricants. In: Proceedings of the World Congress on Engineering and Computer Science, October 24-26, San Francisco, USA.

Jagannath, K and Raghunandana, K and Chincholkar, A M (2007) Performance Characteristics of Two-Lobe bearings operating with non-Newtonian Lubricants. Journal of Solid Mechanics and Materials Engineering, 1 (4). pp. 421-430. ISSN 1880 – 9871

Jagannath, K and Raghunandana, K and Chincholkar, A M (2006) Performance Characteristics of two lobe bearings operating with non- Newtonian Lubricants. Journal of Solid Mechanics and Materials Engineering. pp. 421-430. ISSN 1880 – 9871

Raghunandana, K and Jagannath, K and Chincholkar, A M (2006) Stability of Journal Bearings with a Load in an Arbitrary Direction: A Non-Linear Transient Analysis. In: Proceedings of IJTC 2006 STLE/ASME Tribology Conference, Oct 22-25 2006, San Atonia, TX, USA.

Raghunandana, K and Majumdar, B C (2005) Comprehensive inverse design methodology of hydrodynamic Journal bearings. In: Proceedings of the International Conference on Recent Advances in Mechanical & Materials Engineering – ICRAMME 2005, May 30 – 31, University of Malaya, Kaulalampur..

Jagannath, K and Raghunandana, K and Chincholkar, A M (2004) Transient Analysis of journal bearings operating with non-Newtonian lubricants under different loading conditions. In: International Conference on Advanced Tribology, 1-3 December, National University of Singapore, Singapore.

Jagannath, K and Raghunandana, K and Chincholkar, A M (2004) Thermo hydrodynamic Analysis of steadily Loaded Journal Bearings. Journal of The Institution of Engineer (India) , 85. pp. 131-137. ISSN 0020 – 3408

Jagannath, K and Raghunandana, K and Chincholkar, A M (2004) Thermodynamic analysis of Steadily loaded Journal Bearings. Journal of the Institution of Engineers (India) Mechanical Engineering Division, 85. pp. 131-137. ISSN 0020-3408

Raghunandana, K and Majumdar, B C (2004) Non-linear analysis for the stability of flexibly supported oil journal bearings operating with non-newtonian lubricants. In: International Conference on Advanced Tribology, ICAT 2004., December 1-3, National University of Singapore, Singapore.

Raghunandana, K and Majumdar, B C and Maiti, R (2003) Stability of Flexibly Supported Oil Journal Bearings Using Non – Newtonian Lubricants: Comparison of Linear & Non – Linear Analysis. Journal of Tribology, 2 (1). pp. 1-6. ISSN 0742-4787

Raghunandana, K and Majumdar, B C and Maiti, R (2001) Stability of Flexibly Supported Oil Journal Bearings Using Non-Newtonian Lubricants: Linear Perturbation Analysis. Journal of Tribology, 123. pp. 651-654. ISSN 0742-4787

Raghunandana, K and Majumdar, B C and Maiti, R N (2000) Stability of Rigidly Supported Oil Journal Bearings Using non-Newtonian Lubricants: Comparison of Linear and Non-Linear Analysis. In: International Tribology Conference, ITC 2000, October 29 - November 2, , Japanese Society of Tribologists..

Raghunandana, K and Majumdar, B C (1999) Stability of journal bearing systems using non-Newtonian lubricants: a non-linear transient analysis. Tribology International, 32. pp. 179-184.

Raghunandana, K Editorial. STM Journals.