Items where Author is "Rao, Srikanth S"
Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 26.

Article

Rao, Karthik M C and Malghan, Rashmi L and Arunkumar, S and Rao, Srikanth S and Herbert, Mervin A (2019) An Efficient Approach to Optimize Wear Behavior of Cryogenic Milling Process of SS316 Using Regression Analysis and Particle Swarm Techniques. Transactions of the Indian Institute of Metals, 72 (1). pp. 191-204. ISSN 0972-2815

Prabhu, Subramanya R B and Shettigar, Arun Kumar and Rao, Karthik M C and Nigalye, Akshay and Herbert, Mervin A and Rao, Srikanth S (2015) Effect of process parameters on tensile strength of riction stir Welded al-cu-mg-si-sicp composite. International Journal of Researchers in Biosciences, Agriculture and Technology, 2 (7). pp. 5-10. ISSN 2347 – 517X

Shetty, Raviraj and Denim, Anajwal and Revankar, Goutam D and Rao, Srikanth S and Shetty, Divakara S (2014) Characterization of Microstructure and Tribological Study on Heat Treated Titanium alloy (Ti-6Al-4V). International Journal of Current Engineering and Technology, 4 (3). pp. 2183-2188. ISSN 2277 – 4106

Shetty, Raviraj and Jose, Tony K and Revankar, Goutam D and Rao, Srikanth S and Shetty, Divakara S (2014) Surface Roughness Analysis during Turning of Ti-6Al-4V under Near Dry Machining using Statistical Tool. International Journal of Current Engineering and Technology, 4 (3). pp. 2061-2067. ISSN 2277 – 4106

Revankar, Goutam D and Shetty, Raviraj and Rao, Srikanth S and Gaitonde, Vinayak N (2014) Analysis of Surface Roughness and Hardness in Titanium Alloy Machining with Polycrystalline Diamond Tool under Different Lubricating Modes. Materials Research, 17 (4). ISSN 1516-1439

Revankar, Goutam D and Shetty, Raviraj and Rao, Srikanth S and Gaitonde, Vinayak N (2014) Analysis of surface roughness and hardness in ball burnishing of titanium alloy. Measurement, 58. pp. 256-268.

Revankar, Goutam D and Shetty, Raviraj and Rao, Srikanth S and Gaitonde, Vinayak N (2014) Selection Of Optimal Process Parameters In Ball Burnishing Of Titanium Alloy. Machining Science and Technology - An international journal, 18. pp. 464-483. ISSN 532-2483

Shetty, Raviraj and Pai, Raghuvir B and Rao, Srikanth S (2009) Experimental Studies on Turning of Discontinuously Reinforced Aluminium Composites under Dry, Oil Water Emulsion and Steam Lubricated Conditions using TAGUCHI’s Technique. Journal of Science, 22 (1). pp. 21-32. ISSN 1303-9709

Shetty, Raviraj and Pai, Raghuvir B and Rao, Srikanth S and Nayak, Rajesh (2009) Taguchi’s Technique in Machining of Metal Matrix Composites. Taguchi’s Technique in Machining of Metal Matrix Composites, 31 (1).

Shetty, Raviraj and Keni, Laxmikanth and Pai, Raghuvir B and Rao, Srikanth S (2008) Finite element modeling of stress distribution in the cutting path in machining of discontinuously Reinforced aluminium composites. ARPN Journal of Engineering and Applied Sciences, 3 (4). pp. 25-31. ISSN 1819-6608

Shetty, Raviraj and Pai, Raghuvir B and Rao, Srikanth S and Kamath, Vasanth (2008) Machinability study on discontinuously reinforced aluminium Composites (DRACs) using response surface methodology and Taguchi’s design of experiments under dry cutting condition. Maejo International Journal of Science and Technology, 2 (01). pp. 227-239. ISSN 1905-7873

Shetty, Raviraj and Pai, Raghuvir B and Kamath, Vasanth and Rao, Srikanth S (2008) Study on surface roughness minimization in turning of DRACs using surface roughness methodology and taguchi under pressured steam jet approach. ARPN Journal of Engineering and Applied Sciences, 3 (1). pp. 59-67. ISSN 1819-6608

Shetty, Raviraj and Pai, Raghuvir B and Rao, Srikanth S (2008) Tribological studies on discontinuously reinforced aluminum composites based on the orthogonal arrays. ARPN Journal of Engineering and Applied Sciences, 3 (1). pp. 84-92. ISSN 1819-6608

Shetty, Raviraj and Pai, Raghuvir B and Kamath, Vasanth and Rao, Srikanth S (2008) Steam as coolant and lubricant in turning of metal matrix composites. Journal of Zhejiang University Science A , 9 (9). pp. 1245-1250. ISSN 1862-1775

Conference or Workshop Item

Prabhu, Subramanya R B and Shettigar, Arun Kumar and Rao, Karthik and Rao, Srikanth S and Herbert, Mervin A (2016) Influence of Welding Process Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Aluminium Matrix Composite. In: Asia Conference on Mechanical and Materials Engineering, 14/07/2016, Malaysia.

Prabhu, Subramanya R B and Shettigar, Arun Kumar and Rao, Karthik M C and Nigalye, Akshay and Herbert, Mervin A and Rao, Srikanth S (2015) Effect of process parameters on tensile strength of friction stir welded Al-Cu-Mg-Si-SiCp composite. In: International Conference on Science, engineering and Technology, 21/11/2015, Ras Al Khaimah, UAE Dubai.

Herbert, Mervin A and Shettigar, Arun Kumar and Nigalye, Akshay and Rao, Srikanth S (2015) Investigation on microstructure and mechanical properties of Friction Stir Welded AA6061-4.5Cu-10SiC composite. In: iMEC-APCOMS 2015, 12/11/2015, Swiss-Garden Hotel Kuala Lumpur.

Revankar, Goutam D and Shetty, Raviraj and Rao, Srikanth S and Gaitonde, Vinayak N (2013) Response Surface Model for Surface Roughness during Finish Turning of Titanium Alloy under Minimum Quantity Lubrication. In: International Conference on Emerging Trends in Engineering and Technology, 7th and 8th December 2013, Patong Beach, Phuket (Thailand).

Revankar, Goutam D and Shetty, Raviraj and Shetty, Divakara S and Rao, Srikanth S (2012) Mathematical modelling of burnishing force on ball burnishing of titanium alloy using response surface methodology. In: Proceedings of International Conference in Mechanical and Industrial Engineering, 19th August 2012, Goa.

Pai, Dayananda and Rao, Srikanth S and Shetty, Raviraj (2011) Studies on Application of Response Surface Methodology for the analysis of Specific Energy during grinding of DRAC‟s. In: National Conference on Advances in Mechanical Engineering, 03 – 05 January 2011, MIT Manipal.

Pai, Dayananda and Rao, Srikanth S and Shetty, Raviraj (2011) Multi-Objective Optimisation by Combination of Response Surface Methodology and Desirability Function for Grinding of DRACs. In: Proceedings of the International Conference on Design and Advances in Mechanical Engineering, 16 - 17 December, 2011., SKP Engineering College, Tiruvannamalai, TamilNadu., India.

Rai, Rajesh and Shetty, Raviraj and Rao, Srikanth S and Rao, Gangadar (2008) The statistical modeling of surface roughness in face milling of Hot work Chromium Steel (AISI H11). In: International Conference on Fascinating Advancement in Mechanical Engineering, 11-13, December 2008, Mepco Schlenk Engineering College, Sivakasi, India.

Vasudev, M and Rao, Srikanth S and Shetty, Raviraj and Pai, Raghuvir B (2007) Influence of lubrication condition on surface Roughness in turning of metal matrix composites. In: Proceedings of Sixth International Conference on composite science and technology , 2007, Durban, South Africa.

Shetty, Raviraj and Pai, Raghuvir B and Shenoy, B S and Rao, Srikanth S (2006) Study of tool wear in turning 15% SiCp reinforced 6061 aluminium metal matrix composite with steam as coolant. In: Proceedings of International conference on Advanced Material processing and characterization, Chennai, India.

Shetty, Raviraj and Pai, Raghuvir B and Barboza, A B V and Rao, Srikanth S (2006) Tribological studies on PCBN tool in turning metal matrix composites with steam as coolant. In: Proceedings of International Tribological conference (AUSTRIB 2006), 2006, Brisbane, Australia.

Shetty, Raviraj and Nayak, Rajesh and Pai, Raghuvir B and Rao, Srikanth S (2006) Tribological studies on steam penetration in different Directions in turning of metal matrix composites. In: International Conference on Industrial Tribology,ICIT-2006 , Nov 30th to 02nd December 2006, Indian Institute of Science, Bangalore.

This list was generated on Thu Jan 20 23:00:24 2022 UTC.